Results 1 to 7 of 7

Thread: Who/how much for panelbeating tank/repainting?

  1. #1
    Join Date
    24th September 2006 - 02:00
    Bike
    -
    Location
    -
    Posts
    4,736

    Who/how much for panelbeating tank/repainting?

    'Lo,

    Perhaps some of you have seen my thread about a gentleman knocking over my bike. Anyhow, the biggest chunk of money for repairs will be for taking some minor dents out of the tank and repainting it (and the tail section).

    Tail/sidecovers are fibreglass (yes, not original plastic. No, I don't know why).
    Tank is normal steel. Dent is very shallow, about where your knee goes (very disconcerting to ride). Will a normal car panel-beaters be able to take this out? There are are a few tiny dings on the RHS, these would have to be bogged I dare say.

    So, would a normal car panel-beaters be the best option? How much would I expect them to charge? $300-400 sound about right?

  2. #2
    Join Date
    17th November 2002 - 11:00
    Bike
    XB12R, FXR150, Ducati 400ss, 1125CR
    Location
    dam.. i move too much
    Posts
    5,047
    give the bike to luke.. he will panel beat both sides free of charge

    and throw in a blown engine for free also!


    what a ride so far!!!!

  3. #3
    Join Date
    29th January 2005 - 11:00
    Bike
    2006 Suzuki GSX-R750 K6
    Location
    Te Puke
    Posts
    2,970
    Frenchy (on this site) does a primo job of any panel beating. He has repaired two tanks of bikes that I have been involved in repairing, and another for a mate of mine. VERY tidy work
    Member, sem fiddy appreciation society


    Quote Originally Posted by PrincessBandit View Post
    I find it ironic that the incredibly rude personal comments about Les were made by someone bearing an astonishing resemblance to a Monica Lewinsky dress accessory.

    Quote Originally Posted by PrincessBandit View Post
    All was good until I realised that having 105kg of man sliding into my rear was a tad uncomfortable after a while

  4. #4
    Join Date
    24th September 2006 - 02:00
    Bike
    -
    Location
    -
    Posts
    4,736
    Quote Originally Posted by imdying View Post
    Just fill it full of bog and make it a plug for a glass tank
    Hahaha yes, I thought about doing this. However I do need some kind of figure to give the guy. If he does pay privately then I can do what I like with the money. Wonder how cheaply one can manufacture a RC166 replica tank/seat?

  5. #5
    Join Date
    21st April 2006 - 10:10
    Bike
    04 R6
    Location
    Auckland
    Posts
    1,059
    okay, from reflections (these guys are the nuts BTW, really good quality)

    for all the work (strip, bog paint) you are looking at:

    $300 for a tank
    $100 per side cover

    no idea about the tail section, i would assume about $200-250

    its not cheap, but man do they know their shit.

  6. #6
    Join Date
    24th September 2006 - 02:00
    Bike
    -
    Location
    -
    Posts
    4,736
    I spoke to the guy on the phone today. He was mean and nasty

    Anyway, I told him approximate figures for fixing the tank up, 'bout $300-400 I told him. He asked me why so expensive -- they're not stripping it all the way back and repainting it, are they? I said yeah -- what's wrong with that? He told me `oh well if I'm paying for it they won't be doing that -- some bog and touch-up paint is all that's needed I'm sure'. Arsefucker. Not overjoyed with that offer, to be honest.

  7. #7
    Join Date
    18th May 2005 - 09:30
    Bike
    '08 DR650
    Location
    Methven
    Posts
    5,255
    if he gets pissy just insurance it, else why bother with insurance?


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •