Page 1 of 2 12 LastLast
Results 1 to 15 of 24

Thread: KB stickers

  1. #1
    Join Date
    21st October 2002 - 11:00
    Bike
    CharlesidealOB
    Location
    Auckland
    Posts
    1,948
    Blog Entries
    10

    KB Stickers

    Sent out the following email to many Auckland printers.

    I am looking into having some stickers made for my Kiwi Biker web site. I have attached an image of what I want the sticker to look like.

    The attributes of the sticker is as follows:

    • The sticker would be slightly larger than the pre-cut removable part.
    • The removable sticker will have rounded corners like the attached image.
    • The removable sticker will have a width of 100mm.
    • Since they are going to be stuck on bikes & helmets, must be waterproof.

    What is the minimum number that can be ordered and what is the cost. Also does the cost change the more I order?


    and have received the following quotes.

  2. #2
    Join Date
    21st October 2002 - 11:00
    Bike
    CharlesidealOB
    Location
    Auckland
    Posts
    1,948
    Blog Entries
    10

    Ultra Print

    Job Kiwi Biker stickers printed 2 colours (yellow and black ) die cut with rounded corners and a 10mm peel strip all around label.
    Material White S/A Vinyl Removable Finished Size 100 x 100
    Quantites 500 1000 2500 5,000
    Production $852.92 $909.17 $1,169.93 $1,547.80
    Plates $100.00 $100.00 $100.00 $100.00
    Film $126.50 $126.50 $126.50 $126.50
    Proof $35.00 $35.00 $35.00 $35.00
    KNIFE
    Knife is an estimate only
    $250.00 $250.00 $250.00 $250.00
    TOTAL $1,364.42 $1,420.67 $1,681.43 $2,059.30

  3. #3
    Join Date
    21st October 2002 - 11:00
    Bike
    CharlesidealOB
    Location
    Auckland
    Posts
    1,948
    Blog Entries
    10

    Capital Press

    Printed 2 colours
    Stock: 'Special' cast vinyl. (this stock is created for moulding to rounded surfaces such as helmets, etc. Care must be taken when applying.)
    Top cut with rounded corners
    Plate estimate from disc supplied to our specs.

     

    Qty: 200 400 600 800
    Plates: $208.00 $208.00 $208.00 $208.00
    Printing: $461.00 $563.00 $674.00 $778.00
    Total (plus gst) $669.00 $771.00 $882.00 $986.00

  4. #4
    Join Date
    21st October 2002 - 11:00
    Bike
    CharlesidealOB
    Location
    Auckland
    Posts
    1,948
    Blog Entries
    10

    INKSPOT PRINT


    We have an economical digital vinyl label option for very short quantities.
    There are however some limitations - no diecut, no radius corners.

    colour _100mm square. on long life pvc vinyl.
    100 x labels = $ 230.00 +gst _________$2.30 each
    200 x labels = $ 380.00 + gst ________$1.90 each

    sample available on request.

  5. #5
    Join Date
    21st October 2002 - 11:00
    Bike
    CharlesidealOB
    Location
    Auckland
    Posts
    1,948
    Blog Entries
    10

    Artrite Print


    Description: Self adhesive labels.
    Size: 100mm x80mm
    Quantity: a) 250     b) 500    c) 1,000
    Colours: 2 colours 1 side
    Stock: White pvc  s/adhesive long life.
    Finishing: kiss cut to shape.
    Printing: a) $398.00    b) $496.00    c) $692.00
    Art/film: $270.00
    Plates: N/A
    Die: $130.00

    These Prices exclude G.S.T.


  6. #6
    Join Date
    17th June 2003 - 17:34
    Bike
    HMX 5000
    Location
    Browns Bay, Orc-land
    Posts
    186
    bugger.
    going by the last quote: to make it worthwhile and cost effective you would need to order atleast 500, at a cost of about $1.50 each, and have the dosh in first from all interested.

    so it probably won't happen?

    maybe we can buy our own waterproof sticker paper and put it through a PC printer...

  7. #7
    Join Date
    21st October 2002 - 11:00
    Bike
    CharlesidealOB
    Location
    Auckland
    Posts
    1,948
    Blog Entries
    10
    I printed off my own stickers at home, but the ink runs when it gets wet.

  8. #8
    Join Date
    6th May 2003 - 12:00
    Bike
    2020 Honda Rebel 500
    Location
    Northland
    Posts
    960
    Yeah looks like a ghetto approach will be in order....
    /end communication

  9. #9
    Join Date
    5th November 2002 - 11:20
    Bike
    GSXR750 K4
    Location
    South Auckland
    Posts
    2,135
    maybe we just get some XXXXL tshirts printed and wear them over our riding gear?

     

  10. #10
    Join Date
    30th May 2003 - 21:22
    Bike
    Walking
    Location
    New Plymouth
    Posts
    1,719
    Originally posted by Duke of Rogan
    maybe we can buy our own waterproof sticker paper and put it through a PC printer...
    Thanks for checking Spank.
    I have made signs with my printer then had them laminated to make them waterproof. Would laminating be of any help in this sticker project?

    Thou I wouldn't mind paying $2.30 each + GST for a few Re: Inkspot quote.


    "There are however some limitations - no diecut, no radius corners. "

    Is that Bad???

  11. #11
    Join Date
    29th November 2002 - 14:00
    Bike
    2000 Suzuki TL1000R
    Location
    Auckland
    Posts
    159
    Can the group that are doing the T's not use the same plate for the stickers? .

    would buy a few of inkspot stickers.
    for no one on this earth can you trust,
    not men, not women, not beasts,

    *lifts sword*, this you can trust
    Conan the Barbarian

  12. #12
    Join Date
    21st October 2002 - 11:00
    Bike
    CharlesidealOB
    Location
    Auckland
    Posts
    1,948
    Blog Entries
    10
    No, shirts are printed from a screen which is material stretched between a square wooden frame.

  13. #13
    Join Date
    21st October 2002 - 11:00
    Bike
    CharlesidealOB
    Location
    Auckland
    Posts
    1,948
    Blog Entries
    10
    Originally posted by Racey Rider
    "There are however some limitations - no diecut, no radius corners. "

    Is that Bad???
    diecut - Where the removable part of the sticker is cut smaller than the full sticker size. Makes it easy to remove.

    radius - The corners of the removable sticker has rounded corners to match the logo.

  14. #14
    Join Date
    21st October 2002 - 11:00
    Bike
    CharlesidealOB
    Location
    Auckland
    Posts
    1,948
    Blog Entries
    10

    DSP Group


    Description: Kiwibiker Vinyl Sticker - 2C
    Artwork: Film supplied to DSP Specifications or extra (4up on 233x250mm Press sheet)
    Printing: Screen print 2 colours 1 side on white self adhesive vinyl.
    Finishing: Diecut with rounded corners using new knife, pack & deliver to one Auckland address.

    **Supplied as 4up sheets**

    Quantity: 100 200 500
    Price: $761.00 $780.00 $815.00
    • Please note that author’s corrections may result in additional charges to the above estimates.
    • The estimate includes delivery to one Auckland address.
    • The estimate is valid for 90 days from the above date.
    • All prices are exclusive of G.S.T.
       

  15. #15
    Join Date
    21st October 2002 - 11:00
    Bike
    CharlesidealOB
    Location
    Auckland
    Posts
    1,948
    Blog Entries
    10

    DPOD


    Description:
    Kiwibiker Sticker. Size : 100x80mm. Printed 4 colour process 1 side onto Vinyl Self Adhesive stock. Diecut (NEW cutting forme required) and Pack.

    QUANTITY: 50 100 250 500
    PRICE: $293.00 $310.00 $357.00 $440.00

    All prices are subject to freight and GST

    Colour Proofs additional $10 + GST per A3 page (1−3 pages), additional pages POA


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •