nothing to do with uneven clickers so don't worry about that.
OK so what is the real issue? When you spin the wheel it has a buckle?
Ok lets start from scratch.
Loosen the lower triple clamp & the axle clamps. Bounce the bike up & down a bit, tighten the clamps, this should make sure the front is straight if forks aren't bent which isn't likely or you'd remember doing it.
ok Block the front up & spin the wheel. Leave calliper off for now. With a marker taped to the fork you should be able to measure the deflection of the disc & of the wheel. Check spokes for tension, minor buckle can be tensioned out. Disc may not be so easy.
??
Don't you look at my accountant.
He's the only one I've got.
Bookmarks