For Sale: RG150 race bike

**Ivan** · 31st March 2008, 20:46

Hey We are selling our RG150 it comes in race trim
Streetstock. No there are no number plates for this bike

Comes with lots of spares including a spare engine we brought as spares which had a top end failure
But cases are fine as well as clutch also have many spares including front and rear sprockets and gaskets for these bikes. Everything is there to build a good bottom end ready to go bard a crank.

Photos will come on tommorow and I will make a detailed list of spares

Asking price 1750 or near offer.

Cheers

**Ivan** · 1st April 2008, 11:12

2x Used Pistons with rings bearings gudgeons and circlips
1x Set of Brand New Rings
Used Clutch fibres and steels
7x Base Gaskets
3x Flywheel cover gaskets
3x Crankcase gaskets
1x Reed Cage Gasket
4x Internal varying gearbox sprockets
3x Gear Selector Forks
2x Exhaust port seals the ones which go between port and chamber
2x Used Bearings
Various engine seals
3x Head Gaskets
3x Front Sprockets varying sizes
1x Rear Sprocket
2x Vesrah Sintered brake pads.
Also a Box with a gear box a coil some spark plugs and various bits and bobs.

I still also have more parts to upload later once I have sorted through them

The price sounds high but for what you get its really quite cheap but like I said if you dont like the price make an offer close to it

And Please no stupid comments like ill give you a doller im not interested Im tryna make a sale so I can buy my new race bike for this season

**Buddha#81:Me** · 1st April 2008, 11:46

Photo's of the bike?

**quallman1234** · 1st April 2008, 12:53

Will you sell some parts serpate? e.g a head gasket.

**Ivan** · 1st April 2008, 13:30

Yip Heres some more photos.
The bike has its fairings off at the momment as being a race bike it has been dropped and there was a crack in the fairing as pictured it has now been repaired but I have to wait till dad says its ok to put back together,

Sorry Kyle I will not sell parts seperatly as I have Said I need the whole bike to be sold and everything at once to make way for my new race bike.
I will not sell anything seperatly as It is a sale for all the parts

Also here is some more parts

1x Ignition Barrel
1x Seat Lock and and key Barrel
1x Spare Barrel of other bike it has a split in bottom of Cylinder Lining you could get it re sleeved or even you could sleeve this engine down and make a awsome bucket engine.
1x Top Triple Clamp
1x Right Engine Crank Case
1x CLutch Cover
1x Left engine Crank Case
1x Magneto/Flywheel Case
1x GearBox Complete
1x Crank
1x Clutch including Basket Fibres Steel's Basket is in Good Condition and basket Fingers have no grooving

Basically its a second engine there in full pieces I cant say there is 100% a full engine there but from what I have seen there isI cant say every small piece is included as I havent gone through a parts manual checking off every peice I see.

Also On the bike The front forks had an oil change and had 15w oil in to ry and stiffen up suspension a bit so that it wouldnt be so bouncy like most RG's are it helped a bit and has only been riden on once since this was done.

This bike is a front running Bike as Glen on here known as Sketchy_Racer raced it a couple of seasons ago and he was getting seconds on it to a CBR250 and then we lent it to another guy at the end of last winter series and he got a 3rd on it at Taupo

**quallman1234** · 1st April 2008, 23:38

Gah i have the urge to put that second engine together.

Pretty decent deal people! Surely someone wants a streetstock bike with full parts backup!

**Ivan** · 2nd April 2008, 10:39

Exactly What I thought.
And the thing is I am open to dropping the price on the right offer for it.
I will drop the price if need be

**F5 Dave** · 2nd April 2008, 11:02

Originally Posted by Ivan

4x Internal varying gearbox sprockets
. . . .

They are called gears Ivan

. Perhaps you should go to one of these courses run by a polytech so you can become more familiar with the various parts of a motorcycle?

- but I'm not exactly sure if they are variable, standard practise is that they have a set number of teeth.

Originally Posted by Ivan

. . . .
And Please no stupid comments like ill give you a doller im not interested Im tryna make a sale so I can buy my new race bike for this season

What's a doller?

**Ivan** · 2nd April 2008, 11:06

Originally Posted by F5 Dave

They are called gears Ivan

. Perhaps you should go to one of these courses run by a polytech so you can become more familiar with the various parts of a motorcycle?

- but I'm not exactly sure if they are variable, standard practise is that they have a set number of teeth.

What's a doller?

What was ment is that there are gears of differnt sizes varying meaning that they vary in size for differnt gearing.

Come on Dave you know you want to buy it and make a fast bucket out if it

**F5 Dave** · 2nd April 2008, 11:21

Too heavy.

and the word is various.

Try cut & pasting your posts into word & it will pick up at least 1/2 your mistakes. Firefox has a good spell checker too.

**Ivan** · 2nd April 2008, 12:18

Bump does anyone at all want this bike.

I mean serious if you wanna go street stock racing which I have read a lot of people do this bike is good for its pre set up for street stock and is known to be a front runner. Its got good tires on it, And its reliable as.

But for 1750 its not just anRG theres 2 spare used pistons. and new rings and had gasket and base gaskets, If you were dead keen you could throw new rings in and head gasket and base gasket before season and have a nice bike.
But you could also sell the parts seperatly after sale as I know there is intrest by people wanting parts individually.

Sadly this was my first big race bike so it is sad to see it go but Im needing it to to make way and help pay for my SV650 Pro Twin bike