Well here we go : 2-minute 2 colour paint job! Woohoo!

[Ragingrob]

Well, they're not the fancy decal ones but I've got a few of those small 'HONDA' ones that will fit on your screen and the tail end.

Also got a few small 'HRC' ones, and ah the 'REPSOL Honda'. They're really only good for the screen or the front fender as something extra. They're not decals so it won't sex up your bike.

I reckon you should slap on two Honda wing decals on the tank. Saw some on Trade-Me for about $15 bucks for a pair or ebay it, it shouldn't be more than US $20.00 for some top quality ones.

Oh true cool man, yeah gonna wait and get this nice new screen from Ebay should be on its way and then I can try make my bike a bit prettier! Maybe even some new non-cracked mirrors etc.

[motorbyclist]

oh shit i just remembered i may still have the full vinyl sticker kits for two racebike fireblades (cbr-rr) lying around. i used to be a signwriter, and that was one reject that wasn't going in the bin! i don't think all of it is machine cut as it was rejected when the cut got out of alignment with the print by up to a mm. also, no application tape and the vinyl will have shrunk a bit but that isn't an issue....

all the shoei, michelin, castrol etc sponsor stickers, plus a few "cbr", "rr", "fireblade" and honda logos

[Ragingrob]

oh shit i just remembered i may still have the full vinyl sticker kits for two racebike fireblades (cbr-rr) lying around. i used to be a signwriter, and that was one reject that wasn't going in the bin! i don't think all of it is machine cut as it was rejected when the cut got out of alignment with the print by up to a mm. also, no application tape and the vinyl will have shrunk a bit but that isn't an issue....

all the shoei, michelin, castrol etc sponsor stickers, plus a few "cbr", "rr", "fireblade" and honda logos

Really?? We may have to talk! I think I will do some light sanding and more clear coats over next week, but then stickers would really class it up!

[motorbyclist]

looks like someone finally decided to start importing and re-selling those cheap chinese fairings off ebay onto trademe

[Squiggles]

They're just the middle man, see the shipping

Shipping:
$266.00 EMS International

[motorbyclist]

oh shit i just remembered i may still have the full vinyl sticker kits for two racebike fireblades (cbr-rr) lying around. i used to be a signwriter, and that was one reject that wasn't going in the bin! i don't think all of it is machine cut as it was rejected when the cut got out of alignment with the print by up to a mm. also, no application tape and the vinyl will have shrunk a bit but that isn't an issue....

all the shoei, michelin, castrol etc sponsor stickers, plus a few "cbr", "rr", "fireblade" and honda logos

Really?? We may have to talk! I think I will do some light sanding and more clear coats over next week, but then stickers would really class it up!

found them

enough for two bikes, note the stuff cut out of white, "fireblade", "HRC" and michelin men stickers are the only ones to be cut by machine before the job was pulled, the rest you'll have to do with a steel rule and sharp blade (modelling knife/stanley blade/scalpel with fresh blade)

also, one of the michelin men are missing - vinyl has shrunk a bit but that's not a major issue - looks to not be laminated with a protective coat to prevent fade from UV rays, but will still last a fair while

not bad for a freebie

[klyong82]

ohhh i would so like a pair of HRC and alpinestar stickers.....

[motorbyclist]

well there's more than enough there to go around

maybe i'll bring it all round to the next fix it night?

rob you'll need some app tape, or simply buy some extra wide masking tape (about 2" or 50mm wide or wider)

[Ragingrob]

Awesome Andrew, I'll grab some tape this week and then catch up at Strata or something!

[Hanne]

Stickers are awesome. I am tempted to put some really girly pearl white unicorns on madison, but then I think she would NEVER resell...

[homer]

like to see some more pics
maybe with the tint screen on it
i see a couple sugesstions about stickers , another great idea ,
hows about a bit of pin strip ?
not to much it can make things look tacky

maybe a bit of a gold 3mm wide
just a thought

[homer]

found them

enough for two bikes, note the stuff cut out of white, "fireblade", "HRC" and michelin men stickers are the only ones to be cut by machine before the job was pulled, the rest you'll have to do with a steel rule and sharp blade (modelling knife/stanley blade/scalpel with fresh blade)

also, one of the michelin men are missing - vinyl has shrunk a bit but that's not a major issue - looks to not be laminated with a protective coat to prevent fade from UV rays, but will still last a fair while

not bad for a freebie

your not selling the couple of larger castrol stickers are ya
or the couple of the smaller ones
pm me if ya are
want them on the swing arm each side
or are they to big

[motorbyclist]

like to see some more pics
maybe with the tint screen on it
i see a couple sugesstions about stickers , another great idea ,
hows about a bit of pin strip ?
not to much it can make things look tacky

maybe a bit of a gold 3mm wide
just a thought

i have a bit of that in the shed too for the viffer from the first time i painted it right after i bought it

your not selling the couple of larger castrol stickers are ya
or the couple of the smaller ones
pm me if ya are
want them on the swing arm each side
or are they to big

as i said, they need to be cut by hand... can you make it this friday arvo to our friday arvo beer/bike maintenance/mod night? (in epsom)

wasn't planning on selling them, beers always suffice