Results 1 to 4 of 4

Thread: Rejetting and service in Wellington?

  1. #1
    Join Date
    28th December 2006 - 15:55
    Bike
    CBR600RR, WR250 smoker
    Location
    wellington
    Posts
    775

    Rejetting and service in Wellington?

    hi guys
    the mighty hyo is due for its 8000km service and as i have a screaming demon exhaust id like to get it rejetted at the same time.
    can anyone tell me whats involved in this? is it just a case of chucking the new ones in and playing around with an oxy sensor or is there more to it?
    any opinion on where is the best place in wellington to get it done would also be cool.
    thanks

  2. #2
    Join Date
    21st August 2006 - 18:46
    Bike
    MV Agusta Brutale 1090R 2015
    Location
    Auckland, New Zealand, Ne
    Posts
    373
    Quote Originally Posted by 325rocket View Post
    hi guys
    the mighty hyo is due for its 8000km service and as i have a screaming demon exhaust id like to get it rejetted at the same time.
    can anyone tell me whats involved in this? is it just a case of chucking the new ones in and playing around with an oxy sensor or is there more to it?
    any opinion on where is the best place in wellington to get it done would also be cool.
    thanks
    Just the exhaust?
    I've got an SD exhaust too and I asked my local shop about rejetting it at my 8,000K service.
    They were going to look at the jet position, but to rejet fully they needed to order parts in advance (and they don't have anything official they can buy)

    In the end thet said that everything had checked out ok as it was.

    General consensus seems the same...rejet only once you've done both the exhaust and air filter.

  3. #3
    Join Date
    28th December 2006 - 15:55
    Bike
    CBR600RR, WR250 smoker
    Location
    wellington
    Posts
    775
    yeah sorry, i will be doing the air filter at the same time

  4. #4
    Join Date
    14th September 2007 - 16:34
    Bike
    '18 DRZ400SM
    Location
    Wellington
    Posts
    2,116
    I had mine done about a month ago, the standard jets are fine, they just need to move the needle in them down a few notches to let in more fuel.

    Cost me about $450 including the air box, filter and my 8K service.

    I would guess that TSS would be a good place to start with, thats where I had all my servicing done in Welly, plus the mechanic there is an awesome dude.
    "It would be spiteful, to put jellyfish in a trifle."
    \m/ o.o \m/

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •