Bucket bits 4 sale

**John_H** · 24th March 2013, 20:05

Originally Posted by chrisc

I was frustrated with trying to find a muffler to fit under my FXR that had some volume to it. I ended up finding and buying a pair of stainless mufflers from a 2008 Triumph Street Triple. They'd only had about 1000kms done on them and the one I have on my FXR sounds quite nice

I purchased the pair for $160 so I would like to recover half of that, ie $80.
See photos below, pick up is North Shore, Auckland. I can post but I'm pretty busy so I hope you don't need it instantly.

Length approx 340mm, width approx 140mm

Have you fitted yours? How loud is it?

**chrisc** · 24th March 2013, 20:16

Originally Posted by John_H

Have you fitted yours? How loud is it?

Muffler sold pending payment/delivery

Very acceptable (read: a shit load quieter than it was before). I don't have a meter but I would expect it to pass a test (knock on wood!).

Maybe Brian or Henk could pipe in here and comment as they were at Te Puke for its first run with the new muffler. The tune was way out and was running like a dog but that's not the mufflers fault.

**goivy26** · 24th March 2013, 23:12

Hi folks,

I have an unfinished fxr 150 for sale. It's a unfinished build with 17inch Bandit wheels, alloy sproket and all the parts to get it sorted and racing.

Comes with new 1mm Oversized Piston Kit and new forks seals (not fitted).

Engine runs well.

$1000 ono

PM or phone me for photos etc.

Thanks

Ivan

**goivy26** · 24th March 2013, 23:22

Sorry, left my ph number off , 02102586178

Ivan

**Geriatric** · 26th March 2013, 15:11

Hi,

This is my old steel GSXR frame which my nephew stuck a Lifan 150 in. He is now working overseas so it has to go.

The Lifan is slow (maybe 12 HP?) but has only had about 6 outings since new and would make a good starter bike
It has Dunlop slicks which have a lot of life on them and the bike handles very well.
Braided brake line and nyloned. The tank has the bottom cut out with a plastic 3.5L tank fitted.
Doesn't look good, been left out in the weather and has a bit of surface rust, so TLC will may be in order.
Want $400 for it.
Call Adrian 021 227 8047

**koba** · 26th March 2013, 19:17

Originally Posted by goivy26

I have an unfinished fxr 150 for sale.

You giving up on Buckets, or just selling for now?

**goivy26** · 26th March 2013, 19:32

Originally Posted by koba

You giving up on Buckets, or just selling for now?

Just about to have my second full hip replacement, had my 1st one when I was 36! and 4 years later need the other side done so have to consider the long term. Reckon I'll be back soon though

**koba** · 26th March 2013, 19:39

Originally Posted by goivy26

Just about to have my second full hip replacement, had my 1st one when I was 36! and 4 years later need the other side done so have to consider the long term. Reckon I'll be back soon though

Damn!

That sounds really hurty.
Still, I hear they are well worth the short term pain.

good luck with it Man, hopefully we will see you back sometime soon, looks like you were just getting started!

**Geriatric** · 28th March 2013, 06:35

Originally Posted by Geriatric

Hi,

This is my old steel GSXR frame which my nephew stuck a Lifan 150 in. He is now working overseas so it has to go.

The Lifan is slow (maybe 12 HP?) but has only had about 6 outings since new and would make a good starter bike
It has Dunlop slicks which have a lot of life on them and the bike handles very well.
Braided brake line and nyloned. The tank has the bottom cut out with a plastic 3.5L tank fitted.
Doesn't look good, been left out in the weather and has a bit of surface rust, so TLC will may be in order.
Want $400 for it.
Call Adrian 021 227 8047

This has been sold thanks. Another new bucketeer in Wellington

**quallman1234** · 5th April 2013, 13:57

Anyone keen on hyosung250R engine? Possible get rid of a cylinder + big bore? 4 Valve head etc. Turns over fine, Haven't tried to run it.
Got one in my shed, might use it might not, was thinking a go-kart. If anyone's keen i'll sell. 250$
Headers/electrics come with

**Drew** · 5th April 2013, 18:15

Originally Posted by quallman1234

Anyone keen on hyosung250R engine? Possible get rid of a cylinder + big bore? 4 Valve head etc. Turns over fine, Haven't tried to run it.
Got one in my shed, might use it might not, was thinking a go-kart. If anyone's keen i'll sell. 250$
Headers/electrics come with

That's a fuckin heavy lump to use as a bucket motor bro. Custom crank would sort it if someone was inclined to make it...Sketchy?

**Henk** · 5th April 2013, 18:35

Originally Posted by quallman1234

Anyone keen on hyosung250R engine? Possible get rid of a cylinder + big bore? 4 Valve head etc. Turns over fine, Haven't tried to run it.
Got one in my shed, might use it might not, was thinking a go-kart. If anyone's keen i'll sell. 250$
Headers/electrics come with

Probably better off trying to sell it to one of the hyo cup guys up here. I know I blew one up and paid $450 exchange for another engine.

**quallman1234** · 6th April 2013, 16:56

Originally Posted by Henk

Probably better off trying to sell it to one of the hyo cup guys up here. I know I blew one up and paid $450 exchange for another engine.

Yeap, not really trying to sell it particularly hard. Might use it in a go-kart yet. I'll offer it to those guys though, cheers.

Its actually not that heavy. Maybe 30kg. Get rid of a head/cylinder/rod (but they have a pressed pin which is ass) and it wouldn't be too bad. Could get it under a 100 total.
Def wouldn't be built to win. More to get someone on it and be different.