Bucket bits 4 sale

[Drew]

Well Drew; I'm happy to put my money where my mouth is (otherwise I would not have posted in the first place) Pm me your details and I'll send you one. If it works $80 plus shipping. If not send it back (call it square) and I'll stop offering them up.

Brent.

And that folks, is why I'll buy things off this rooster in the future. I wont waste your time on the master cylinder yet though mate, priorities have the RF mods low on the to do list.

[Kendog]

---

FXR front ends, gathered you might have a spare.

Ahh I see.
We don't have a spare set, the second set is on Trudi's bike.

[Ivan]

I have 2 things firstly set of forks USD as seen on my bucket thread shortened to RS125 Honda specs but need working with to get right dont wanna waste my time as I have better forks will trade them for a brake calliper?? or a rear shock out of say FXR150 etc if you have changed your one

also I havea rear shock out of chinese motox bike fully adjustable Compression and Rebound and preload adjustment will need re gasing dont know how good it works as I have never used it but reseviour hits my swing arm but I dont want to modify my frame to make it fit will trade for another shock FXR etc

[hal20308]

Crazyman and myself have been working with a few overseas suppliers for bits and pieces (consumables) for the CrazyFrames..

Clip-ons
IManaged to find a supplier for 33mm clip-ons (suitable for FXRs); we've been using the 45mm version. very nice light bars (~ same weight as the WoodCrafts).

Attachment 258880

CNC 6000 series; they will work out at $125 set (plus shipping in NZ max $15). cheaper than Ebay/Trademe..
($150 for 50mm version; other sizes available if pre-ordered soon).
Before we rush off and bulk order, I'd be keen to get an idea of interest before we commit $$.


Front master-cylinders
Another thing we have had some success with
($80 with the current exchange rate)
Attachment 258881
(hoping Rich/Clive/Andrew might provide some feedback here..)

Thanks Drew: three options from what I recall (I'll get the list of specs soon): 12.7mm, 14mm, 16mm

We have been using the 12.7mm version but sizes range up to 19.5mm

I'll bring a few bits along to the GP for people to look/touch/replace broken bits etc.

I'll take a 12.7mm M/C when you get some in........ at Kaitoke most meets or else can intraweb the $$$ - cheers.

[quallman1234]

I have 2 things firstly set of forks USD as seen on my bucket thread shortened to RS125 Honda specs but need working with to get right dont wanna waste my time as I have better forks will trade them for a brake calliper?? or a rear shock out of say FXR150 etc if you have changed your one

also I havea rear shock out of chinese motox bike fully adjustable Compression and Rebound and preload adjustment will need re gasing dont know how good it works as I have never used it but reseviour hits my swing arm but I dont want to modify my frame to make it fit will trade for another shock FXR etc

I have a brembo single oppisoing caliper which will fit those RS forks i gave you. you can have it. Has even got new helicoiled mounting threads

[speights_bud]

I have a brembo single oppisoing caliper which will fit those RS forks i gave you. you can have it. Has even got new helicoiled mounting threads

Choo got any slicks lying around?

[RDjase]

Choo got any slicks lying around?

Heres some

http://www.trademe.co.nz/Browse/List...x?id=452116063

[husaberg]

I have a brembo single oppisoing caliper which will fit those RS forks i gave you. you can have it. Has even got new helicoiled mounting threads

Is this an RS125 parts give away? because i will up my hand up? or is that out?

Seriously though if have you got anything for sale PM me.

[speights_bud]

I was tempted by the slicks, thinking ohh its only for buckets.... but then i read stored for 4 years and who knows how old before then?...

[cheesemethod]

Just picked up a MB100. Don't want to get too crazy with it yet, but does anybody know of a front end arrangement to put a better brake on it?

[koba]

Just picked up a MB100. Don't want to get too crazy with it yet, but does anybody know of a front end arrangement to put a better brake on it?

Disc or drum?
I't its a disc it should be OK if it's in working order.

EDIT: Lots of front ends can be made to fit.

[husaberg]

Just picked up a MB100. Don't want to get too crazy with it yet, but does anybody know of a front end arrangement to put a better brake on it?

You will note your specific bike is not listed but it is the std small Honda size bearing.

Disc or drum?
I't its a disc it should be OK if it's in working order.

EDIT: Lots of front ends can be made to fit.

Have a look in here half the fun is in the fitting.

The two PDF are a usefull guide to which bike has what bearing and which bike has what fork Diameter. It is quite useful for sizing up options.

[Ivan]

I have a brembo single oppisoing caliper which will fit those RS forks i gave you. you can have it. Has even got new helicoiled mounting threads

sweet man sounds good you dont have the old disk still do you or know whaqt other models bolt onto that rim until i upgrade to a 17 inch front

[husaberg]

sweet man sounds good you dont have the old disk still do you or know whaqt other models bolt onto that rim until i upgrade to a 17 inch front

er stuff like this is everywhere

I see metal gear has update its website it now has a search by size or stud spacing PCD etc function. So is perfect for cross referencing.
http://metalgear.com.au/search_by_di...nts=Find+Discs

This is the one i have generally used in the past.
http://www.moto-master.com/productnow.php#

[Ivan]

er stuff like this is everywhere

this is aprilia rs50 to by the way not honda rs125