Bucket bits 4 sale

**SHELRACING** · 14th March 2012, 11:18

http://www.trademe.co.nz/motors/moto...-455989034.htm

Here ya go I can think of a few jaffas that might need these,

**crazy man** · 17th March 2012, 19:05

Originally Posted by Bert

Crazyman and myself have been working with a few overseas suppliers for bits and pieces (consumables) for the CrazyFrames..

Clip-ons
IManaged to find a supplier for 33mm clip-ons (suitable for FXRs); we've been using the 45mm version. very nice light bars (~ same weight as the WoodCrafts).

Attachment 258880

CNC 6000 series; they will work out at $125 set (plus shipping in NZ max $15). cheaper than Ebay/Trademe..
($150 for 50mm version; other sizes available if pre-ordered soon).
Before we rush off and bulk order, I'd be keen to get an idea of interest before we commit $$.

Front master-cylinders
Another thing we have had some success with
($80 with the current exchange rate)
Attachment 258881
(hoping Rich/Clive/Andrew might provide some feedback here..)

Thanks Drew: three options from what I recall (I'll get the list of specs soon): 12.7mm, 14mm, 16mm

We have been using the 12.7mm version but sizes range up to 19.5mm

I'll bring a few bits along to the GP for people to look/touch/replace broken bits etc.

for anyone that are wanting clipons they will be at the gp next week

**Eddieb** · 18th March 2012, 18:36

My neighbour is going to be selling a CBR150 shortly, complete running bike but a little scruffy. Most fairing panels have minor damage, needs a chain and sprockets and one clipon is a little bent I think. No WOF or rego and may require a headlight, or at least a headlight bulb I'm not sure which. It runs sweet though. It's a 2004 I think.

Realisticly what sort of money could he get for it if he advertised it as a bucket? he needs to clear as much as he can to get into a commuter bike like a XT 225 Scorpio or simliar so isn't going to let it go for a silly low ball offer, but it does need to go to fund the new commuter.

?

**Clivoris** · 18th March 2012, 20:36

Originally Posted by Eddieb

My neighbour is going to be selling a CBR150 shortly, complete running bike but a little scruffy. Most fairing panels have minor damage, needs a chain and sprockets and one clipon is a little bent I think. No WOF or rego and may require a headlight, or at least a headlight bulb I'm not sure which. It runs sweet though. It's a 2004 I think.

Realisticly what sort of money could he get for it if he advertised it as a bucket? he needs to clear as much as he can to get into a commuter bike like a XT 225 Scorpio or simliar so isn't going to let it go for a silly low ball offer, but it does need to go to fund the new commuter.

?

If he would prefer to replace the fairings and headlight instead of selling the bike, put him in touch with me. I have a set of mint fairings, headlights, indicators etc.. I'm always keen to buy another one though if he is keen to sell it. Clive 027 6647254.

**wildman** · 18th March 2012, 22:59

Need to make room for new sidecar so selling yellow terror sidecar. Powered by standard Loncin 150 motor, go-kart rims and tyres, 35mm hollow axle, mikuni superkart vaccum fuel pump and go-kart quick change rear sprocket. Plenty of room for developement [spend more money] best way to scare your mates while having fun. I want to see the class taking off so price isonly $500 including spares, if you're interested send me a pm.

**SHELRACING** · 19th March 2012, 15:06

Originally Posted by wildman

Need to make room for new sidecar so selling yellow terror sidecar. Powered by standard Loncin 150 motor, go-kart rims and tyres, 35mm hollow axle, mikuni superkart vaccum fuel pump and go-kart quick change rear sprocket. Plenty of room for developement [spend more money] best way to scare your mates while having fun. I want to see the class taking off so price isonly $500 including spares, if you're interested send me a pm.

I don't think missus wobbler would let me buy it. But I'd be interested in looking at some pics

**kel** · 21st March 2012, 11:29

FXR150 F4 (Bucket racer) race bike for sale
Bike has been dynoed at a fat 20hp (graphs available on the ESE thread)
After market cams and valve springs (only 2 meetings on these), ported head, 64mm piston (5 meetings on this), 28mm Keihin flat slide carb, custom header and muffler (mega phone exhaust also included), 12 tooth front sprocket, new 49 tooth rear sprocket and new chain, GSX250R wheel conversion with slicks, standard wheels with wets (subject to change on wheels with wets as a mate already has his eye on them), after market unbreakable footrest hangers, after market clipon bars, KX125 quick action throttle. Also comes with the following spares: complete gasket set, new fork seals, new 13 tooth front sprocket, 47 and 48 tooth rear sprockets, 6 x main jets, set of fairings with screen and whatever else that pops up that belongs to it.
Bike has been used in the first 2 rounds of the north island series with several wins and top 4 placings (leading the series after 2 rounds). Its clearly quicker than all but the very best buckets, plus there’s still scope for more power which Id be happy to discuss.
I need to sell this or Ill never finish the 2 stroke. Make an offer!

**Gigglebutton** · 21st March 2012, 18:42

Originally Posted by kel

FXR150 F4 (Bucket racer) race bike for sale
Bike has been dynoed at a fat 20hp (graphs available on the ESE thread)
After market cams and valve springs (only 2 meetings on these), ported head, 64mm piston (5 meetings on this), 28mm Keihin flat slide carb, custom header and muffler (mega phone exhaust also included), 12 tooth front sprocket, new 49 tooth rear sprocket and new chain, GSX250R wheel conversion with slicks, standard wheels with wets (subject to change on wheels with wets as a mate already has his eye on them), after market unbreakable footrest hangers, after market clipon bars, KX125 quick action throttle. Also comes with the following spares: complete gasket set, new fork seals, new 13 tooth front sprocket, 6 x main jets, set of fairings with screen and whatever else that pops up that belongs to it.
Bike has been used in the first 2 rounds of the north island series with several wins and top 4 placings (leading the series after 2 rounds). Its clearly quicker than all but the very best buckets, plus there’s still scope for more power which Id be happy to discuss.
I need to sell this or Ill never finish the 2 stroke. Make an offer!

My motor for the wheels

**hillbillie** · 24th March 2012, 08:44

Originally Posted by SHELRACING

http://www.trademe.co.nz/motors/moto...-455989034.htm

Here ya go I can think of a few jaffas that might need these,

Bahahahahaha!

**Buckets4Me** · 24th March 2012, 19:31

Originally Posted by SHELRACING

http://www.trademe.co.nz/motors/moto...-455989034.htm

Here ya go I can think of a few jaffas that might need these,

I think this is more in order (only the 2 stroke boys thow)
http://www.trademe.co.nz/home-living...-460080839.htm

**Captian soup** · 25th March 2012, 20:46

I have 80% of a Suzuki impulse sitting out the back of my place. if anyone is interested in any parts send me a PM.
missing parts:
seat, rear wheel, air box, fairings lights ect, brakes are there but theres something seriously wrong there.. cant think of anything else.

**chrisc** · 27th March 2012, 20:46

I imported them with fingers and toes crossed they will fit but they are on the slightly tight side. Funds are needed at the moment so they have to go rather than getting them altered.
Average condition, definitely been down the payment a few times but still plenty of life left in them for buckets as I was intending.
Shoulder, arm, knee etc armour.

Red and white
Suit someone between 55-65kg, 1.7m tall

Just trying to get what I paid for them so wanting $270. You can come try them on before purchasing. I live on the northern half of the North Shore.

021 157 1036