Yea you maybe right. No idea what it is, or what it is worth, has Googled AMB and come up with one of the expensive road racing jobbies and priced it accordingly.
Who You Calling a Pig
Yea you maybe right. No idea what it is, or what it is worth, has Googled AMB and come up with one of the expensive road racing jobbies and priced it accordingly.
For the record Qkkid was in my bed, not the other way round
Originally Posted by Yow Ling
Unknown Disorder
The in answer question is from me saying it's an MX one and way over priced, hopefully the relist or FPO will be more realistic if no bids come in. Convinced this will be one of the ex Rodney ones, not much call for MX transponder of MX north of the bombards now.
Stock is best
Who You Calling a Pig
Saw she answered. Checked MyLaps and the MX transponder is AU$394 landed (that includes AU$44 shipping). Still not quite the $700 advertised though.
Making James May look quick...
Hi, anybody got a sprocket carrier and rear disk for a RS125 they want to part with? Ta.
Sometimes you wish it was easier, but if it was, everyone else would do it, then you remember you don't want to be like everybody else!
Was worth a crack
Sprocket carrier? Are you after one of those fancy quick change Talon numbers? Standard setup just has 3 x cap screws bolted through the sprocket that push into the cush drive donuts in the rim.
Making James May look quick...
Thanks Kel. Is that really all I need to stick a RS rim into my FXR? Was just looking at a schematic online and thought I'd need a bit more?
Or can I get away with just the cap screws and a spacer? Donuts sorted thanks F5Dave
Cheers.
Sometimes you wish it was easier, but if it was, everyone else would do it, then you remember you don't want to be like everybody else!
Was worth a crack
No.
Send me the RS rims and I'll send you a nice set of Impulse wheels that will drop straight in.
125GP!!!
I should have an original one, which fits the NX4 and 3.5 wide rims. should be able to machine the middle spacer. The only problem is my spares box is in Christchurch.Thanks Kel. Is that really all I need to stick a RS rim into my FXR? Was just looking at a schematic online and thought I'd need a bit more?
Or can I get away with just the cap screws and a spacer? Donuts sorted thanks F5Dave
Cheers.
James jarman can make you taloon copy.
Forum whore
Forum whore
Impulse wheels....................and the bit they bolt onto
http://www.turners.co.nz/Vehicles/Pa...?RefId=1102974
Dale Kerrigan: If there's anything Dad loved more than serenity, it was a big two stroke engine on full throttle!
Forum whore
Who You Calling a Pig
Anyone looking for sidecar parts.
Here is a wheel to start you off http://www.trademe.co.nz/motors/moto...-564293593.htm
Or maybe some 10inch wheels, pretty sure these are the same that is on my frame http://www.trademe.co.nz/motors/moto...-562227305.htm and http://www.trademe.co.nz/motors/moto...-562944235.htm
Was worth a crack
Lasted all of 40 minutes
Long Haired Yobbo
Was that you selling it?
Heinz Varieties
Who You Calling a Pig
Hope you asked permission
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks