Bucket bits 4 sale

[timg]

I grabbed the dr250 carb for my FXR, im planning on buying the copy off metioned website for Cg 125.( building 2 buckets at same time)
Dr250 carb 34mm will this do for my FXR? I was told it the same as a gn250 so im thinking it just needs slightly enlarged hole drilled in bottom of slide like iv read on another post am I correct?

I think you'll find 34mm is too large on the FXR. IIRC the GN250 carb is 30mm? A 28mm PWK/OKO works well on a std engine with exhaust mods and 30mm for a full monty worked worked engine. Cheers.

[husaberg]

Yes it is, sorry I was thinking flange mount instead of spigot

They also come as a 33mm (I think it is)

I'd forgotten just how fucking awesome my GN was until you put that pic up, I must drag it out of the shed and fire it up

Start the fire with the petrol tank Peter Fonda.

[Kickaha]

Start the fire with the petrol tank Peter Fonda.

Buy me a TF125 tank and send it over then

[husaberg]

Buy me a TF125 tank and send it over then

Pretty sure the old Man has an X7 tank.
Drive out to a dairy farm and there will be one or two there anyway.


I think one of those skyteam ace ones would look good too.

Measurements are here
https://www.ooracing.com/store/tank-...ce-50-125.html

[Rick 52]

FXR for sale, body work removed, rough around the edges, engine runs very well, big carb fitted
$1000 pic up Waiwera

[Buttman18]

FXR for sale, body work removed, rough around the edges, engine runs very well, big carb fitted
$1000 pic up Waiwera

im keen for a new bucket have you got pics?

[Rick 52]

im keen for a new bucket have you got pics?

Runs great, front tyre is a BT39 Conti on the rear.

[Gixxer88]

Right, xr200 carb sorted for my cg125 where to start with jetting? And have a gn250 carb for my fxr and again not sure on jetting iv never done it

[Buttman18]

Runs great, front tyre is a BT39 Conti on the rear.

Do you any spares wheels, forks or sprockets etc...

[F5 Dave]

Right, xr200 carb sorted for my cg125 where to start with jetting? And have a gn250 carb for my fxr and again not sure on jetting iv never done it

There is no answer for that question.

Search the web for jetting articles (for non CV carbs).

A 172 on main, NDJK needle and 35 on pilot.




. . . will not be right. Really.

[Yow Ling]

Right, xr200 carb sorted for my cg125 where to start with jetting? And have a gn250 carb for my fxr and again not sure on jetting iv never done it

I think a 125 main will work on the gn carb for a fxr

[Henk]

Do you any spares wheels, forks or sprockets etc...

Pretty sure this is just the bike.
Wheels you will want
Forks rarely get bent
Run 12/47 or 12/49 for mount Wellington and you won't need any spare sprockets.

You will want to track down a second set of wheels for wets at some stage no matter what you buy.

[Buttman18]

Pretty sure this is just the bike.
Wheels you will want
Forks rarely get bent
Run 12/47 or 12/49 for mount Wellington and you won't need any spare sprockets.

You will want to track down a second set of wheels for wets at some stage no matter what you buy.

thanks henk

wanted a spare FXR front to put on my RG50

[Gixxer88]

Thanks Yow Ling a place to start and an explanation on why I . . .will not be right F5 Dave?

[F5 Dave]

Gun carb on fxr pretty common, so on std engine should be close. Move from there and it won't be. CG, well who knows? My guess wasn't a guess. Trial and error.