Page 1 of 2 12 LastLast
Results 1 to 15 of 30

Thread: WTF is a compression screw?

  1. #1
    Join Date
    15th November 2007 - 10:42
    Bike
    1996, Honda Hornet 250
    Location
    Bucklame
    Posts
    78

    WTF is a compression screw?

    After having spend a couple of weekend's trying to get a mates SR250 to idle properly with no luck he took it to a shop mechanic who fixed it by adjusting the "compression screw". What on earth is a compression screw? I have worked on cars and bikes for years now and have never heard of such a thing. The internet is no help either. Does anyone know where this mystical screw is and what it does?

    Thanks to all in advance

    TTTTTTTTTTTTIIIIIIIIIMMMMMMMMMMMMAAAAAAAAAAAAYYYYY YYYYY
    Timmay

    Spark plugs for motorbike $78...Speeding ticket on test ride to prove spark plugs have fixed problem $80...knowing problem is fixed...Priceless

  2. #2
    Join Date
    29th January 2005 - 11:00
    Bike
    2006 Suzuki GSX-R750 K6
    Location
    Te Puke
    Posts
    2,970
    I think someone's pisser may have been pulled here....
    Member, sem fiddy appreciation society


    Quote Originally Posted by PrincessBandit View Post
    I find it ironic that the incredibly rude personal comments about Les were made by someone bearing an astonishing resemblance to a Monica Lewinsky dress accessory.

    Quote Originally Posted by PrincessBandit View Post
    All was good until I realised that having 105kg of man sliding into my rear was a tad uncomfortable after a while

  3. #3
    Join Date
    15th February 2005 - 15:34
    Bike
    Katanasaurus Rex
    Location
    The Gates of Delirium
    Posts
    9,019
    And he probably used a left handed screw driver.

  4. #4
    Join Date
    14th July 2006 - 21:39
    Bike
    2015, Ducati Streetfighter
    Location
    Christchurch
    Posts
    9,081
    Blog Entries
    8
    That's when you are doing the rude stuff with your girl and your flatmate runs into your room and jumps on your back.

    Compression screw.

  5. #5
    Join Date
    13th April 2007 - 18:26
    Bike
    06 scrambler,xrl,
    Location
    In town. Crap
    Posts
    4,155
    Blog Entries
    1
    It's a screw that raises pressure via friction.
    A 14" "populating tool" is the recommended size to adjust it with.........

  6. #6
    Join Date
    10th June 2005 - 19:24
    Bike
    KTM 250exc
    Location
    Napier
    Posts
    1,815
    Quote Originally Posted by Katman View Post
    And he probably used a left handed screw driver.
    You can actually get those....

  7. #7
    Join Date
    3rd June 2008 - 11:58
    Bike
    hondarr
    Location
    portauckland
    Posts
    388
    its not so much of a screw but more of a bung type button
    that sits on the outermost cylnder bore


  8. #8
    Join Date
    21st August 2004 - 12:00
    Bike
    2017 Suzuki Dl1000
    Location
    Picton
    Posts
    5,177
    Quote Originally Posted by Katman View Post
    And he probably used a left handed screw driver.
    Quote Originally Posted by speights_bud View Post
    You can actually get those....
    Specially designed for left hand thread screws.
    Time to ride

  9. #9
    Join Date
    10th June 2005 - 19:24
    Bike
    KTM 250exc
    Location
    Napier
    Posts
    1,815
    Quote Originally Posted by Jantar View Post
    Specially designed for left hand thread screws.
    or for the semi assisted removal of right handed screws....

    Bugger it, i'll just use glass head nails next time...

  10. #10
    Join Date
    3rd October 2004 - 15:45
    Bike
    Africa Twin DCT.
    Location
    Australia 4507
    Posts
    1,450
    Quote Originally Posted by speights_bud View Post
    You can actually get those....
    Very handy when it comes time to change ones blinker fluid or muffler bearings.

  11. #11
    Join Date
    5th April 2004 - 20:04
    Bike
    Exxon Valdez
    Location
    wellington
    Posts
    13,381
    All screws compress something. That said however, methinks the mechanic did something real simple, that took him weeks to find the first time he had the problem, and tried the baffle with bullshit approach when explaining to your friend.

  12. #12
    Join Date
    15th November 2007 - 10:42
    Bike
    1996, Honda Hornet 250
    Location
    Bucklame
    Posts
    78
    so it is a screw/bung at the top of the cylinder bore which raises compression......still not exactly sure how this works.....anybody got a link to a website explaining this, pictures would be useful
    Timmay

    Spark plugs for motorbike $78...Speeding ticket on test ride to prove spark plugs have fixed problem $80...knowing problem is fixed...Priceless

  13. #13
    Join Date
    10th June 2005 - 19:24
    Bike
    KTM 250exc
    Location
    Napier
    Posts
    1,815
    Quote Originally Posted by TLDV8 View Post
    Very handy when it comes time to change ones blinker fluid or muffler bearings.
    Got a digital plumb bob to check that with?

  14. #14
    Join Date
    19th November 2003 - 18:45
    Bike
    KTM 690 DUKE R
    Location
    Auckland - unavoidably...
    Posts
    6,422
    Quote Originally Posted by TLDV8 View Post
    Very handy when it comes time to change ones blinker fluid or muffler bearings.
    The amount of times people have been told to get a bucket of striped paint by their senior rates, or to go get a bucket of steam

  15. #15
    Join Date
    10th June 2005 - 19:24
    Bike
    KTM 250exc
    Location
    Napier
    Posts
    1,815
    Quote Originally Posted by sAsLEX View Post
    The amount of times people have been told to get a bucket of striped paint by their senior rates, or to go get a bucket of steam
    Striped paint ACTUALLY exists. it's not actually 'stripey' more like a base colour with a speckle of secondary colour...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •