Yoshimura EM-pro

[Cajun]

any idea which wire need to disconnect?

i know harness is pretty cheap US$80, but if all it doing is removing a wire,

[mugins]

When it goes in the bike it bring up a Fi code on the dash, and won't fire up.

Have you tired the mode switch to tell what fi code it's putting out?

[Cajun]

When it goes in the bike it bring up a Fi code on the dash, and won't fire up.

Have you tired the mode switch to tell what fi code it's putting out?

Done that throws no code.

[GIXser]

1600 different settings so ray clee told me or thereabouts...

[Ozzy27]

Cajun,
Had a look. On the green connector from the ignition switch you only leave the 2 thick dia wires conected. Remove the small dia wires.
Can't seem to find the cd but have a cable.
Cheers
Chris

[Cajun]

Cheers Ozzy, i will have a play this weekend and see how i get on, with pulling the wire.

Be awsome if i could get the cable, let me know what you want for it.

[Firefight]

any idea which wire need to disconnect?

i know the bike is only a shitty gxxer so who cares pretty cheap US$80,,

Neal,

in the movies when the good guys are disconecting a bomb, they always cut the red wire !!,








or was that the green wire ?





Dave

[Firefight]

sorry it was the blue wire, fuck 2late

[Cajun]

Cajun,
Had a look. On the green connector from the ignition switch you only leave the 2 thick dia wires conected. Remove the small dia wires.
Can't seem to find the cd but have a cable.
Cheers
Chris

Hi Chris

Finally got around to putting this in, was a bit confused since was no green plug, so just starting looking at the plug that came from the ignition switch.

It has 6 wires going in to it, 4 large 2 small.

pulled out the 2 small ones and bike fires up.

Thanks heaps mate, i drop you a line during the week about getting that cable for it.

Thanks

[Cajun]

Anoter update.

pulling out both wires does not work, there is a orange/blue & orange/yellow.

Pulling both means the taillight & interactors wouldn't work, bike fire up

Plug the orange/blue back in, and taillight and interactors work.