Serial & Std approval # on a Shoei XR 1000

**Matt Bleck** · 16th July 2008, 12:50

Can anyone tell where abouts on my helmet I can find these numbers?

**vifferman** · 16th July 2008, 12:57

There's a fabric tag attached to the liner that might be it. But there should have been a whole bunch of paperwork that has the details in the box that it came in. If you don't have it any more, I can look for you when I get home.

**Matt Bleck** · 16th July 2008, 13:05

I didn't get the box etc when i brought it.

There is a sticker on the inside of the chin bar, and there is tag on the strap, both have numbers on?

**bungbung** · 16th July 2008, 13:09

The tag on the strap should have an E Number, something like this: E 6 R22 050064/P-

That is the safety standard approval (EEC). There will be a sticker with a 5 digit number somewhere inside, that is the serial number. Maybe the chin bar. , I don't have mine near by.

**riffer** · 16th July 2008, 13:20

My Multitec has the label on the right hand side strap (the side that doesn't have the D-rings). Hopefully it's standard Shoei practice to put it there.

**Matt Bleck** · 16th July 2008, 13:26

On the strap it has:

050055 - P
E6 (in a circle)
107-1032

?

**bungbung** · 16th July 2008, 13:33

I'm guessing you are applying for a race licence?

The E6 is EEC rules, year 2006. The 050055 - P is likely the manufacturer and model type approval. Use 107-1032 as the serial number.

**Matt Bleck** · 16th July 2008, 13:37

Originally Posted by bungbung

I'm guessing you are applying for a race licence?

The E6 is EEC rules, year 2006. The 050055 - P is likely the manufacturer and model type approval. Use 107-1032 as the serial number.

Got my licence in the mail today....

thanks for the help!

**Kornholio** · 16th July 2008, 13:38

Originally Posted by bungbung

I'm guessing you are applying for a race licence?
.

Weeeeeeeeee Timmay...so am I going to need a new helmet as well

**Matt Bleck** · 16th July 2008, 13:43

Originally Posted by Kornholio

Weeeeeeeeee Timmay...so am I going to need a new helmet as well

Does your old one meet the current MNZ criteria?

**Kornholio** · 16th July 2008, 13:52

Originally Posted by Matt Bleck

Does your old one meet the current MNZ criteria?

Dude I made my one out of paper machet.... So yes maybe??

**Matt Bleck** · 16th July 2008, 13:59

Originally Posted by Kornholio

Dude I made my one out of paper machet.... So yes maybe??

next please......

**scott411** · 16th July 2008, 14:00

Originally Posted by bungbung

I'm guessing you are applying for a race licence?

The E6 is EEC rules, year 2006. The 050055 - P is likely the manufacturer and model type approval. Use 107-1032 as the serial number.

for the CE ratings,
you were close,
the E6 in a circle is the country that the approval was given,
teh 05XXX means is ECE 05 std (2005 which is the latest one, there was 03 and 04 before that)
and the number afterward is the batch number,
the next number is the serial number,

all this info is in teh MNZ rule book