Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: Wheels Buckled

  1. #1
    Join Date
    13th May 2004 - 18:59
    Bike
    WEAPON
    Location
    Westside
    Posts
    2,210

    Wheels Buckled

    Well en route to putting things back together, i whipped the front callipers off and jacked the front up on the race stand, spun the front wheel round and f#$% sure enough it has a slight buckle in it.

    Anyone able to recommend a place to take it to, to get it straightened, preferbly in auckland, but it's something that has to be done, so if it has to go elsewhere to be done.

    Also anyone got anyideas on a rough cost, or would it all be relative to the amount of damage.

    Cheers Guys/Gals

    Bruce
    GSXR wiping the shit that is that Honda, Yamaha and Kawasaki off the road since '85'


    All you Gixxer riders check it out http://www.gixxerplanet.com/home/ind...referrerid=235
    For all your riding saftey gear needs and Remus Mufflers check out www.quasimoto.co.nz
    Anything Suzuki! Rock into Colemans and check it out www.colemans-suzuki.co.nz

  2. #2
    Join Date
    20th November 2002 - 03:11
    Bike
    Registered. For now...
    Location
    Tauranga
    Posts
    1,627
    Ring Wheel & Frame NZ in Cambridge 07-827 6688
    ACC - It's where the Enron accountants all went.

  3. #3
    Join Date
    12th February 2004 - 12:00
    Bike
    08 ZX-6R Race Bike, FXR150
    Location
    Auckland
    Posts
    4,913
    Quote Originally Posted by What?
    Ring Wheel & Frame NZ in Cambridge 07-827 6688
    Was just going to recommend the same place. Milky's Dad has had a few wheels done there... Pretty cheap too...

  4. #4
    Join Date
    13th January 2004 - 11:00
    Bike
    Honda PC800
    Location
    Henderson -auckland
    Posts
    14,163
    Ill third that comment-Um and bruce --Theres a viffer750 wheel here -um maybee ya could send em both at the same time.
    get a bulk discount
    To see a life newly created.To watch it grow and prosper. Isn't that the greatest gift a human being can be given?

  5. #5
    Join Date
    13th May 2004 - 18:59
    Bike
    WEAPON
    Location
    Westside
    Posts
    2,210
    Anyone used or had experience with a frim called Arrow on Patiki Rd, i heard from a good source that they repair wheels? Nice and close to me as well.

    But if not to Wheel & Frame it is.

    And Tony if i do send it down there, i'd be more than happy to send your wheel down too mate, after all I am still in debt to you, paying for the wheel to get fixed though thats a different story.
    GSXR wiping the shit that is that Honda, Yamaha and Kawasaki off the road since '85'


    All you Gixxer riders check it out http://www.gixxerplanet.com/home/ind...referrerid=235
    For all your riding saftey gear needs and Remus Mufflers check out www.quasimoto.co.nz
    Anything Suzuki! Rock into Colemans and check it out www.colemans-suzuki.co.nz

  6. #6
    Join Date
    13th January 2004 - 11:00
    Bike
    Honda PC800
    Location
    Henderson -auckland
    Posts
    14,163
    lol --mate I'd hardley expect ya to pay
    To see a life newly created.To watch it grow and prosper. Isn't that the greatest gift a human being can be given?

  7. #7
    Join Date
    27th July 2004 - 00:36
    Bike
    NC700X XR250 MTS1200
    Location
    Auckland, NZ
    Posts
    3,275
    Blog Entries
    2
    Quote Originally Posted by loosebruce
    Anyone used or had experience with a frim called Arrow on Patiki Rd, i heard from a good source that they repair wheels? Nice and close to me as well.

    But if not to Wheel & Frame it is.

    And Tony if i do send it down there, i'd be more than happy to send your wheel down too mate, after all I am still in debt to you, paying for the wheel to get fixed though thats a different story.
    heard of arrow. they build lots of wheels for cars and fix them too... haven't had work done there, but haven't heard anything bad.

  8. #8
    Join Date
    13th February 2004 - 12:00
    Bike
    ...
    Location
    Auckland
    Posts
    471
    Quote Originally Posted by Two Smoker
    Was just going to recommend the same place. Milky's Dad has had a few wheels done there... Pretty cheap too...
    I was about to dispute that name, as I have always known them as Smythe and Yeates, but on looking at an ad for them, they are one and the same. I *think* that the wheel we most recently had straightened was rather bad, and it was returned to reasonably straight - not perfect, but pretty good - for less than $100. TS might remember the exact price as he took it in to them...

  9. #9
    Join Date
    4th October 2004 - 10:58
    Bike
    91 RGV 250
    Location
    www.farmtalk.co.nz
    Posts
    209
    Shit mate, had just been to cambridge this weekend to see my girlfriends parents, would have been able to take it down for you. sorry about that (makes it worse me saying this now I guess) but i'm going back down in a fortnight but thats too late I guess
    Farmers.... www.farmtalk.co.nz

  10. #10
    Join Date
    23rd January 2005 - 11:00
    Bike
    .
    Location
    .
    Posts
    1,355
    That's what couriers are for....

  11. #11
    Join Date
    12th January 2004 - 12:00
    Bike
    '87 CR500, '10 RM144
    Location
    'Kura, Auckland, Kiwiland
    Posts
    3,728
    Don't use arrow,they can't do any better than me.....
    Drew for Prime Minister!

    www.oldskoolperformance.com

    www.prospeedmc.com for parts ex U.S.A ( He's a Kiwi! )

  12. #12
    Join Date
    4th October 2004 - 10:58
    Bike
    91 RGV 250
    Location
    www.farmtalk.co.nz
    Posts
    209
    Quote Originally Posted by Andyadams
    That's what couriers are for....
    Mate, I was just trying to help him out, he's smashed his bike up so I'm sure he'll want to spend as little as possible on couriers. But that is true I guess
    Farmers.... www.farmtalk.co.nz

  13. #13
    Join Date
    13th May 2004 - 18:59
    Bike
    WEAPON
    Location
    Westside
    Posts
    2,210
    Quote Originally Posted by DEATH_INC.
    Don't use arrow,they can't do any better than me.....
    ture dat, well hows bout you have a look at my hoop first before i send it down to cambridge, well try and get down your way, monday/tuesday. If so you reckon you need the axle as well?
    GSXR wiping the shit that is that Honda, Yamaha and Kawasaki off the road since '85'


    All you Gixxer riders check it out http://www.gixxerplanet.com/home/ind...referrerid=235
    For all your riding saftey gear needs and Remus Mufflers check out www.quasimoto.co.nz
    Anything Suzuki! Rock into Colemans and check it out www.colemans-suzuki.co.nz

  14. #14
    Join Date
    13th May 2004 - 18:59
    Bike
    WEAPON
    Location
    Westside
    Posts
    2,210
    Quote Originally Posted by ktulu
    Mate, I was just trying to help him out, he's smashed his bike up so I'm sure he'll want to spend as little as possible on couriers. But that is true I guess
    Spend as little as possible, fucken aye mate you're not wrong there, plus it's proberly not cheap to courier a wheel either, but thanks for the thought of help, i will try to give you more notice next time i buckle the rim in a crash
    GSXR wiping the shit that is that Honda, Yamaha and Kawasaki off the road since '85'


    All you Gixxer riders check it out http://www.gixxerplanet.com/home/ind...referrerid=235
    For all your riding saftey gear needs and Remus Mufflers check out www.quasimoto.co.nz
    Anything Suzuki! Rock into Colemans and check it out www.colemans-suzuki.co.nz

  15. #15
    Join Date
    25th July 2004 - 12:00
    Bike
    70's Superbikes
    Location
    Naike- Just Doin' It!
    Posts
    1,202
    Aww come on Bruce,
    A buckled front wheel, what does that matter to you?
    I mean, how often is it on the ground anyway
    Blast From The Past Axis of Oil

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •