Anyone know were to get something along these. (the pinky looking thin the yellow triangles)
Tried supercheap and bunnings and don't have anything that suits, anyone got another other ideas where might find them?
The Ragin Cajun
Anyone know were to get something along these. (the pinky looking thin the yellow triangles)
Tried supercheap and bunnings and don't have anything that suits, anyone got another other ideas where might find them?
Hardcore Biker
What do they do?
THE FOUR RULES OF EXPLORING THIS AMAZING COUNTRY OF NZ
RIDE SAFE, RIDE HARD, RIDE FREE
and try not sound so route 51 american brudda
The Ragin Cajun
they are just some bungs pretty much to cover up some pipes associated with the PAIR valveOriginally Posted by StClingin
i'm motarded
do they have to be pink?
The Ragin Cajun
nope don't care on colour, yellow be nice, but colour don't care just want to cover the holes with a bung of some kind.
fuckin grumpy leave me alone
easy enuff to make Neal
give me dia and length I will make you a couple,
as long as there not for a suzuki
Dave
"Kiwi Biker, still a great place despite the mods "
"Would crawl over broken glass before owning Suzuki"
The only reason I only ride in the Iron man Class is I have no friends left to enter the two man events,
my own fault really.
i'm motarded
supercheap or repco have the bungs, in black rubber (on those racks with the bolts and plastic molding clips), and you can buy the spring clips there too.
The Ragin Cajun
yeah mount didn't have any yesterday(looked at that rack), when i called in there, was gonna pop in to repco later on today and see if they did,
Cheers mate.
For whom the bell tolls
I got some for my GSXR to do what im guessing is the same thing, but with a different system.
Got them from my local Supercheap... they're just rubber vacuum plugs. Cost all of $3 if I remember correctly.
KiwiBitcher
where opinion holds more weight than fact.
It's better to not pass and know that you could have than to pass and find out that you can't. Wait for the straight.
The Ragin Cajun
yeah same thing mate picture above is from yoshi k3-4 kit. which is same as 600/750/1000
i going a step further and pulling the pair unit out and putting a resistor in to fool ecu to think its there.
For whom the bell tolls
What size do you need? Could shoot up to supercheap on the way home and see if they have something suitable?
Looks to be 1-1.5cm?
I got the full setup ready to go at home which cost around $15 and will have bits left over, but im not plugging those particular holes as im replacing the PAIR valve with a T-junction which then goes down to the crank case breather if i remember correctly. Put a little vacuum cup like those ones on the end of the hose from the injectors that usually goes to the PAIR valve and then its done. My tank is a bitch to line up when reassembling stuff so i'm waiting till i put in a K&N before i do the mod.
KiwiBitcher
where opinion holds more weight than fact.
It's better to not pass and know that you could have than to pass and find out that you can't. Wait for the straight.
The Ragin Cajun
no worrys mate, i got a repco and supercheap 5 mins from home.
got the hose in the car. so i can check what will fit. i only need two, to go on top of head, since the pair solenoid, don't need to plug those holes
keeping the hose from crackcase to airbox but i got a yoshi oil catch collector to go in there.
The Ragin Cajun
repco had nothing
supercheap had 10mm plugs
which are to small,
i'm motarded
is there a car aircon place down here? all they are are vacum plugs. what size are they? you could try places like plastic box, or payless plastics, para rubber, ie use the rubber bungs they have for chair legs etc.
or a farm supplies shop like RD1 will probably have something as well.
The Ragin Cajun
yeah i try a got couple other places tonight,
though i just put information in that supercheap doesn't sell the right size ones.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks