GSX750F Katana bar risers?

[Clivoris]

Hi All.
My cousin is having to raise the bars on his Katana, or find another more comfy bike. He has searched around on the net without success so I wondered if any of the big brains around here knew of anywhere he might be able to source some risers.

[Bonez]

You may find risers on other suzuki models such as the Bandits may fit directly to the 750F top triple clamp once the plate with the standard bars are removed .

I was having a good gander at KiwiKats one last week thinking if i bought one I'd fit tube bars on it.

[geoffm]

Try F1 engineering in Hamilton

[Nasty]

I am sorry Clivoris .. but let your cousin know I dont think there is a more comfortable bike

[KiwiKat]

You may find risers on other suzuki models such as the Bandits may fit directly to the 750F top triple clamp once the plate with the standard bars are removed .

I was having a good gander at KiwiKats one last week thinking if i bought one I'd fit tube bars on it.

Most of the fittings for the bigger Suzukis look like they are generic fits. Also check Vstrom. Go http://www.katriders.com and you will find everything you need to know. Also lots of other mods for the Kat. With US dollar in decline it's a good time to by direct from the states.

If you're raising bars I would suggest an uprated screen, e.g. double bubble.

[Bonez]

Most of the fittings for the bigger Suzukis look like they are generic fits. Also check Vstrom.

SV 650 risers may fit too.

[Clivoris]

Very cool suggestions folks. I too thought about F1`engineering but wondered if something was already being made, somewhere in katana land. I've tried talking him into a Tuono or Aprilia Shiver but he isn't soft enough.

[McJim]

The GSX750F is like a happy shopper - so upright it's like sitting on a cruiser...so have I read this correctly? Someone wants to raise the bars?

I would have thought getting spacers made and some longer bolts would do the trick. Get a nice thick piece of aluminium say 10mm and cut out the shape where the handlebars bolt onto the triple clamp. Then get a drill and drill the boltholes through it.

Something I would do in the garage if I had wanted to when we had the GSX750F.