just change the fuel, run it on nitromethane from the model stores - put about 1/4 a cup in a tank of gas.
just change the fuel, run it on nitromethane from the model stores - put about 1/4 a cup in a tank of gas.
Then I could get a Kb Tshirt, move to Timaru and become a full time crossdressing faggot
its the stuff RC cars and planes run on, also the drag cars use it to.
Then I could get a Kb Tshirt, move to Timaru and become a full time crossdressing faggot
Nitrous Oxide System if your really keen. its been done before, goes like a rocket, all the way to the garage just in time to give it a rebuild.
HOLDEN fan for life.
He's the greatest damn mechanic that you ever have seen,
Rounding off bolts since the age of 14.
Police Tab to date $940
Blinder X45 just fitted!!!
Leveling the playing field
the nitro from the modle stores is the liquid from of nos and is waaaay cheaper, easy to mix it to your desired performance gain etc etc
Then I could get a Kb Tshirt, move to Timaru and become a full time crossdressing faggot
Push it out the back door of one of these
All of the aforementioned methods (the serious ones) of tuning two-stroke engine seem valid.
The issue with scooters and the way the transmission works is matching the drive engagement to the torque characteristics of the engine. You could end up improving the performance of the engine considerably and end up with a slower scooter because the peak torque is generated at a rev range that is never achieved with the standard trans. It takes some experimentation with the centrifugal drive roller weights etc to get this right.
Unfortunately for you these parts may not be readily available for the Melody. The earlier model Japanese scooters weren't really thought of as things worth hotting up and as such performance bit for these are difficult if not impossible to find.If you want to tune a moped get a Piaggio, or if you can a Suzuki TR50, now that's a scooter!
theres some clown on trademe selling scooters designed to do wheel stands.
HOLDEN fan for life.
He's the greatest damn mechanic that you ever have seen,
Rounding off bolts since the age of 14.
Police Tab to date $940
Blinder X45 just fitted!!!
Leveling the playing field
i've heard that pods filters (once the mix has been corrected so it doesn't seize) can make a noticable difference to small motors like these....
and expansion chamber is a finely tuned piece of equipment so don't expect miracles from swapping from other bikes
and remember anything you do to make it faster will ultimately shorten it's life
so you're better off buying a decent scooter/small bike to begin with
and i'm told that technically if you put out more that 2.2KW it's no longer classed as a moped
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks