Help with a wheel anyone?

[SHELRACING]

Can anyone help with a Rear wheel for my suzuki gsx400 Pre 89

I need a 17 x 3.5 or 17 x 4 might do it. Needs to be a Suzuki wheel cos of the axle size. Typically GSXR, RGV, GS500

I can buy or do a swap. I have a pair of 17in impulse wheels, and a 17in FZ rear.

Urgently needed for Taupo track day 1st March

Cheers
Steve

[koba]

I have one that may be useful, will have a look at lunchtime tomorrow.
It has a 160 supercorsa on it at the mo too.

It's a Suzuki rim, not sure what it is off but look at my profile pic to get an idea.

I was thinking of sticking it on the back of my VFR but somthing narrower and 17inch would suit better as it is a REAL tight fit in the swingarm, I needed to get countersunk capscrews for the rear disk to make it all work and even then it was looking very tight.

What size are the rims you have?
Axle diameter?

[Buddha#81:Me]

Can anyone help with a Rear wheel for my suzuki gsx400 Pre 89

I need a 17 x 3.5 or 17 x 4 might do it. Needs to be a Suzuki wheel cos of the axle size. Typically GSXR, RGV, GS500

I can buy or do a swap. I have a pair of 17in impulse wheels, and a 17in FZ rear.

Urgently needed for Taupo track day 1st March

Cheers
Steve

A CBR250 MC14 wheel went straight into my GSX400F with minor machining, project here http://www.visordown.co.nz/go/viewtopic.php?f=23&t=121 The axle was the right dia and all.

[SHELRACING]

I have one that may be useful, will have a look at lunchtime tomorrow.
It has a 160 supercorsa on it at the mo too.

It's a Suzuki rim, not sure what it is off but look at my profile pic to get an idea.

I was thinking of sticking it on the back of my VFR but somthing narrower and 17inch would suit better as it is a REAL tight fit in the swingarm, I needed to get countersunk capscrews for the rear disk to make it all work and even then it was looking very tight.

What size are the rims you have?
Axle diameter?

Cheers Koba,

I have a pair of 17 in Impulse wheels 2.5 x 17 Front and a 3.0 Rear. Axle Dia 15mm

A rear fzr 250 wheel 2.5 x 17

I wouldn't need the tyre it wouldn't fit my swingarm, Besides I have a brand new Dunlop GPRa10

I need a 3.5 preferably with a 15mm axle dia.

Let me know what you have

Steve

[koba]

Sorry I'm slow!

Will look today, I got all busy getting ready for and going to Paeroa.
It was MINT.
Anyway because you need it quick if it is the correct size I can get it courriered to you.
I'm pretty sure the axle is 15mm.