You could but there are far better options in terms of suitable widths, and it depends what the width of the rear wheel is so you get a could width ratio front to backOriginally Posted by DELLORTO
Who You Calling a Pig
You could but there are far better options in terms of suitable widths, and it depends what the width of the rear wheel is so you get a could width ratio front to back
For the record Qkkid was in my bed, not the other way round
Very controversial
its just theres a fxr front wheel on trade-me with a tire for a good price.....so would be able to put that fxr wheel on my gs125 without any trouble or modifications?
chuck norris's calender goes from march 31st to april 2nd
No one fools chuck norris.......
Who You Calling a Pig
I cant say without looking at it, but I would imagine there would need to be asome fabrication.
First thing you need to look at is the axle size (are they the same or different, if they are different can you just change the bearings in the wheel or is a more complicated solution required), follwed by wheel width (normally you will need some spacers fabricated to fit a non standard wheel to a set of forks), with the thrid factor being the brake caliper an disk (do they atch up or do yu need to make up a bracket so it will fit)
Who You Calling a Pig
Just had a thought, where abouts in Aucks are you? If you want to look at how much work will be required to fit a FXR rim prior to spending any money I have got one here that you that you are welcome to borrow for that purpose.
Very controversial
im in mt eden close to you.....im picking up the bike the bike tommorow so ill measure it then,
chuck norris's calender goes from march 31st to april 2nd
No one fools chuck norris.......
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks