Bucket bits wanted & services needed

[motorbyclist]

I'm after whole engines or just the cylinders and heads. The condition does not matter though I would prefer them to be closer to standard. If the bore is last oversize and completely screwed that is OK.

haha you're not the only one!

I'd be keen to trade a std one for my fast approaching 1.5mm oversize one in the forseeable future

[F5 Dave]

I know where a couple are. Just they've been opened up to 200degrees with a square port so sharp you could shave with it. Savages with files.

[BOGAN02]

Gday fellow bikers. i have a suzuki ax100 that i have recently got going. (with help and info from some kiwibikers) was wondering if anyones keen on swaps for something or to buy it. will post some pics if anybodys intrested.

[motorbyclist]

pics! (might get us interested)

[BOGAN02]

these are just a few pics.and a before photo of when i got the bike. well after a lil assembly. when i got the bike it was all in pieces. i have since replaced the coils in the magneto. replaced the spark coil. and done a few mods. and thanks to the wise skunk was able to figure all the shit bout this bike out.

[quallman1234]

How much did it cost you to replace the magneto coils? I have a spare one of these engines, but with a buggered stator. Also have a .5 OS piston.

[Bert]

Has any found or know of a source for TF100 pistons (after market ones are fine) or direct me to a nz website ?
(my normal source has dried up).
We are building up a "have a go bike" (or spare for me ) with all the spares sitting in my shed.

[BOGAN02]

How much did it cost you to replace the magneto coils? I have a spare one of these engines, but with a buggered stator. Also have a .5 OS piston.

They cost me a measly $40 second hand. And now the bike works mean.

[BOGAN02]

Im also looknig for a cheap dash, head light, indicators, loom. for the ax100. might aswel get it nearly road worthy before i get rid of the beast.

[nudemetalz]

Anyone here got the seat off one of these, ie the studded one?
Condition unimportant.

Happy to pay in cash

[F5 Dave]

Has any found or know of a source for TF100 pistons (after market ones are fine) or direct me to a nz website ?
(my normal source has dried up).
We are building up a "have a go bike" (or spare for me ) with all the spares sitting in my shed.

surely Wiseco ones are availiable through any shop? Think Whites or sportspro were distributors (don't quote me).

[Squiggles]

Looking for a flywheel for an RX125, current one has F3V6 M17ZK stamped on it

[Pumba]

Looking for a flywheel for an RX125, current one has F3V6 M17ZK stamped on it

Is that for the bike you got off garath? If so it has an AG100 Flywheel on it not an RX. Was done when I dumped the points and converted it to CDI ignition. I think I still have the RX fllywheel and base plate in the shed at home if you want it

[Squiggles]

Is that for the bike you got off garath? If so it has an AG100 Flywheel on it not an RX. Was done when I dumped the points and converted it to CDI ignition. I think I still have the RX fllywheel and base plate in the shed at home if you want it

Right then, looking for an AG100 flywheel Did it need modification to fit?

Edit: Is it an AG100 flywheel on an RX mounting plate =\

[jasonu]

Wanted 1994 RS125 forks with triple clamps. If the brake caliper and clip on handelbars are included that would be nice too.
Please reply to this listing or email jasonulyatt.1@msn.com
If you live in Auckland I will come and collect them, for anywhere else I will either get someone to collect them from you or get you to post them at my expense.
Let me know what you have got and what you want for it.
Cheers