Bucket bits wanted & services needed

**motorbyclist** · 28th June 2010, 16:28

Originally Posted by motorbyclist

Magua also needs a new coil

(i called it; squiggles was wrong

)

coil found at wreckers in kumeu, now needing entire wiring loom lol

**ajturbo** · 28th June 2010, 17:26

Originally Posted by NOID

Rito i need an FXR front wheel, tyre doesnt have to be anything special as long as i can roll it around the shed. doesnt need to have the disk or the axle. let me know what you have.

i have a couple of front wheels off the GT.. one even has a tyre on it...

**Muzzab** · 29th June 2010, 08:18

Originally Posted by motorbyclist

coil found at wreckers in kumeu, now needing entire wiring loom lol

Shouldn't take much, my RX runs on about 3 wires by the look of it.

**Henk** · 29th June 2010, 10:20

Originally Posted by Muzzab

Shouldn't take much, my RX runs on about 3 wires by the look of it.

If you flick me a copy of the wiring diagram I'll have a look at it and see if I can work out what you actually need. My FXR has about 5 wires in it.

**Arronduke** · 5th July 2010, 18:51

My CG125 condensor has died and now i need a new one... any ideas?
New or used would be great.

thanks

**motorbyclist** · 5th July 2010, 23:03

Originally Posted by Arronduke

My CG125 condensor has died and now i need a new one... any ideas?
New or used would be great.

wrecker would be fine for that....

try Neil up in kumeu - 09 412 5820

**Arronduke** · 6th July 2010, 17:40

Thanks for that.

**Ryan/rossi** · 10th July 2010, 13:57

hey
anyone have a zxr 250 master cylinder or anything really to go on my bucket?

**motorbyclist** · 10th July 2010, 14:58

anyone know where I could get a CB125t service/workshop/haynes/clymer type manual, electronic or physical ? not keen on paying the US$30 for a new one

**Dutchee** · 10th July 2010, 15:24

Originally Posted by motorbyclist

anyone know where I could get a CB125t service/workshop/haynes/clymer type manual, electronic or physical ? not keen on paying the US$30 for a new one

http://www.trademe.co.nz/Trade-Me-Mo...-301819309.htm

**motorbyclist** · 11th July 2010, 12:58

cheers... still holding out for something cheap/free though

**motorbyclist** · 13th July 2010, 17:09

anyone know the standard size number for the cb125t pilot jet? mine is munted from previous owners and needs replacement/redrilling but no idea what size it is

looking to buy the stock size and maybe one larger considering mods made to the bike...

**Jonno.** · 15th July 2010, 22:07

I'm looking for an fxr right rearset (no foot peg). Will pay...

**Henk** · 16th July 2010, 16:02

I can probably lend you one for this weekend on a you break it you fix / own it and if I crash and need it back you're out of luck basis. Will only be there for a while on Saturday but all day Sunday.