Bucket bits wanted & services needed

**Dutchee** · 9th January 2011, 13:51

Originally Posted by ac3_snow

any one in auckland have an old tf125 piston I can borrow? want to double check placement of locating pins for the rings before I get stuck into porting.
Cheers

http://www.trademe.co.nz/Trade-Me-Mo...-343283582.htm might be an answer if no success borrowing (but it is oversize)

**Rick 52** · 9th January 2011, 15:34

Originally Posted by ac3_snow

any one in auckland have an old tf125 piston I can borrow? want to double check placement of locating pins for the rings before I get stuck into porting.
Cheers

Yep got 1 but how do I get it to you ?I work in Silverdale and get into the city most days 'I could drop it off !!

**TZ350** · 16th January 2011, 16:55

I am looking for an RG125 motor, running or not. Second choice is RG150 engine or parts. If you have anything, please PM me.

**koba** · 16th January 2011, 17:36

Originally Posted by TZ350

I am looking for an RG125 motor, running or not. Second choice is RG150 engine or parts. If you have anything, please PM me.

Were 125s sold in NZ? I think they may be a euro model.

I'm shortly going to use my good rg150 crank and barrel to fix a mates minter road one so he can sell that, after which he will probably use my chassis as a cheapo bucket with another motor.
There is likely going to be leftover engine parts, probably a bit second hand but I will let you know when we know what we have left over.

**Pumba** · 20th January 2011, 06:21

Dont think the 125's were ever sold new but a few did get in (grey or private imports maybe?), I have the frame for one in my garden at the moment. No engine parts though

**Ivan** · 23rd January 2011, 22:52

Hi does anyone have any 30mm forks,

From base to top 664mm long??

My current Aprillia forks are miles to long for what I need

**kel** · 28th January 2011, 07:48

Wanted -
KE or KH125 Barrel, any condition. Please send a PM if you have or know of someone with one.

**Gigglebutton** · 28th January 2011, 17:13

Originally Posted by MrE_MaN

Looking for a Left side footpeg bracket for an FXR, or someone who can weld up the old one (to a woffable standard?) in the Aucks region. It's broken close to the footpeg hole, but looks fixable to my untrained eye.
...or some cheap but tasty rearsets.... mmmm.....

Or anyone with a cheap gn carb floating around, stupid wreckers asking $150 in "as is" condition

Cheers guys

I can weld them if still broken. Also made some from 10mm ali plate for Kelly
Dazz 0276535801

**kel** · 3rd February 2011, 16:09

Originally Posted by Gigglebutton

Also made some from 10mm ali plate for Kelly

And they're bloody great! I broke the original Suzuki brackets so many times that Giggles got sick of welding them and made me a set that will never need attention again.

Still looking for a KE or KH125 barrel, if anyone has one please let me know

**RDjase** · 3rd February 2011, 16:45

I know its not a bucket part but has anyone got a good KR150 barrel?

I stripped the engine on my sons KR to give it a freshen up before he starts racing in SS150 and at some stage in its life it has been low on oil and has scores in the bore

Bloody thing run well too, wouldnt have expected it too the state it was in
The oil pump and drive seem ok so must have been low/out of oil

**Moooools** · 7th February 2011, 19:25

I am after a used front (or pair) of 125gp slicks. Don't care what brand or how used, just need a tyre.

Max

**Yakman12** · 21st March 2011, 09:38

Hey guys

For those of you at Kaitoke this weekend, you may have noticed the awesome wobbly front wheel my CB125 has (number 15).

Long story short, the wheel is rather bent. I have discovered that the front end of the bike is from a Suzuki GT125.

So I'm after a straight front wheel assembly for one of these, I have been told a GP125 may be the same as well.

Cheers!

**Gigglebutton** · 21st March 2011, 20:36

After riding Scotties RS\GP125 on Sunday, i realized that to make my life complete i will have to make something similar. If you can help me on my quest let me know.

Dazz

**Rick 52** · 22nd March 2011, 17:23

That bike should have a WARNING on it !! Thats why I have mine good luck ...Plenty of time and money

Originally Posted by Gigglebutton

After riding Scotties RS\GP125 on Sunday, i realized that to make my life complete i will have to make something similar. If you can help me on my quest let me know.

Dazz

**jasonu** · 23rd March 2011, 05:10

Originally Posted by Gigglebutton

After riding Scotties RS\GP125 on Sunday, i realized that to make my life complete i will have to make something similar. If you can help me on my quest let me know.

Dazz

I could have sold you a front end last week but already gone thanks to tardme.