Bucket bits wanted & services needed

**Rick 52** · 14th May 2011, 08:30

Will bring them on Suday ..

**motorbyclist** · 20th May 2011, 18:59

what's on this weekend?

**Pumba** · 20th May 2011, 19:03

Originally Posted by motorbyclist

what's on this weekend?

your a week out

**Dutchee** · 20th May 2011, 20:41

there's a Waitemata club family day at woodhill,not sure what else is on though. Superbikes is on the following weekend, and moto gp is also having a break. Junior masterchef's on prime on saturday and we've got a dinner to go to.
I guess there will be trailrides on around the country, maybe some racing somewhiere, I dunno. Buckets was last weekend.
Oh, on Four is blackhawk down at the moment.

Oh, if you really have nothing to go to, the MNZ AGM's on in Palmerston. That's about the limit of what I know is on, but it's impressive I know that much.
hahaha (sorry for not quoting post above Pumba's - being lazy)

**Arronduke** · 20th May 2011, 21:24

Originally Posted by ac3_snow

I would very much like to borrow a carb that is of similar size and shape to a 24mm OKO/KEIHN flatslide.

I have one on its way (or not and i got scammed $700) but in the meantime I am trying to mount my engine. As there is not much room to play with in the carb vicinity, I would like to check clearances etc before I commit to making the mounts.

No... must be a mistake... $700 notes... I purchased my OKO carb.. landed for just over $100... maybe you brought half a doz... and got a bulk discount..

**Moooools** · 2nd June 2011, 21:00

Has anybody got a 15mm wheel axle that is at least 250mm long? Needs to 'standard' type. (Bolt head on one end and thread on the other)

A TZR 1KT rear axle would work...

Max

**Henk** · 2nd June 2011, 21:33

Had a few wines and too lazy to go and look right now.
Any idea if either GSXR250 or Impulse axles would work and are you after front or rear?
Just read your post again. That would be rear.

**Moooools** · 2nd June 2011, 22:15

I have no idea if they would work. If you could measure one up it would be good.

It doesn't matter if it is front or rear, just that it is 15mm and over 250mm long.
15mm is the same diameter as an FXR front axle...

**Slingshot** · 2nd June 2011, 22:17

Originally Posted by Moooools

Has anybody got a 15mm wheel axle that is at least 250mm long? Needs to 'standard' type. (Bolt head on one end and thread on the other)

A TZR 1KT rear axle would work...

Max

TZR real wheel in a RGV frame per chance?

**Moooools** · 2nd June 2011, 22:22

Originally Posted by Slingshot

TZR real wheel in a RGV frame per chance?

No. Try RS 125 front wheel in zxr 250 forks in tzr frame. The zxr forks have a 20mm axle so I am having to do some adaptation. The axle is going to be modified so it doesn't really matter what it is off.

**Henk** · 2nd June 2011, 22:29

I'll try and remember to have a look over the weekend, not gaurantees, alzheimers

**Henk** · 2nd June 2011, 22:30

I'll try and remember to have a look over the weekend, no gaurantees, alzheimers

**Henk** · 3rd June 2011, 16:23

Originally Posted by Moooools

I have no idea if they would work. If you could measure one up it would be good.

It doesn't matter if it is front or rear, just that it is 15mm and over 250mm long.
15mm is the same diameter as an FXR front axle...

15mm x 305 do? GSXR250 rear axle.

Sorry about the double post above, these things can happen when you drink your dinner.