Does anyone have a brake caliper for an RG50. I took the caliper apart today and found it had a ring of corrosion around the piston
Does anyone have a brake caliper for an RG50. I took the caliper apart today and found it had a ring of corrosion around the piston
yeah think I do
Don't you look at my accountant.
He's the only one I've got.
Thought I had a pretty mint one, just popped down for a quick look and it's still there. Tried to move the piston but it didn't want to so I'll have to have a better look in next day or so to see if its serviceable. I did have it loosely connected to a random system but can't remember if it always was.
Don't you look at my accountant.
He's the only one I've got.
And while we're talking rg50.... I'm fixing an rg50 used for "young junior road race" and it has an expired stator. I sold a complete bottom end to someone up north last year. Wish i had it now! Any leads to another stator appreciated. Pls pm me Ta Peter Jones
Looking for a flatside carb suitable for a FXR. 30 or 32mm
For some reason the pwk carb I have uses 100/604 round jets and I half the morning trying to get hold of an 80 82.5 85 87.5 and a 90 does any one know where I can get these in Auckland?
Try cycle treads, they should be able to get them in.
I may have what you need but will have to check.
Stock is best
Never used these before so I need to ask, will a 110x17 warmer fit a GP125 90x19 reasonably well?
If you get stuck I have some keihin knock off unmarked (as in no size stated) round main jets you can have. Fill them with solder and drill them to size (our friendly engineer has a jet drill kit)
or you could try http://www.trademe.co.nz/motors/moto...-635773383.htm he's located out the back of Whitford
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks