Bucket bits wanted & services needed

[husaberg]

Hi, can anybody point me in the direction of a 15T 415 front sprocket to suit a FXR? Been pouring over the JT catalogs with no joy
Thanks.

What you want is the std Rs125 Honda.

http://www.kiwibiker.co.nz/forums/sh...Help-RS125-NF4

OKay this is what i have found out i think there was some confusion with my two pics that i missed......

RS125 Hondas sprokets are the same spline as a RG125 FXR150 and GP125 so anyone wanting to do a 415 conversion buy these.
AS confirmed by Diesel pig (thanks Neil)

If you have a Honda NSR125 well you will have to modify something to work......bugger

[timg]

Thanks Husa That makes life very easy

[TZ350]

Hi, can anybody point me in the direction of a 15T 415 front sprocket to suit a FXR? Been pouring over the JT catalogs with no joy
Thanks.

Try Trademe for 428 sprockets. 428 is the std chain size for a FXR150. A 428 sprocket can be trimmed to 415 but a 428 cant be trimmed to 420 as a 420 uses a different roller size.

17mm spline

http://www.trademe.co.nz/motors/moto...1111815284.htm

Need to check the spline size, there seems to be two std sizes, 17mm and 20mm one size spline fits the FXR and a heap of smaller bikes.

20mm spline

http://www.trademe.co.nz/motors/moto...1110992725.htm

[mr bucketracer]

Thanks Husa That makes life very easy

that is one spacey sproket i have lots of

[F5 Dave]

Try Trademe for 428 sprockets. 428 is the std chain size for a FXR150. A 428 sprocket can be trimmed to 415 but a 428 cant be trimmed to 420 as a 420 uses a different roller size.

17mm spline

http://www.trademe.co.nz/motors/moto...1111815284.htm

Need to check the spline size, there seems to be two std sizes, 17mm and 20mm one size spline fits the FXR and a heap of smaller bikes.

20mm spline

http://www.trademe.co.nz/motors/moto...1110992725.htm

Wot you talking about Willis (see what i almost did there).

You can skim 420 to 415 but not a 428, as the 428 is the heavier duty chain an has a larger roller pin than the smaller chains. Go ahead and measure them.

[husaberg]

Wot you talking about Willis (see what i almost did there).

You can skim 420 to 415 but not a 428, as the 428 is the heavier duty chain an has a larger roller pin than the smaller chains. Go ahead and measure them.

that's my understanding as well the pitch is the same but the rollers are biggerererer
Seeing as you two are here anything to add on this thread?

http://www.kiwibiker.co.nz/forums/sh...-to-bike/page2

[cotswold]

that's my understanding as well the pitch is the same but the rollers are biggerererer
Seeing as you two are here anything to add on this thread?

http://www.kiwibiker.co.nz/forums/sh...-to-bike/page2

yep been there, 420 will grind to 415, I have 5 done for my 50

[TZ350]

Wot you talking about Willis ... You can skim 420 to 415 but not a 428, as the 428 is the heavier duty chain an has a larger roller pin than the smaller chains. Go ahead and measure them.

Fwk I git that wrong ... thanks for clearing it up.

[Henk]

Still after an FXR choke cable.
Surely somebody has one they haven't thrown out yet.

[Pumba]

Still after an FXR choke cable.
Surely somebody has one they haven't thrown out yet.

Will have a look in my pile tonight and put one in the post tomorrow (need to go to the post shop anyway). Really thought you would have found one by now closer to home by now

[Autech]

Looking for an FXR150 coil, I imagine there's a few kicking about.

[Autech]

Looking for an FXR150 coil, I imagine there's a few kicking about.

Anyone got one?


Sent from my iPhone using Tapatalk

[Grumph]

Anyone got one?

Talk to Wallace - pretty sure he's been looking at alternatives.

[husaberg]

Anyone got one?


Sent from my iPhone using Tapatalk

FXR150.co.nz i am pretty sure has the service manual, get the ohms spec out of it and have a look for a coil that is similar spec.

[Autech]

Thanks for the suggestions lads.

Suzuki can get one for $109 OEM. There's a cheap one on the internets for $25 (don't want to risk a race round on a cheap coil).

I will do as suggested an find out the specs on the coil and see if there's a suitable alternative, I'll also email Wallace.