Results 1 to 7 of 7

Thread: Diagnosis - 'knocking/tapping' at low revs

  1. #1
    Join Date
    2nd December 2008 - 10:56
    Bike
    None :<
    Location
    Auckland
    Posts
    37

    Diagnosis - 'knocking/tapping' at low revs

    Howdy

    1997 Honda VTR250, under 8000ks, and in the last month or so it seems to have developed an occasional knocking/tapping coming from the engine at low revs (maybe I just cant hear it at high revs). I mostly notice it in 3rd but also in 2nd.

    Is there any common causes for such things?

  2. #2
    Join Date
    28th March 2008 - 21:24
    Bike
    Honda VTR250 (2003)
    Location
    Auckland
    Posts
    91
    Perhaps the tappets need to be adjusted? Best to check with a mechanic. Unusual for it to happen at low kms though. Did you do your 6K scheduled check?

  3. #3
    Join Date
    2nd December 2008 - 10:56
    Bike
    None :<
    Location
    Auckland
    Posts
    37
    Quote Originally Posted by crazyv View Post
    Perhaps the tappets need to be adjusted? Best to check with a mechanic. Unusual for it to happen at low kms though. Did you do your 6K scheduled check?
    I'm not entirely sure what tappers are

    I bought it at 5500 from a mechanic who serviced it himself. I will get it checked out, but just thought I would see if there was anything I could look at myself before then.

  4. #4
    Join Date
    28th March 2008 - 21:24
    Bike
    Honda VTR250 (2003)
    Location
    Auckland
    Posts
    91
    To check Tappets need to open up to the engine - tappets make contact with intake or exhaust valve

  5. #5
    Join Date
    30th March 2004 - 11:00
    Bike
    2001 RC46
    Location
    Norfshaw
    Posts
    10,455
    Blog Entries
    17
    Does the noise go away when you pull the clutch lever in? (Some clutch baskets rattle).
    Does the noise go away when you rev the bike a bit? (Could be the camchain).
    ... and that's what I think.

    Or summat.


    Or maybe not...

    Dunno really....


  6. #6
    Join Date
    22nd March 2007 - 10:20
    Bike
    2015 HD Street 500
    Location
    Blenheim
    Posts
    2,178
    Have you changed the type of fuel you are using?
    Could be pre ignition caused by low octane fuel
    just a thought

  7. #7
    Join Date
    2nd December 2008 - 10:56
    Bike
    None :<
    Location
    Auckland
    Posts
    37
    Quote Originally Posted by crazyv View Post
    To check Tappets need to open up to the engine - tappets make contact with intake or exhaust valve
    Hmm, ic

    Quote Originally Posted by vifferman View Post
    Does the noise go away when you pull the clutch lever in? (Some clutch baskets rattle).
    Does the noise go away when you rev the bike a bit? (Could be the camchain).
    Im not sure about the clutch, I will check that next time it happens. As far as I can tell it it goes away with revving.

    Quote Originally Posted by Subike View Post
    Have you changed the type of fuel you are using?
    Could be pre ignition caused by low octane fuel
    just a thought
    No change in fuel

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •