Laxed out rides

[carver]

3 Problems

1. Work
2. Too tired
3. Too many bugs on the bike, it needs a clean first

pussy......

[Leyton]

Thanks for the ride Spazm!! That would have to be the most exhausting ride I have been on to date! Mind you.. am getting soft I think :P

Thanks to those who slowed or stopped to check on me the last half of the ride

[carver]

Thanks for the ride Spazm!! That would have to be the most exhausting ride I have been on to date! Mind you.. am getting soft I think :P

Thanks to those who slowed or stopped to check on me the last half of the ride

all good, i hope my mentoring helps

what a weekend, 800km on the GSX650F, the first lot in the rain.
i think i may have ridden off the edge of the tires today, as the photo shows

i have never seen that happen before from memory.

Nice paced ride spazm, i nice fast cruise.

most bins wins

nice wheelies 1wheelriot!

[sil3nt]

Whats with the formula challenge sticker? I was down there last week driving the single seater. Awesome fun.

[ckai]

what a weekend, 800km on the GSX650F, the first lot in the rain.
i think i may have ridden off the edge of the tires today, as the photo shows

Mate, that second shot on the dock is pretty cool. Where'd you take that?

[Sidewinder]

Mate, that second shot on the dock is pretty cool. Where'd you take that?

at the end of a dock, duh!!!!!!!

[Leyton]

all good, i hope my mentoring helps

It is certainly a stange possition to ride in the ol twist, I tried to impliment it. My body was saying... yeah ... maybe.. yeah ok.. but the brain was going.. F'Off!! do what you know your body is too wasted. And yeah it was!!! hehe farrr.. I need to lay off the V and Cookietime biki every morning honestly :P

Was good to finally go on a ride with you hehe

Will see what I can do about the front suspension! It may or may not improve the riding and stability humm, the question is.. how many clicks,, MMMM.

When I adjusted my rebound it made a huge difference to my riding! I am picking setting the rest of the bike up and finding some happy medium. My biggest fair is never finding it though! hehe

1wheelriot! <-- I swear he needs not, a front wheel :P

[carver]

Whats with the formula challenge sticker? I was down there last week driving the single seater. Awesome fun.

not sure, it was not me who put it on there

Mate, that second shot on the dock is pretty cool. Where'd you take that?

rotorua!

It is certainly a stange possition to ride in the ol twist, I tried to impliment it. My body was saying... yeah ... maybe.. yeah ok.. but the brain was going.. F'Off!! do what you know your body is too wasted. And yeah it was!!! hehe farrr.. I need to lay off the V and Cookietime biki every morning honestly :P

Was good to finally go on a ride with you hehe

Will see what I can do about the front suspension! It may or may not improve the riding and stability humm, the question is.. how many clicks,, MMMM.

When I adjusted my rebound it made a huge difference to my riding! I am picking setting the rest of the bike up and finding some happy medium. My biggest fair is never finding it though! hehe

1wheelriot! <-- I swear he needs not, a front wheel :P

go fully soft, and wind them in as you see fit

[Spazm]

Glad to see you guys enjoyed that route too.. always good to see new faces on the rides.. pity quasievil and insomnia couldn't make it for the whole ride

I'm going to schedule in the Te Anga - Marokopa - Awakino ride for the first or second weekend of October that leaves a couple of weekends in between for other people to suggest rides to go on in between

[STJim]

I'm going to schedule in the Te Anga - Marokopa - Awakino ride for the first or second weekend of October that leaves a couple of weekends in between for other people to suggest rides to go on in between

Hamilton Ulysses is running that ride next weekend under the heading of" Moku for whitebate fritters." Returning up the back road. Will let you know what the gravel is like
On the first weekend in October Ulysses is running its annual 500 miles in 12 hours starting at Cambridge B P 7.00 am on Sunday 4 October if any one is interesed in an introduction to Endurance Riding

[Leyton]

go fully soft, and wind them in as you see fit

Cheers dude, I might knock em down quite a bit and put on a cable tie and see how much I have to play with

[insomnia01]

[QUOTE=Spazm;1129404609]Glad to see you guys enjoyed that route too.. always good to see new faces on the rides.. pity quasievil and insomnia couldn't make it for the whole ride
QUOTE]

was'nt much fun having the RR continually step out on me when those showers came down checked me service records seem to have still managed 10000+ kms out of it FR still got a few kms in it but will change at the same time ( 12500km currently on FR ) May time new set for Te Anga run

[Quasievil]

Cheers dude, I might knock em down quite a bit and put on a cable tie and see how much I have to play with

If you want to get the suspension working properly, invest the time and energy and a little coin and get it done by someone who knows what they are doing and talking about, no disrespect to the others offering you help above, but its a finely tuned art that involves alot more than adjusting the little knobs and things, you need to look at Sag, total sag etc etc.
My advise is to get it done right, get a few settings organised, road, track etc and take a note of it.
Also get a notebook and take note of EVERYTHING you do.........so you have a record and you can go back etc including tyre pressures.

You can get right into this stuff, but a few qualified setting adjustments will make your ride that much nicer.

[Leyton]

Cheers Quasievil! , Waikato Yahmama offered to tweak a few things but I am not sure if they know what they are doing, have not heard any good or bad reports from them.

[Quasievil]

Cheers Quasievil! , Waikato Yahmama offered to tweak a few things but I am not sure if they know what they are doing, have not heard any good or bad reports from them.

Well it of course depends how serious you are, any muppet can tweak it but will they be doing it right............fuck knows you tell me lol , if you want it done right first time go and see Robert from CKT technical or Ray Clee or someone with qualifications to do it.