Front discs?

[ducatilover]

Where does one find reasonably priced front discs for a 92 onwards CB400 superfour? They seem to be 400 for the set....
As far as I am aware they are the same as
RS 125 1990-1994
HONDA - RS 125 1995-2003
HONDA - RS 125 2004-
HONDA - RS 125 R 1990-1994
HONDA - RS 125 R 1995-2003
HONDA - RS 125 R 2004-
HONDA - RS 250 R 1988-1989
HONDA - RS 250 R 1990-1992
HONDA - RS 250 R 1993-1994
HONDA - RS 250 R 1995-2006
HONDA - CB 400 N NC- 1982-1985
HONDA - CB 400 N 1986-1988
HONDA - CBR 400 F 1992-
HONDA - CBR 400 F, F2 1984-1987
HONDA - CBR 400 RR 1988-1989
HONDA - CBR 400 RR 1990-1994
HONDA - RVF 400 R RT,RT-II 1994-1996
HONDA - RVF 400 RR RR-II 1994-1996
HONDA - VFR 400 ProArm 1991-1994
HONDA - VFR 400 R 1989-1990
HONDA - VFR 400 R 1991-1992
HONDA - VFR 400 R III R3K,R3N 1991-1992
HONDA - CBR 600 F FS,FT,FV,FW 1995-1998
HONDA - CBR 600 F SuperSport F3 1995-1998
HONDA - CBR 600 SE 1998
HONDA - CBR 600 SJR 1996
HONDA - VFR 750 F R-W 1994-1998
HONDA - CBR 900 RR Fireblade R,S 1994-1995
HONDA - CBR 900 RR Fireblade T,V 1996-1997
HONDA - VTR 1000 Firestorm / SuperHawk

[imdying]

$400 for a set of discs is reasonably priced.

[ducatilover]

$400 for a set of discs is reasonably priced.

It is?
Oooh found a set of wave discs for $400, done. :sunny:

[imdying]

Before you blow your load on those, be aware that the chinks have been pumping out wavey discs in their thousands as of late, and they're not all up to scratch. Fine if they're $50 each, that you can probably afford to lose.

[ducatilover]

Before you blow your load on those, be aware that the chinks have been pumping out wavey discs in their thousands as of late, and they're not all up to scratch. Fine if they're $50 each, that you can probably afford to lose.

:shutup: Chink made? Hmmm time to do more resaearch I think, I'm off to google even more. Certainly not pissing 400 down the drain....

[MSTRS]

Try these guys... vicwreck@iinet.net.au

[steelestring]

http://www.metalgear.com.au/

Aweseome quality. Kits come with new pads. I think you can send your disks away and they can re-use your carriers too.

Got them on front and rear.

NZ distributer...


W. White (Wholesale) Ltd 14 Karewa Place
Suburb: Hamilton, Region:
Country: New Zealand, ZIP:
Phone: + 64 7 849 5493, Fax: + 64 7 849 6493
Email: sales@whites.co.nz
Website: www.whites.co.nz

[The Pastor]

are they the same as mc22 discs?

[imdying]

:shutup: Chink made? Hmmm time to do more resaearch I think, I'm off to google even more. Certainly not pissing 400 down the drain....A lot of things are Chinese made these days, and plenty of the products are fine. It's not the country so much as the variable quality. The ones you get might be sweet, or they might be crap, the problem is you won't know till you've put some miles on them. If you buy Honda ones, they'll be just like all the other Honda ones.

Plenty of good examples of this... those little A115 powered pocket bikes... some the frames are shite, some they're not too bad... those little key ring video cameras, some are shite, some aren't too bad... we could go on and on, but you get the idea I'm sure.

The Chinese most definitely can make good product, but you won't know till you've paid out.


http://www.metalgear.com.au/I have one on the back of the RGV, and I've sold them to others who were quite happy with them... I'd buy them again.

[ducatilover]

http://www.metalgear.com.au/

Aweseome quality. Kits come with new pads. I think you can send your disks away and they can re-use your carriers too.

Got them on front and rear.

NZ distributer...


W. White (Wholesale) Ltd 14 Karewa Place
Suburb: Hamilton, Region:
Country: New Zealand, ZIP:
Phone: + 64 7 849 5493, Fax: + 64 7 849 6493
Email: sales@whites.co.nz
Website: www.whites.co.nz
Cool thanks :sunny: That's certainly worth looking at

are they the same as mc22 discs?

I think so mate, 296mm


A lot of things are Chinese made these days, and plenty of the products are fine. It's not the country so much as the variable quality. The ones you get might be sweet, or they might be crap, the problem is you won't know till you've put some miles on them. If you buy Honda ones, they'll be just like all the other Honda ones.

Plenty of good examples of this... those little A115 powered pocket bikes... some the frames are shite, some they're not too bad... those little key ring video cameras, some are shite, some aren't too bad... we could go on and on, but you get the idea I'm sure.

The Chinese most definitely can make good product, but you won't know till you've paid out.

I have one on the back of the RGV, and I've sold them to others who were quite happy with them... I'd buy them again.
Bit of a gamble with the chinker stuff then? I'll look at metalgear.com

[AllanB]

The dollar is really good with the US presently - price up some of the name brand ones - Galfer EBC etc.

[ducatilover]

The dollar is really good with the US presently - price up some of the name brand ones - Galfer EBC etc.

Thanks, google is my mate again!

[The Pastor]

cool thanks :sunny: That's certainly worth looking at


i think so mate, 296mm


bit of a gamble with the chinker stuff then? I'll look at metalgear.com


i have a set of mc22 discs, $200, you buy it, i'll hold onto the $$ for 2 weeks if they dont fit, post em back and i'll give u ur moneys back

[imdying]

Bit of a gamble with the chinker stuff then? I'll look at metalgear.comGamble basically sums it up... might be sweet, might not, but you won't know till you try them. Fine if you've got the money and time to gamble with, not so much if you don't.

[ducatilover]

http://cgi.ebay.co.uk/Brake-Disc-Full-Set-Honda-CBR400-RR-90-94-/250606579184?pt=UK_Motorcycle_Parts&hash=item3a5950edf0

$375 NZD seems fair to me.

[ducatilover]

i have a set of mc22 discs, $200, you buy it, i'll hold onto the $$ for 2 weeks if they dont fit, post em back and i'll give u ur moneys back
Just looked MC22 up, they seem to be 275mm?


Gamble basically sums it up... might be sweet, might not, but you won't know till you try them. Fine if you've got the money and time to gamble with, not so much if you don't.

I don't know many willing to throw that kind of coin away at random....

[ducatilover]

http://cgi.ebay.com/ebaymotors/Front-Brake-Disc-Rotor-Honda-CBR-400-900-600-VFR-RVF-G-/230530169297?pt=Motorcycles_Parts_Accessories&hash=item35acab39d1

Even better 190nzd plus postage