Smoking KTM

[xxblackbirdxx]

Hi,
i have a ktm exc 400 which started to smoke a fair bit from the exhaust at the last ride, i have oil coming out of the exhaust as well.:shit::facepalm:
Any ideas??
Is it time for a top end rebuild? or a complete one?
I bought it a few months back..so don't know much about it..
cheers

[Stylo]

Hi,
i have a ktm exc 400 which started to smoke a fair bit from the exhaust at the last ride, i have oil coming out of the exhaust as well.:shit::facepalm:
Any ideas??
Is it time for a top end rebuild? or a complete one?
I bought it a few months back..so don't know much about it..
cheers

What year is it and how many hours......?

I take it you've changed the oil a couple of times, washed the airfilter after every ride etc...?

[xxblackbirdxx]

What year is it and how many hours......?

I take it you've changed the oil a couple of times, washed the airfilter after every ride etc...?

its 2002 model. i have done 300kms since purchase and done one oil change with filters, also cleant the screens and airfilter was done thrice as thats how many times i have been out on the bike..cheers

[Taz]

Not running it on pre-mix are ya?

[D dub]

Hi,
i have a ktm exc 400 which started to smoke a fair bit from the exhaust at the last ride, i have oil coming out of the exhaust as well.:shit::facepalm:
Any ideas??
Is it time for a top end rebuild? or a complete one?
I bought it a few months back..so don't know much about it..
cheers

Go to KTMTALK.com There you will find all the info and help you could ever need.

[vazza]

Didn't know you were still around Vic!

Must go for a ride sometime!

[Rupe]

rings or valves I'd guess

[barty5]

The rings will be stuffed the breather pipe if its still starts will be pushing out a heap of air as well due to the compression leaking past the rings. time for a top end rebuild but would pay while apart to check bore etc is still in spec do the works to cover it all valve seals etc

[xxblackbirdxx]

Didn't know you were still around Vic!

Must go for a ride sometime!

Hey Vin,
let me get her fixed and will be out for a ride fairly soon..been too long
cheers

[xxblackbirdxx]

The rings will be stuffed the breather pipe if its still starts will be pushing out a heap of air as well due to the compression leaking past the rings. time for a top end rebuild but would pay while apart to check bore etc is still in spec do the works to cover it all valve seals etc

thanks barty5, looking at rebuilding the entire engine for some peace of mind.
struggling to find a con rod kit for it. have found a forged piston on ebay, but can't seem to find anyone with a con rod kit for her.
Motox parts does not have the piston , valves or the con rod kit...
does anyone know where i could secure the parts from for this model.
didn't know its going to be such a drama looking for parts...

I appreciate all the help and suggestions posted, thanks guys..:yes:

[xxblackbirdxx]

rings or valves I'd guess

Cheers rupe.:yes:

[barty5]

thanks barty5, looking at rebuilding the entire engine for some peace of mind.
struggling to find a con rod kit for it. have found a forged piston on ebay, but can't seem to find anyone with a con rod kit for her.
Motox parts does not have the piston , valves or the con rod kit...
does anyone know where i could secure the parts from for this model.
didn't know its going to be such a drama looking for parts...

I appreciate all the help and suggestions posted, thanks guys..:yes:


ill see what i can find with my suppliers get back to you shortly

[motor_mayhem]

didn't know its going to be such a drama looking for parts...


That was my reason for passing on that model, there was one on offer at the time I was looking and was a fair bit cheaper than the one I got (450EXC) while still being a decent bike.