FXR sprockets' availability in Auckland?

[Voltaire]

I had a search and found a ratio calculator for the FXR 150, mine is 14/47 and I'd like to experiment with a smaller front. Where in Auckland would I get a 13 and or what other bikes ones would fit....keen to take the bucket out on Saturday if its not raining...:innocent:
I have a 49 rear so might fit that too as 1 on the front is about the same as 3 on the back....:blink:

[Henk]

Any bike shop. I think I'm running a 12 but can't remember.

[Voltaire]

Any bike shop. I think I'm running a 12 but can't remember.

Cheers, I'll take it with me tomorrow and see what I can find.:yes:

[kel]

As Henk said 12 tooth JT front available from any bike shop (next day delivery). There are range of sprockets that will fit from memory mine was listed for a RM80, you will need a spacer behind the sprocket as its not as wide as original FXR issue i.e. same spline same pitch but needs to be spaced out from the engine case. The 49 tooth will be too tall for Mt Wellington, 12 front 47 rear is an excellent starting combination.
From memory the right front sprocket is a JTF1263 - 428 chain, but double check as I cant check mine at the moment. Link below will take you to these front sprockets
http://www.jtsprockets.com/52.0.html?&L=0&sel_uid=5902&p=

[RDjase]

I had a search and found a ratio calculator for the FXR 150, mine is 14/47 and I'd like to experiment with a smaller front. Where in Auckland would I get a 13 and or what other bikes ones would fit....keen to take the bucket out on Saturday if its not raining...:innocent:
I have a 49 rear so might fit that too as 1 on the front is about the same as 3 on the back....:blink:

Common sprocket, same as RG150 and Kwaka KR150, probably more too

We run a 12 one way at Roys Hill and 13 the other (cant remember which way, thats Tylers job) and a 15 with a TZ125 fairing at Manfeild and Taupo.

I will post the sprocket numbers when I get them out of the spares box. I think some a JT like Kel mentioned before

It had a 16 when we got it, was ready for Bonneville lol !

[TZ350]

Suzuki GP/TF/TS 100/125 fit the spline on fxr's as well as Honda CB/XL/SL 100/125's which also have a lock thing with two bolts, all are 428 chain from memory.