View Full Version : Christchurch - need a clamp
SMOKEU
24th January 2012, 14:41
I need a clamp as I want to fit a radar detector to my bike. There is a round 15mm diameter bar and I need a mild steel clamp which can clamp onto that round bar. The clamp needs to be quite strong as I will be welding a plate onto it to mount the radar detector. I went to Bunnings and Blacks fasteners and they don't sell anything like that. Where can I buy one?
bikaholic
24th January 2012, 15:56
How about a shaft collar with a grub screw, weld a plate on top of that?
SMOKEU
24th January 2012, 16:20
How about a shaft collar with a grub screw, weld a plate on top of that?
That would be good. I just don't know where to find one.
bikaholic
24th January 2012, 16:24
That would be good. I just don't know where to find one.Engineering supplier, blackwoods or similar, that sells pumps, motors or gearboxes.
Are you going to stick the detector in a klick klack box, bungied onto the plate for quick removal ?
SMOKEU
24th January 2012, 16:30
Engineering supplier, blackwoods or similar, that sells pumps, motors or gearboxes.
Are you going to stick the detector in a klick klack box, bungied onto the plate for quick removal ?
I don't know. I was thinking of somehow sticking it to the metal plate that will go on top of the clamp. I could weld some allen keys to the clamp for easy removal, or use thumb screws.
bikaholic
24th January 2012, 16:34
I don't know. I was thinking of somehow sticking it to the metal plate that will go on top of the clamp. I could weld some allen keys to the clamp for easy removal, or use thumb screws.Do you need someything waterproof for the detector?
SMOKEU
24th January 2012, 16:45
Do you need someything waterproof for the detector?
Not really. I don't ride fast in the rain and I don't plan on leaving the bike unattended with the radar detector mounted onto it anyway.
Grumph
24th January 2012, 16:48
I need a clamp as I want to fit a radar detector to my bike. There is a round 15mm diameter bar and I need a mild steel clamp which can clamp onto that round bar. The clamp needs to be quite strong as I will be welding a plate onto it to mount the radar detector. I went to Bunnings and Blacks fasteners and they don't sell anything like that. Where can I buy one?
What's the matter with a small U bolt ? Which you will find at Bunnings i think. Easy peasy to attatch a plate to it as well - just drill 2 holes and use the U bolt....Grubscrewed collars come loose too easily.
SMOKEU
24th January 2012, 17:00
What's the matter with a small U bolt ? Which you will find at Bunnings i think. Easy peasy to attatch a plate to it as well - just drill 2 holes and use the U bolt....Grubscrewed collars come loose too easily.
Like this? 255856
slofox
24th January 2012, 17:01
I use RAM mounts, meself...
SMOKEU
24th January 2012, 17:01
This here 255857 is exactly what I want.
Otherwise this here 255858 would be my second choice.
Just has to be mild steel so I can easily weld onto it.
Gremlin
24th January 2012, 17:02
I put a RAM ball mount on the bottom of a pelican case...
TrentNz
24th January 2012, 19:49
Get the missus to hold it in place while you tack it.
bogan
24th January 2012, 19:54
Just wedge the fucker inside your helmet, solve all the problems! How many threads you need to install one radar detector smokeu? :bleh:
SMOKEU
24th January 2012, 20:31
How many threads you need to install one radar detector smokeu? :bleh:
I think 5 is the magic number here.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.