vfr400 chain-adjusting tool wanted

[mini_me]

anyone? I need the c-spanner to adjust my chain
has anyone got one they are willing to sell?
chris

[Teflon]

anyone? I need the c-spanner to adjust my chain
has anyone got one they are willing to sell?
chris

I used a drift to adjust my chain.

[sAsLEX]

as KK would say " you dont need one of those you poof"


just a hammer and a piece of steel will do the trick

[Ixion]

as KK would say " you dont need one of those you poof"


just a hammer and a piece of steel will do the trick

Most essential item in the mechanics tool kit. A BLOODY BIG HAMMER

Most essential word in the mechanics vocabulary. Judicious.

Personally I just give the wheel a farking good kick in the right direction. Works for me.

[XTC]

Most essential item in the mechanics tool kit. A BLOODY BIG HAMMER

Most essential word in the mechanics vocabulary. Judicious.

Personally I just give the wheel a farking good kick in the right direction. Works for me.
Doesn't work with the single sided swingarms on the honda's. You need to turn the cam. VFR750 had a special tool in the tool kit.... Hitting with hammer and drift will work but is a bit cavemanish....
Mini-me....Have you priced one from a honda dealer??
Only 16.99 pounds sterling on ebay. (about $45) Try your dealer.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=10460&item=7986964998&rd=1&ssPageName=WDVW

[sAsLEX]

Hitting with hammer and drift will work but is a bit cavemanish....


orurrghhh argghhhh burgghrggg

[throws dirt]


urrrghhhh grrrrrrr

[XTC]

orurrghhh argghhhh burgghrggg

[throws dirt]


urrrghhhh grrrrrrr

XTC introduces caveboy sAsLEX to fire by inserting it in his orifice..... Get back in your cave.. :rofl:

[sAsLEX]

Only 16.99 pounds sterling on ebay. (about $45) Try your dealer.


ok so heres my idea, NC30s are the worlds favourite bike, well around these parts they are fairly common, and as can be seen from the pic the toll aint exactly complex

So if someone on here has one we could borrow it for an afternoon, take a template and make a few of our own from some steel or similar, expected costs are

Labour at 5 hours free
Borrowing someone elses tools free
Using free steel from work Free
useful tool for all priceless

[FROSTY]

ok so heres my idea, NC30s are the worlds favourite bike, well around these parts they are fairly common, and as can be seen from the pic the toll aint exactly complex

So if someone on here has one we could borrow it for an afternoon, take a template and make a few of our own from some steel or similar, expected costs are

Labour at 5 hours free
Borrowing someone elses tools free
Using free steel from work Free
useful tool for all priceless

Ill post my entry now then

[sAsLEX]

Ill post my entry now then

huh???.........

[XTC]

huh???.........
Yeah that's what I was thinking....... :spudwhat:

[tl_tub]

Could you just use a single point c-spanner? You can pick those up from the toolshed at a reasonable price.

[dss3]

ok so heres my idea, NC30s are the worlds favourite bike, well around these parts they are fairly common, and as can be seen from the pic the toll aint exactly complex

So if someone on here has one we could borrow it for an afternoon, take a template and make a few of our own from some steel or similar, expected costs are

Labour at 5 hours free
Borrowing someone elses tools free
Using free steel from work Free
useful tool for all priceless


Hey I need one of those too, if you can send me the spanner I will draw it at work and send the file off to the profile cutters to laser cut us a few sets out if you guys want??

[Ixion]

Doesn't work with the single sided swingarms on the honda's. You need to turn the cam. VFR750 had a special tool in the tool kit.... Hitting with hammer and drift will work but is a bit cavemanish....
Mini-me....Have you priced one from a honda dealer??
Only 16.99 pounds sterling on ebay. (about $45) Try your dealer.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=10460&item=7986964998&rd=1&ssPageName=WDVW
Meh, reckon y'just ain't kicking it HARD ENOUGH :devil2:

[sAsLEX]

Hey I need one of those too, if you can send me the spanner I will draw it at work and send the file off to the profile cutters to laser cut us a few sets out if you guys want??

good on you dude will try track one down, and if we all throw you some beer/race money you could make a few for the KB family