MASSIVE GSXR PARTS GARAGE SALE

[nicko]

Hi Guys,

Have had a big stocktake of the garage and got a heap of bits that are up for sale. Mostly from the K1-K3 GSXR 600 model but a lot of the parts will fit other model GSXR 600s/750s and 1000s. Some bits fit other Suzuki models too e.g. SV's. And not that you'd need them, coz GSXR's are so reliable, but there are a heap of engine bits there too. I've thrown on prices on most stuff but that's a starting point and will do deals if you get more than 1 bit. All funds will go towards the Nicko Racing Fund for the 05/06 season, please give generously when the collector calls. All bits are used unless otherwise stated.

Give me a PM if you need any more info or want a look at any of the bits, I'm in Pt Chev in Auckland.

Cheers,
Nicko




96-00 GSXR
1 x standard air filter $5
1 x carb float (600) $5
1 x hacked undertray for racing – rear half sawn off $25
1 x set air intake mesh covers $20
1 x indicator lens (black plastic broken) $5


K1-K3 GSXR 600
1 x dash unit good condition (<2000kms showing I think) $300
1 x dash case only (broken) $5 or free with complete dash

1 x rough set air intakes (broken but plastic welded together) $100
1 x left carbon fibre look air intake (mint but 1 tab missing) $75
1 x left air intake (mint) $100
1 x set air intake mesh covers $30
2 x left air intake mesh covers $15 each

1 x right indicator $25
1 x right indicator (broken black plastic – repaired) $15
1 x left indicator $25
(all dash/intakes/mesh/indicators also fit K1-K3 750 & K1/K2 1000)


2 x sets of F1 engineering clip-on adjustable bars (fits SV650’s & others) $100ea
1 x set genuine Suzuki clip-on bars (may fit SV650’s & others) $100

1 x fuel tank – metallic blue (fits all K1-K3 600’s/750’s & K1/K2 1000) $300
1 x filler cap (keyless open) (fits all 96-K5 GSXRs & other Suzuki models) $40
2 x filler caps with keys (fits all 96-K5 GSXRs & other Suzuki models) $50 each
1 x fuel pump (fits all K1-K3 600’s/750’s & K1/K2 1000) $75
2 x tank hinges (fits all K1-K3 600’s/750’s & K1/K2 1000) $40
1 x complete rear seat release mechanism with key (fits all K1-K5 GSXRs) $40
1 x set metallic blue race fairings incl. mudguard, upper, bellypan, rear cowl $500 (fits all K1-K3 600’s/750’s & K1/K2 1000 with small mod)
1 x blue race rear-undertray $75 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x black race rear-undertray $75 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x front mudguard – black $100 (fits all K1-K3 600’s/750’s & K1/K2 1000)
2 x genuine screens $100 each (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x original front subframe (also fits 750/1000) $150 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x F1 engineering race front subframe $125 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x front rim (machined from 98 GSXR 600 rim, now fits K1-K5 GSXRs. Incl. bearings/no discs) $250

1 x complete headlight $250 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x brakelight $60 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x riders seat $100 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x complete set road fairings black/yellow. $750
Some gravel rash on right side but all in 1 piece. Incl pillion seat cover.

3 x Brake Pads 50% left $40 each complete set EBC/Tokico
2 x Brake Pads 75% left $60 each complete set EBC/Tokico
1 x Brake Pads 95% left $50 – 2 pads only – Yoshimura

1 x Yoshimura EMS ($500 incl. all accessories *)
1 x Yoshimura 4 hub EMS connector*
1 x Yoshimura shift light with carbon fibre bracket*
1 x Yoshimura 3 way map selector switch*
1 x Yoshimura clutchless shifter kit*
1 x Yoshimura gear position offset kit*
1 x Yoshimura EMS extension cable*
1 x Yoshimura laptop connecting cable*
1 x Yoshimura ECU – race computer $300
1 x Yoshimura Full Titanium Exhaust (small damage to base of can – otherwise good cond) (also fits K4/K5 600’s) $1250



K1-K3 600 Engine Bits
(some bits may fit other K1-K5 GSXR/Suzuki models)
Complete Gear Shift System including gear shift shaft/cam/forks
Complete transmission $250

3 x pistons (1 good, 1 average valve damage, 1 bad valve damage – all with conrods)
4 x conrod bolts NEW SGP# 12163-35F00

1 x Head – broken valve, valve seat damage, damage in 1 tappet sleeve
1 x Head – broken valve guides, damage to tappet sleeves

10 x head bolts
12 x other major engine bolts

13 x exhaust valves
15 x inlet valves
31 x valve springs
13 x inlet Tappets
13 x exhaust tappets
47 x retainers
Fuel injection to head manifolds (intake pipes)
2 x engine coolant temperature sensors
2 x Thermostats
2 x Thermostat covers

1 x Fuel injection rack $200
3 x pair control valves

1 x rocker cover $80
1 x rocker cover gasket
1 x set of cams incl. cam sprockets $150
1 x set of cam sprockets
1 x set of cam chain guides
1 x cam position sensor
1 x cam chain tensioner
1 x cam chain


1 x clutch pressure plate unit
3 x clutch drive plates
1 x clutch driven plate
4 x clutch springs
1 x starter motor $80
1 x starter idle gears
1 x oil pickup (strainer)
2 x oil pressure switches NEW SGP#3782033010 (fits all K1-K5 GSXRs)

1 x damaged crank – thrust bearings & journal bearings
1 x flywheel (fits all K1-K5 GSXR 600s)

1 x crank breather case
1 x oil cooler
1 x alternator casing NEW SGP#1135135102 $125
1 x alternator casing – damaged, needs weld/knead it applied
1 x starter clutch cover NEW SFP#1138135F00 $100
1 x clutch cover $80
1 x oil filler plug (fits all K1-K5 GSXRs)
1 x water inlet cover (fits all K1-K5 GSXRs)
1 x water reservoir (lugs broken) (fits all K1-K5 GSXRs)
Most water hoses
Various gaskets
1 x fuel tank coupling pipe (fuel injection end broken) (fits all K1-K3 GSXRs)
1 x kickstand switch (no connecting plug) (fits all K1-K5 GSXRs)


K4-K5 GSXR 600
4 x Brake Pads 50% left $40 each complete set Tokico/Vesrah (also fits K4 1000)


Other
Scitsu Rev counter – connects to HT lead of bike/kart. Complete with bracket & space for temp gauge $100
1 x RG150 CDI $50
1 x set of black mirrors (will fit 91-97 Ducati Supersports) $5
1 x Large Yellow/Black Dainese Leather Jacket – as new $500

[Quasievil]

Cool list there mate, nothing much for my little 400 though.

Will have a closer look later, didnt get the chance to reply to your email sorry, all is good though just need to refine a few things for the season F3 races.
Catch you later

[White trash]

Nahhhh, you've got fuck all bro!

Sorry I missed your ride on Sunday, I rode past Shell Greenlane too and saw no one except Vladi.

[Motoracer]

Holly shite!! Looks like it's time to go shopping!

Will be in contact with you very shortly Nick!

[dss3]

might have been quicker to list what ya don't have man!

[Two Smoker]

Bugger i dont have a K3 600...

[JohnBoy]

NONONONONONONONONO!!!! too many options.... Sooo little money!!!

*forces Visa back into wallet*

[Coyote]

Would that Yoshimura pipe suit my CBR by any chance?... I would be so lucky

[nicko]

might have been quicker to list what ya don't have man!

Ha ha, the list was even longer before MR started crashing....opps I mean racing a GSXR! ;)



Would that Yoshimura pipe suit my CBR by any chance?... I would be so lucky

Err, doubt it but can measure the headers if you like.

[Motoracer]

Ha ha, the list was even longer before MR started crashing....opps I mean racing a GSXR!

Making fun of your best customer is not cool. Errr.... best customer as in the most frequently visiting but not best as in large spending...... Anywho, more to the point, that's not good enough customer service mate. If you don't watch it, I'll take my business elsewhere! :motu:

[Two Smoker]

Actually Nicko, I am keen on that Yoshi system... Will send you a text tonight or tomorrow...

[nicko]

List updated as a few items have gone...


Hi Guys,

Have had a big stocktake of the garage and got a heap of bits that are up for sale. Mostly from the K1-K3 GSXR 600 model but a lot of the parts will fit other model GSXR 600s/750s and 1000s. Some bits fit other Suzuki models too e.g. SV's. And not that you'd need them, coz GSXR's are so reliable, but there are a heap of engine bits there too. I've thrown on prices on most stuff but that's a starting point and will do deals if you get more than 1 bit. All funds will go towards the Nicko Racing Fund for the 05/06 season, please give generously when the collector calls. All bits are used unless otherwise stated.

Give me a PM if you need any more info or want a look at any of the bits, I'm in Pt Chev in Auckland.

Cheers,
Nicko




96-00 GSXR
1 x standard air filter $5
1 x carb float (600) $5
1 x hacked undertray for racing – rear half sawn off $25
1 x set air intake mesh covers $20
1 x indicator lens (black plastic broken) $5


K1-K3 GSXR 600
1 x dash unit good condition (<2000kms showing I think) $300
1 x dash case only (broken) $5 or free with complete dash

1 x rough set air intakes (broken but plastic welded together) $100 - LEFT SOLD
1 x left carbon fibre look air intake (mint but 1 tab missing) $75
1 x left air intake (mint) $100 SOLD
1 x set air intake mesh covers $30
2 x left air intake mesh covers $15 each

1 x right indicator $25 SOLD
1 x right indicator (broken black plastic – repaired) $15
1 x left indicator $25 SOLD
(all dash/intakes/mesh/indicators also fit K1-K3 750 & K1/K2 1000)


2 x sets of F1 engineering clip-on adjustable bars (fits SV650’s & others) $100ea
1 x set genuine Suzuki clip-on bars (may fit SV650’s & others) $100 SOLD

1 x fuel tank – metallic blue (fits all K1-K3 600’s/750’s & K1/K2 1000) $300
1 x filler cap (keyless open) (fits all 96-K5 GSXRs & other Suzuki models) $40
2 x filler caps with keys (fits all 96-K5 GSXRs & other Suzuki models) $50 each
1 x fuel pump (fits all K1-K3 600’s/750’s & K1/K2 1000) $75 SOLD
2 x tank hinges (fits all K1-K3 600’s/750’s & K1/K2 1000) $40
1 x complete rear seat release mechanism with key (fits all K1-K5 GSXRs) $40
1 x set metallic blue race fairings incl. mudguard, upper, bellypan, rear cowl $500 (fits all K1-K3 600’s/750’s & K1/K2 1000 with small mod)
1 x blue race rear-undertray $75 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x black race rear-undertray $75 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x front mudguard – black $100 (fits all K1-K3 600’s/750’s & K1/K2 1000)
2 x genuine screens $100 each (fits all K1-K3 600’s/750’s & K1/K2 1000) 1 SOLD - 1 LEFT
1 x original front subframe (also fits 750/1000) $150 (fits all K1-K3 600’s/750’s & K1/K2 1000) SOLD
1 x F1 engineering race front subframe $125 (fits all K1-K3 600’s/750’s & K1/K2 1000) SOLD
1 x front rim (machined from 98 GSXR 600 rim, now fits K1-K5 GSXRs. Incl. bearings/no discs) $250 SOLD

1 x complete headlight $250 (fits all K1-K3 600’s/750’s & K1/K2 1000) SOLD
1 x brakelight $60 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x riders seat $100 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x complete set road fairings black/yellow. $750
Some gravel rash on right side but all in 1 piece. Incl pillion seat cover.

3 x Brake Pads 50% left $40 each complete set EBC/Tokico 2 SOLD 1 LEFT
2 x Brake Pads 75% left $60 each complete set EBC/Tokico
1 x Brake Pads 95% left $50 – 2 pads only – Yoshimura

1 x Yoshimura EMS ($500 incl. all accessories *)
1 x Yoshimura 4 hub EMS connector*
1 x Yoshimura shift light with carbon fibre bracket*
1 x Yoshimura 3 way map selector switch*
1 x Yoshimura clutchless shifter kit*
1 x Yoshimura gear position offset kit*
1 x Yoshimura EMS extension cable*
1 x Yoshimura laptop connecting cable*
1 x Yoshimura ECU – race computer $300
1 x Yoshimura Full Titanium Exhaust (small damage to base of can – otherwise good cond) (also fits K4/K5 600’s) $1250 NEARLY SOLD



K1-K3 600 Engine Bits
(some bits may fit other K1-K5 GSXR/Suzuki models)
Complete Gear Shift System including gear shift shaft/cam/forks
Complete transmission $250

3 x pistons (1 good, 1 average valve damage, 1 bad valve damage – all with conrods)
4 x conrod bolts NEW SGP# 12163-35F00 SOLD

1 x Head – broken valve, valve seat damage, damage in 1 tappet sleeve
1 x Head – broken valve guides, damage to tappet sleeves

10 x head bolts
12 x other major engine bolts

13 x exhaust valves, 15 x inlet valves, 31 x valve springs, 13 x inlet Tappets, 13 x exhaust tappets, 47 x retainers, Fuel injection to head manifolds (intake pipes), 2 x engine coolant temperature sensors, 2 x Thermostats, 2 x Thermostat covers

1 x Fuel injection rack $200
3 x pair control valves

1 x rocker cover, 1 x rocker cover gasket, 1 x set of cams incl. cam sprockets, 1 x set of cam sprockets, 1 x set of cam chain guides, 1 x cam position sensor, 1 x cam chain tensioner, 1 x cam chain


1 x clutch pressure plate unit SOLD
3 x clutch drive plates, 1 x clutch driven plate, 4 x clutch springs
1 x starter motor $80, 1 x starter idle gears, 1 x oil pickup (strainer)
2 x oil pressure switches NEW SGP#3782033010 (fits all K1-K5 GSXRs)

1 x damaged crank – thrust bearings & journal bearings
1 x flywheel (fits all K1-K5 GSXR 600s)

1 x crank breather case
1 x oil cooler
1 x alternator casing NEW SGP#1135135102 $125
1 x alternator casing – damaged, needs weld/knead it applied
1 x starter clutch cover NEW SFP#1138135F00 $100
1 x clutch cover $80
1 x oil filler plug (fits all K1-K5 GSXRs)
1 x water inlet cover (fits all K1-K5 GSXRs)
1 x water reservoir (lugs broken) (fits all K1-K5 GSXRs)
Most water hoses
Various gaskets
1 x fuel tank coupling pipe (fuel injection end broken) (fits all K1-K3 GSXRs)
1 x kickstand switch (no connecting plug) (fits all K1-K5 GSXRs)


K4-K5 GSXR 600
4 x Brake Pads 50% left $40 each complete set Tokico/Vesrah (also fits K4 1000)


Other
Scitsu Rev counter – connects to HT lead of bike/kart. Complete with bracket & space for temp gauge $100
1 x RG150 CDI $50
1 x set of black mirrors (will fit 91-97 Ducati Supersports) $5
1 x Large Yellow/Black Dainese Leather Jacket – as new $500

[Two Smoker]

List updated as a few items have gone...

Ill come see you next week about the almost sold thing :niceone:

[Kornholio]

NONONONONONONONONO!!!! too many options.... Sooo little money!!!

*forces Visa back into wallet*

Yup dammit Im in the same boat as you buddy :stoogie:

[manny58200]

Hi Guys,

Have had a big stocktake of the garage and got a heap of bits that are up for sale. Mostly from the K1-K3 GSXR 600 model but a lot of the parts will fit other model GSXR 600s/750s and 1000s. Some bits fit other Suzuki models too e.g. SV's. And not that you'd need them, coz GSXR's are so reliable, but there are a heap of engine bits there too. I've thrown on prices on most stuff but that's a starting point and will do deals if you get more than 1 bit. All funds will go towards the Nicko Racing Fund for the 05/06 season, please give generously when the collector calls. All bits are used unless otherwise stated.

Give me a PM if you need any more info or want a look at any of the bits, I'm in Pt Chev in Auckland.

Cheers,
Nicko




96-00 GSXR
1 x standard air filter $5
1 x carb float (600) $5
1 x hacked undertray for racing – rear half sawn off $25
1 x set air intake mesh covers $20
1 x indicator lens (black plastic broken) $5


K1-K3 GSXR 600
1 x dash unit good condition (<2000kms showing I think) $300
1 x dash case only (broken) $5 or free with complete dash

1 x rough set air intakes (broken but plastic welded together) $100
1 x left carbon fibre look air intake (mint but 1 tab missing) $75
1 x left air intake (mint) $100
1 x set air intake mesh covers $30
2 x left air intake mesh covers $15 each

1 x right indicator $25
1 x right indicator (broken black plastic – repaired) $15
1 x left indicator $25
(all dash/intakes/mesh/indicators also fit K1-K3 750 & K1/K2 1000)


2 x sets of F1 engineering clip-on adjustable bars (fits SV650’s & others) $100ea
1 x set genuine Suzuki clip-on bars (may fit SV650’s & others) $100

1 x fuel tank – metallic blue (fits all K1-K3 600’s/750’s & K1/K2 1000) $300
1 x filler cap (keyless open) (fits all 96-K5 GSXRs & other Suzuki models) $40
2 x filler caps with keys (fits all 96-K5 GSXRs & other Suzuki models) $50 each
1 x fuel pump (fits all K1-K3 600’s/750’s & K1/K2 1000) $75
2 x tank hinges (fits all K1-K3 600’s/750’s & K1/K2 1000) $40
1 x complete rear seat release mechanism with key (fits all K1-K5 GSXRs) $40
1 x set metallic blue race fairings incl. mudguard, upper, bellypan, rear cowl $500 (fits all K1-K3 600’s/750’s & K1/K2 1000 with small mod)
1 x blue race rear-undertray $75 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x black race rear-undertray $75 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x front mudguard – black $100 (fits all K1-K3 600’s/750’s & K1/K2 1000)
2 x genuine screens $100 each (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x original front subframe (also fits 750/1000) $150 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x F1 engineering race front subframe $125 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x front rim (machined from 98 GSXR 600 rim, now fits K1-K5 GSXRs. Incl. bearings/no discs) $250

1 x complete headlight $250 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x brakelight $60 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x riders seat $100 (fits all K1-K3 600’s/750’s & K1/K2 1000)
1 x complete set road fairings black/yellow. $750
Some gravel rash on right side but all in 1 piece. Incl pillion seat cover.

3 x Brake Pads 50% left $40 each complete set EBC/Tokico
2 x Brake Pads 75% left $60 each complete set EBC/Tokico
1 x Brake Pads 95% left $50 – 2 pads only – Yoshimura

1 x Yoshimura EMS ($500 incl. all accessories *)
1 x Yoshimura 4 hub EMS connector*
1 x Yoshimura shift light with carbon fibre bracket*
1 x Yoshimura 3 way map selector switch*
1 x Yoshimura clutchless shifter kit*
1 x Yoshimura gear position offset kit*
1 x Yoshimura EMS extension cable*
1 x Yoshimura laptop connecting cable*
1 x Yoshimura ECU – race computer $300
1 x Yoshimura Full Titanium Exhaust (small damage to base of can – otherwise good cond) (also fits K4/K5 600’s) $1250



K1-K3 600 Engine Bits
(some bits may fit other K1-K5 GSXR/Suzuki models)
Complete Gear Shift System including gear shift shaft/cam/forks
Complete transmission $250

3 x pistons (1 good, 1 average valve damage, 1 bad valve damage – all with conrods)
4 x conrod bolts NEW SGP# 12163-35F00

1 x Head – broken valve, valve seat damage, damage in 1 tappet sleeve
1 x Head – broken valve guides, damage to tappet sleeves

10 x head bolts
12 x other major engine bolts

13 x exhaust valves
15 x inlet valves
31 x valve springs
13 x inlet Tappets
13 x exhaust tappets
47 x retainers
Fuel injection to head manifolds (intake pipes)
2 x engine coolant temperature sensors
2 x Thermostats
2 x Thermostat covers

1 x Fuel injection rack $200
3 x pair control valves

1 x rocker cover $80
1 x rocker cover gasket
1 x set of cams incl. cam sprockets $150
1 x set of cam sprockets
1 x set of cam chain guides
1 x cam position sensor
1 x cam chain tensioner
1 x cam chain


1 x clutch pressure plate unit
3 x clutch drive plates
1 x clutch driven plate
4 x clutch springs
1 x starter motor $80
1 x starter idle gears
1 x oil pickup (strainer)
2 x oil pressure switches NEW SGP#3782033010 (fits all K1-K5 GSXRs)

1 x damaged crank – thrust bearings & journal bearings
1 x flywheel (fits all K1-K5 GSXR 600s)

1 x crank breather case
1 x oil cooler
1 x alternator casing NEW SGP#1135135102 $125
1 x alternator casing – damaged, needs weld/knead it applied
1 x starter clutch cover NEW SFP#1138135F00 $100
1 x clutch cover $80
1 x oil filler plug (fits all K1-K5 GSXRs)
1 x water inlet cover (fits all K1-K5 GSXRs)
1 x water reservoir (lugs broken) (fits all K1-K5 GSXRs)
Most water hoses
Various gaskets
1 x fuel tank coupling pipe (fuel injection end broken) (fits all K1-K3 GSXRs)
1 x kickstand switch (no connecting plug) (fits all K1-K5 GSXRs)


K4-K5 GSXR 600
4 x Brake Pads 50% left $40 each complete set Tokico/Vesrah (also fits K4 1000)


Other
Scitsu Rev counter – connects to HT lead of bike/kart. Complete with bracket & space for temp gauge $100
1 x RG150 CDI $50
1 x set of black mirrors (will fit 91-97 Ducati Supersports) $5
1 x Large Yellow/Black Dainese Leather Jacket – as new $500

Hi I wanted to know if you will sell me the yoshimura clutchless shifter kit and the gear position offset kit. Thanks email me at mroque20002003@yahoo.com

[manny58200]

Hi I wanted to know if you will sell me the yoshimura clutchless shifter kit and the gear position offset kit. Thanks email me at mroque20002003@yahoo.com

[Patch]

Hi I wanted to know if you will sell me the yoshimura clutchless shifter kit and the gear position offset kit. Thanks email me at mroque20002003@yahoo.com
After 3 years (almost) of listing items for sale - probably not

[manny58200]

Patch, do you know anyone with the yoshimura clutchless shifter who wants to sell it or a store that sells it I've looked everywhere.

[Brett]

I think that the quick shift kits have been discontinued.

[manny58200]

Hey can someone pm Ncko for me about the yoshimura clutchless shiter and the map offset. I just wanted to know if he still had it and wanted to sell it to me. I haven't been a member long enough to do it myself. Thanks Manny58200 email mroque20002003@yahoo.com

[Louie]

Do you have any Crash knobs ? you know the bungs in the end of the handlebars. I live in Mt Albert

[jjwalker2]

Oh please tell me you still have the gear position sensor and clutchless shifter. I have been looking everywhere for those. I do have a K1, and an old yosh catalog, I can check the part numbers to see if they will work.

[White trash]

Oh please tell me you still have the gear position sensor and clutchless shifter. I have been looking everywhere for those. I do have a K1, and an old yosh catalog, I can check the part numbers to see if they will work.
Bro, considering Mr O listed this stuff in 2005 and is currently residing in Europe banging away at chicks with hairy armpits and moustaches, I fear you may be shit outta luck.

However, stranger things have happened, so you may be pleasantly surprised.

[2010gsxr]

hi mate would like mesh covers can you ring me on021817661 gareth thanks live grey lynn

[Mental Trousers]

You're farken joking?? This thread is 5 years old.

[onearmedbandit]

Which is one year older than my daughter Sophia, and even she would know this thread is well past it's use by.

[2010gsxr]

hi am keen on srad mesh intakes live close could you ring gareth on 021817661 cheers mate

[Matt Bleck]

hi am keen on srad mesh intakes live close could you ring gareth on 021817661 cheers mate

Reading and maths are not your strong points are they....................

[Virago]

hi am keen on srad mesh intakes live close could you ring gareth on 021817661 cheers mate

Dude...

The advert you have dug up is five years old. Would you dig out a five year old newspaper and start phoning classified advertisers...?

The person you are trying to contact has been in London for a while now - I don't think that you "live close". I somehow doubt that he'll be phoning you to explain this to you in person...