Log in

View Full Version : How compatible are Honda GB400 and GB500 engine and kick-starter unit?



pkmcneil
28th June 2012, 17:08
Hi, I'm looking for a new kick starter gear unit for my Honda GB400. I've located a GB500 unit in the States. Does ANYONE know if they are compatible?

This is a link to Mr Motorcycles in the States showing the GB500 spindle, gear etc
http://www.mrcycles.com/fiche_section_detail.asp?section=2126816&category=Motorcycles&make=HONDA&year=1989&fveh=124746

I have a GB500 PDF service manual but can't find any info of the GB400 kick-starter unit.
Cheers
Preston

jellywrestler
30th June 2012, 10:22
PINION, ONLY KICK (36T) (Honda Code 2488807)
This Honda 28211-ML6-770 PINION (36T) is also used on these models and components:

1987 XL600R A KICK STARTER
1987 XL600R AC KICK STARTER
1989 GB500 A KICK STARTER SPINDLE
1989 GB500 AC KICK STARTER SPINDLE
1990 GB500 A KICK STARTER SPINDLE
1990 GB500 AC KICK STARTER SPINDLE
1991 XR600R A KICK STARTER SPINDLE
1992 XR600R A KICK STARTER SPINDLE
1993 XR600R A KICK STARTER SPINDLE
1994 XR600R A KICK STARTER SPINDLE
1995 XR600R A KICK STARTER SPINDLE
1996 XR600R A KICK STARTER SPINDLE
1997 XR600R A KICK STARTER SPINDLE
1998 XR600R A KICK STARTER SPINDLE
1998 XR600R AC KICK STARTER SPINDLE
1999 XR600R A KICK STARTER SPINDLE
1999 XR600R AC KICK STARTER SPINDLE
2000 XR600R A KICK STARTER SPINDLE
2000 XR600R AC KICK STARTER SPINDLE

simple google part number, although this might well only include the american market bikes so doesn't mena it wont fit the 400.
Best bet, try local Econohonda, get one through them that's their specialty

Silage
3rd July 2012, 15:59
Hi PKMc
I owned a GB400 for years (now sold) but remember noting how many differences there were between the 400 and 500. The 500 is not a bored out 400. However, this doesn't mean the kickstarts are different.

I assume you are aware that the GBs were only sold in Japan and here under that label and dress. Honda marketed a butchered version elsewhere as the XBR400 and (probably) 500. I assume if you can source parts from the US they are for the XBR?
Cheers
Alan

Murray
3rd July 2012, 16:37
Like above - RING Econohonda they know everything and will certainly help out

Renegade
3rd July 2012, 18:37
Like above - RING Econohonda they know everything and will certainly help out

+1 bought many a part for my GB400 when i owned it.