2006 Hornet 250 brake rotor?

[speeding_ant]

Hi!

Does anyone know of an aftermarket source for front rotors for a Hornet 250 (2006)? I've heard they have an unusual mount pattern due to the 16" rim.

I know how expensive genuine parts are...

Cheers!

[actungbaby]

Hi!

Does anyone know of an aftermarket source for front rotors for a Hornet 250 (2006)? I've heard they have an unusual mount pattern due to the 16" rim.

I know how expensive genuine parts are...

Cheers!

if you do serach on ebay i know theres few rotor brands on there look well made, i brought second hand ones for my honda

so are you rotors warped or worn out

[nzspokes]

I think i have one, pm me so i remember to look tonight.

[speeding_ant]

if you do serach on ebay i know theres few rotor brands on there look well made, i brought second hand ones for my honda

so are you rotors warped or worn out

I believe they are warped. I tried loosening up the bobbins (rivets) on the floating rotor, and there is definitely movement. I'm getting pulsing at high / low speed...

[imdying]

Get yourself on eBay... I'm pretty sure you can get yourself some poorly made from shite metal ones out of China.

[speeding_ant]

Get yourself on eBay... I'm pretty sure you can get yourself some poorly made from shite metal ones out of China.

I'd rather not... I like the ability to stop ;)

[imdying]

How many kms has your baby got on it?

The 250 Hornet was famous for wearing the same size rubber as the 900, perhaps the discs are similar?

[gijoe1313]

On trademe there are bike wreckers parting out 250 hornet parts, you can give it a quick squizz!

[speeding_ant]

How many kms has your baby got on it?

The 250 Hornet was famous for wearing the same size rubber as the 900, perhaps the discs are similar?

28k, Jap import though so could be more.

Unfortunately the wheel on the 250 is 16" instead of 17", cheers for the thought though.

[speeding_ant]

On trademe there are bike wreckers parting out 250 hornet parts, you can give it a quick squizz!

Would rather buy new, wreckers are asking $150+ for half worn rotor :(

I've been forwarded onto these guys, they deliver to NZ apparently. http://metalgear.com.au/

Any knowledge on how good they are?

[imdying]

28k, Jap import though so could be more.

Unfortunately the wheel on the 250 is 16" instead of 17", cheers for the thought though.Early Fireblades had a 16" front wheel if it helps.

If it were mine, I'd just buy more OEM discs and continue on my merry way :) Have to wonder how they wore that one out in 28,000 kms though... I'm guessing it's been wound back.

[speeding_ant]

Early Fireblades had a 16" front wheel if it helps.

If it were mine, I'd just buy more OEM discs and continue on my merry way :) Have to wonder how they wore that one out in 28,000 kms though... I'm guessing it's been wound back.

Not worn, just warped or the bobbins/rivets are too stiff. It was kept outside for most of its life, that would have caused some issue there.

It was imported into NZ in 2007 @ 1500kms, has been tracked via WOF at 15km/day from then on. I'm presuming it's relatively accurate.

[nzmikey]

Would rather buy new, wreckers are asking $150+ for half worn rotor :(

I've been forwarded onto these guys, they deliver to NZ apparently. http://metalgear.com.au/

Any knowledge on how good they are?



Yeah but they WONT SHIP TO NZ !!
So if you have a mate in Oz who can have it sent to them & then they can send it to you .

[imdying]

Not worn, just warped or the bobbins/rivets are too stiff. It was kept outside for most of its life, that would have caused some issue there.

It was imported into NZ in 2007 @ 1500kms, has been tracked via WOF at 15km/day from then on. I'm presuming it's relatively accurate.

I meant before it arrived fwiw. Have you jammed a DTI on it to see what the real deal is? Or has it been doing it a while (i.e. long enough to wear a high point). Also worth mic'in it at half a dozen points.

Whites are the importers of MetalGear IIRC; you should be able to get them anywhere in NZ. I've one on the back of my RGV, but I've not run them on the front (running EBC Prolites fwiw).

[nzmikey]

I meant before it arrived fwiw. Have you jammed a DTI on it to see what the real deal is? Or has it been doing it a while (i.e. long enough to wear a high point). Also worth mic'in it at half a dozen points.

Whites are the importers of MetalGear IIRC; you should be able to get them anywhere in NZ. I've one on the back of my RGV, but I've not run them on the front (running EBC Prolites fwiw).



When I had my 96 Hornet 250 "Bits for Bikes" wanted $400+gst for a SINGLE front disc from MG ......

Try EBAY & use the specs from MG to help you with fitment etc

[imdying]

When I had my 96 Hornet 250 "Bits for Bikes" wanted $400+gst for a SINGLE front disc from MG ......

Try EBAY & use the specs from MG to help you with fitment etcAie aie aieee.... that's a bit salty.


Can you confirm:

Measurements (mm)
Outside Diameter 296
Inside Diameter 58
Bolt Hole Circumference 75
Bolt Hole Quantity 6
Bolt Hole Size 8.5
Thickness 4.5
Minimum Thickness 4.0
Offset 17.5
Type of Bolt Holes STRAIGHT

[nzmikey]

Aie aie aieee.... that's a bit salty.


Can you confirm:

Measurements (mm)
Outside Diameter 296
Inside Diameter 58
Bolt Hole Circumference 75
Bolt Hole Quantity 6
Bolt Hole Size 8.5
Thickness 4.5
Minimum Thickness 4.0
Offset 17.5
Type of Bolt Holes STRAIGHT

Now ? no I cant .... I sold it ... I now have a Gixxer ..... but as I said ... check MG ...... http://metalgear.com.au/mgear-brake-disc-front-gold-centre-p-6821.html

[nzmikey]

Aie aie aieee.... that's a bit salty.


Can you confirm:

Measurements (mm)
Outside Diameter 296
Inside Diameter 58
Bolt Hole Circumference 75
Bolt Hole Quantity 6
Bolt Hole Size 8.5
Thickness 4.5
Minimum Thickness 4.0
Offset 17.5
Type of Bolt Holes STRAIGHT



Here is the link to the thread I started in 2011 .... http://www.kiwibiker.co.nz/forums/showthread.php/144052-Fecking-markups

It kinda turned into a shit fight . :facepalm: