tobbera
18th November 2013, 22:18
Some of you might already have seen my thread (http://www.kiwibiker.co.nz/forums/showthread.php/161628-KTM-Duke-200-immobiliser-and-alarm) about developing an alarm system for the new range of Dukes. It has come to the point where it is perfectly usable but need more in real life testing and evaluation. I use my bike everyday, but I don't feel it is enough testing, and I want opinions from other owners.
So I'm reaching out to all you owners of newer model Dukes out there that want to try out an alarm system for their bike. I have material to build ten of this first version, two is already going to Duke owners in India.
The system is plug and play. This is not a universal system that needs wire splitting etc etc.
The system has an inbuilt software filtered vibration sensor. It sets off the alarm in three individual stages.
First, fast flashing with indicators (Scare off too curious people that is touching your bike).
Second, fast flashing with indicators and horn sound (Scare off the curious people that didn't get the first hint).
Third, extensive flashing with indicator and sounding the horn (Gathering attention to your bike and the person that is tampering with it).
The system arms itself 30 seconds after the ignition has been turned off and the bike stopped moving totally.
Its no problem to turn off the ignition and fuel up etc without setting off the alarm.
When the ingestion is turned on, the alarm is disarmed.
When the system is disarming the dash indicator is showing you if there has been any alarms going off while you have been gone.
When alarm is armed, the dash indicator is flashing with a certain interval.
Whats in it for you?
An alarm system for your bike for the cost of only the components alone.
http://s9.postimg.org/orfgoe23z/DSC01529.jpg (http://postimage.org/)
http://s9.postimg.org/it68rw8j3/DSC01561.jpg (http://postimage.org/)
http://s9.postimg.org/w8oo3lrn3/DSC01562.jpg (http://postimage.org/)
http://s16.postimg.org/h30hoz1ud/DSC01515.jpg
http://s16.postimg.org/pg66jn11x/DSC01505.jpg
Don't miss out!
Regards
Tobias
So I'm reaching out to all you owners of newer model Dukes out there that want to try out an alarm system for their bike. I have material to build ten of this first version, two is already going to Duke owners in India.
The system is plug and play. This is not a universal system that needs wire splitting etc etc.
The system has an inbuilt software filtered vibration sensor. It sets off the alarm in three individual stages.
First, fast flashing with indicators (Scare off too curious people that is touching your bike).
Second, fast flashing with indicators and horn sound (Scare off the curious people that didn't get the first hint).
Third, extensive flashing with indicator and sounding the horn (Gathering attention to your bike and the person that is tampering with it).
The system arms itself 30 seconds after the ignition has been turned off and the bike stopped moving totally.
Its no problem to turn off the ignition and fuel up etc without setting off the alarm.
When the ingestion is turned on, the alarm is disarmed.
When the system is disarming the dash indicator is showing you if there has been any alarms going off while you have been gone.
When alarm is armed, the dash indicator is flashing with a certain interval.
Whats in it for you?
An alarm system for your bike for the cost of only the components alone.
http://s9.postimg.org/orfgoe23z/DSC01529.jpg (http://postimage.org/)
http://s9.postimg.org/it68rw8j3/DSC01561.jpg (http://postimage.org/)
http://s9.postimg.org/w8oo3lrn3/DSC01562.jpg (http://postimage.org/)
http://s16.postimg.org/h30hoz1ud/DSC01515.jpg
http://s16.postimg.org/pg66jn11x/DSC01505.jpg
Don't miss out!
Regards
Tobias