Cbx1000r

[dangerous]

so... heres what Id do, slip the 1000/6 into the R and match the CBX faring to R colours... or fit the tail section of the R to the thour and colour match the X fairing to the R, then sell on the CBX1100 as Id keep the CB1000R :facepalm:

http://www.trademe.co.nz/Browse/Listing.aspx?id=740500153
http://www.trademe.co.nz/Browse/Listing.aspx?id=741167933

end result... 297964

only I'd fit the pipe masters to it... <iframe width="420" height="315" src="//www.youtube.com/embed/KG8oNz5oyQ8" frameborder="0" allowfullscreen></iframe>

[Katman]

What an absolute waste.

[AllanB]

Nice plan.:banana:

[nzspokes]

so... heres what Id do, slip the 1000/6 into the R and match the CBX faring to R colours... or fit the tail section of the R to the thour and colour match the X fairing to the R, then sell on the CBX1100 as Id keep the CB1000R :facepalm:

http://www.trademe.co.nz/Browse/Listing.aspx?id=740500153
http://www.trademe.co.nz/Browse/Listing.aspx?id=741167933

end result...

only I'd fit the pipe masters to it...

Do it. Do it. Do it.

[Katman]

Why would anyone take an iconic bike and turn it into a basket case?

[dangerous]

Why would anyone take an iconic bike and turn it into a basket case?just to fuck you off...

[Katman]

just to fuck you off...

What a winner.

[dangerous]

What a winner.

ohhh mate.. ya just gona hate what this guys gone n done then, FFS hes put a race number on it, fucks he thinking... <iframe width="560" height="315" src="//www.youtube.com/embed/fGyaV0BqYS8" frameborder="0" allowfullscreen></iframe>

[R650R]

Ya wanna do it properly.
Get a machine shop to cut the crank and block so you lose two cylinders and just run with four, be massive weight saving. Be the devils bike then 666cc.
Lose that jumbo jet front fairing and café racer it, be a real street sleeper ready to eat fireblades and r1s... :ride:

[nzspokes]

ohhh mate.. ya just gona hate what this guys gone n done then, FFS hes put a race number on it, fucks he thinking...

Gawd that sounds great.

[MVnut]

Ya doin it all wrong D

[HenryDorsetCase]

Why would anyone take an iconic bike and turn it into a basket case?

the first ones are iconic. The watered down F2 begs to be customised. Look at market prices: an average unfaired one is 12k, and that guy can't get $8500 for that one: its been on tardme for months.

to quote my hot rodder brother in law (cool Model A Ford, yo! - its in the Steve Holmes book) Restoring is boring.

HJ2Pq0Pe30M

Its like how those old Suzuki KAtanas can be quite cool bikes if a lot of time and effort is put into them.... otherwise just another old Japper.....

[HenryDorsetCase]

Ya wanna do it properly.
Get a machine shop to cut the crank and block so you lose two cylinders and just run with four, be massive weight saving. Be the devils bike then 666cc.
Lose that jumbo jet front fairing and café racer it, be a real street sleeper ready to eat fireblades and r1s... :ride:

one off each end, or two off one side?

[HenryDorsetCase]

Ya doin it all wrong D

Good grief. Does it run?

[MVnut]

the first ones are iconic. The watered down F2 begs to be customised. Look at market prices: an average unfaired one is 12k, and that guy can't get $8500 for that one: its been on tardme for months.

to quote my hot rodder brother in law (cool Model A Ford, yo! - its in the Steve Holmes book) Restoring is boring.

HJ2Pq0Pe30M

Its like how those old Suzuki KAtanas can be quite cool bikes if a lot of time and effort is put into them.... otherwise just another old Japper.....

Please don't mention Krapanas in the same post as CBXs

[R650R]

one off each end, or two off one side?

I was trolling but what the hell, lets take this fecker flat track racing in case two off one side, on the right of the engine :)

http://stblogs.motorcyclistonline.com/files/2012/04/scott-parker-vintage-national.jpg

[Katman]

the first ones are iconic. The watered down F2 begs to be customised. Look at market prices: an average unfaired one is 12k, and that guy can't get $8500 for that one: its been on tardme for months.


True, but I wasn't actually talking about the CBX.

If I had a spare 14g I'd own the RD in a heartbeat.

[SPman]

Ah fuck it - 170 Hp @ 20,000 rpm

<iframe src="//www.youtube.com/embed/BYODFzLv3bY" allowfullscreen="" frameborder="0" height="315" width="560"></iframe>

[scumdog]

Ya doin it all wrong D

Now THAT really got me excited, where can ya buy one? !!:banana::banana:

[jellywrestler]

Ya wanna do it properly.
Get a machine shop to cut the crank and block so you lose two cylinders and just run with four, be massive weight saving. Be the devils bike then 666cc.
Lose that jumbo jet front fairing and café racer it, be a real street sleeper ready to eat fireblades and r1s... :ride:

your calculators fucked, it'll be closer to 698cc.

[Laava]

so... heres what Id do, slip the 1000/6 into the R and match the CBX faring to R colours... or fit the tail section of the R to the thour and colour match the X fairing to the R, then sell on the CBX1100 as Id keep the CB1000R :facepalm:

http://www.trademe.co.nz/Browse/Listing.aspx?id=740500153
http://www.trademe.co.nz/Browse/Listing.aspx?id=741167933

end result... 297964

only I'd fit the pipe masters to it... <iframe width="420" height="315" src="//www.youtube.com/embed/KG8oNz5oyQ8" frameborder="0" allowfullscreen></iframe>

Or..........

http://www.youtube.com/watch?v=OEe6c3KIUB4&sns=em

[dangerous]

Or..........yeahhhhhhh... but, it needs 12 pipes :devil2:

[pritch]

That's impressive. There's some clever bastards about.

[FJRider]

Why would anyone take an iconic bike and turn it into a basket case?

honda riders ... eh .. :lol:

[FJRider]

Ya doin it all wrong D

Brakes might need an upgrade ... :laugh:

[Captain_Salty]

my boner goes to this naked with gsr headlight

http://i59.tinypic.com/2ekpx5h.jpg

https://www.youtube.com/watch?v=kPid1kIJqZk,

[Captain_Salty]

..........

[Katman]

my boner goes to this naked with gsr headlight


Nice motor.

[cheshirecat]

and the buggers got the MV I covet

Ah fuck it - 170 Hp @ 20,000 rpm

<iframe src="//www.youtube.com/embed/BYODFzLv3bY" allowfullscreen="" frameborder="0" height="315" width="560"></iframe>