6v Handlebar heaters??

[Muzz67]

Cant seem to find any 6v bar warmers.
fitted a 12v set to a6v XL250 years ago. Took AGES to warm a little bit.
Anyone know of any?
Cheers,
Muzz.

[AllanB]

Doubt they exist. 6v are trailies still 6?

[FJRider]

No electrical power required ...

[AllanB]

Despite the ones above being the biggest I have ever seen you can still get them.

http://www.twistedthrottle.com/oxford-handlebar-muffs-for-motorcycles

[spanner spinner]

get some Daytona hot grips but you need the 2 level heat control type (see link) http://daytona-global.com/products/?page=Products_SubCategs&mfrID=9&categID=13

these are a 6v grip and they wire them in series for the low setting you would just have to run them on the high setting most of the time. the other units have a 12v controller and will not work on a 6v bike but the 2 level have a mechanical switch and won't care if they are connected to 6v or 12v.

[Muzz67]

Thanks for the help folks.

[Muzz67]

http://i.gyazo.com/69aa7c3ce278bfb7578eedf458af74ea.png