GSX 250 (invader) parts not available

[Puddles]

Hey all, first post

Rocker cover gaskets for the gsx250 invaders (aircooled twin) no longer available. Pretty much signalling the death of these engines and bikes.

Anyone know of any sources of new rocker cover gaskets for these? Does a GS500 engine fit in the hole?

Cheers

[pete376403]

Gasket paper from Repco, hole punches from the same place, decent scissors - make your own

[Puddles]

Apologies, this is from 2000 up. Moulded rubber with D shapes for the camshafts, paper no bueno

[husaberg]

Apologies, this is from 2000 up. Moulded rubber with D shapes for the camshafts, paper no bueno

Vesrah and other companies like cosmetic, athena do aftermarker gaskets and seals
http://www.vesrah.tokyo/product-line/gaskets/

that said it seems available to me
https://www.bike-parts-suz.com/suzuki-motorcycle/250-MOTO/INAZUMA/2014/GW250-L4-P28-/ENGINE-TRANSMISSION/CYLINDER-HEAD/8652000/8652002/M/4209

[Puddles]

Had my hopes up there with the second link, but no, the 2000-2006 nz aircooled gsx250 has sparkplugs centre mounted. and timing chain on the RH side.

Basically they are an NZ only motor so international sites have never heard of the bike or engine. Thanks tho.

[husaberg]

Had my hopes up there with the second link, but no, the 2000-2006 nz aircooled gsx250 has sparkplugs centre mounted. and timing chain on the RH side.

Basically they are an NZ only motor so international sites have never heard of the bike or engine. Thanks tho.

No idea but it might be an Indonesian or simiilar model.
i see they did an air-cooled model single based on what looked like a GN250
called a gsx250.

[jellywrestler]

Hey all, first post

Rocker cover gaskets for the gsx250 invaders (aircooled twin) no longer available. Pretty much signalling the death of these engines and bikes.

Anyone know of any sources of new rocker cover gaskets for these? Does a GS500 engine fit in the hole?

Cheers

whats the part number?

[Puddles]

11173-16e00