GSXR tank wanted

[cowpoos]

hey guys and gals.... I need some help finding a straight k4/k5 gsxr tank...for 600/750 [I think the k3/k4 thou fits aswell]

anyone know of anything......

[Coyote]

Trademe .

[Deano]

You need help alright bro.....ohh a petrol tank. Right.

Could you bodgy an NSR tank onto it ?

I mean there's not much left of it now. Did you know the single sided swingarm bolts straight into a CBR400 ? And those magnesium wheels.....mmmmmmmm :dodge:

[Fatjim]

You want a straight tank? Was the gay one not good enough.

Homophobe!

[cowpoos]

You need help alright bro.....ohh a petrol tank. Right.

Could you bodgy an NSR tank onto it ?

I mean there's not much left of it now. Did you know the single sided swingarm bolts straight into a CBR400 ? And those magnesium wheels.....mmmmmmmm :dodge:
Grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr rrr!!!!!

but hey....really the only thing that will make that bike of yours faster is A: put a suzuki or kawasaki engine in it or B: let me race it :nya:

[cowpoos]

Trademe .
nope




6 characters

[jimbo600]

These guys could well have one

http://www.victorianmotorcyclewreckers.com.au/

[inlinefour]

Grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr rrr!!!!!

but hey....really the only thing that will make that bike of yours faster is A: put a suzuki or kawasaki engine in it or B: let me race it :nya:

Keep trying poos, I'm sure you'll get there in the end. Don't like you chances of finding a tank, the only decient ones are on gixxers yet to be crashed... :done:

[Deano]

Grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr rrr!!!!!

but hey....really the only thing that will make that bike of yours faster is A: put a suzuki or kawasaki engine in it or B: let me race it :nya:

I thought that would get a reaction. :yes:

My engine is in bits at the mo - rings might need replacing, either that or valve guides/stem seals causing all that smoke, plus the chain is absolutely rooted which will give me a bit more power.

Considering my best lap time from Saturday is pretty much on par with 1st and 2nd place in the Pre 89 Jnr championship, and it was my first time racing, and 2nd day on the bike,

A: I don't really think I need any more power......... and,

B: I don't want it trashed thanks.......:shutup:

[cowpoos]

B: I don't want it trashed thanks.......:shutup:

oh...that hurt bro....that hurt...

[Deano]

oh...that hurt bro....that hurt...

Come on now.....there there.....:baby: :hug:

You have broad shoulders mate, take it on the chin.

Are you under water over there yet ?

[cowpoos]

Come on now.....there there.....:baby: :hug:

You have broad shoulders mate, take it on the chin.

Are you under water over there yet ?
humpf!!!!.....nah....I preffer to sulk for a while!


yeah....fucking rain....don't really wanna talk about that either....

[boomer]

here you go.. a tank for gixxer riders :)

Dovers only had it a year or so so it should still be 'structurally' ok

here biach :scooter: (http://www.kiwibiker.co.nz/forums/showpost.php?p=463595&postcount=83)

[Colapop]

How much can a tank be customised to fit? I mean how difficult would it be? Is it a case of getting ahold of someone with a tig welder?

[Brian d marge]

What model do you have ...there is a GSXR 1000 on the Auctions here , but the buggers want 38 000 yen ..

But the older aor smaller models are around 10 000 yen ...MAYBE... dot dot dot ...a tank from a 400 may fit????

or failing that Is your tank completely unrepairable , ??? Large hole in bottom and a skilled panal beater???

Stephen

[cowpoos]

What model do you have ...there is a GSXR 1000 on the Auctions here , but the buggers want 38 000 yen ..

But the older aor smaller models are around 10 000 yen ...MAYBE... dot dot dot ...a tank from a 400 may fit????

or failing that Is your tank completely unrepairable , ??? Large hole in bottom and a skilled panal beater???

Stephen
tanks gunna cost $500+ to repair.... I was told I should get a second hand one for $250-300....new ones are $1298 + a couple of weeks for delivery....so that why I'm looking second hand at the moment

[Deano]

or failing that Is your tank completely unrepairable , ??? Large hole in bottom and a skilled panal beater???

Stephen

Still holds gas don't it Poos, just not as much now ?

And it ain't quite so purdy no more.

[cowpoos]

And it ain't quite so purdy no more.
personally I always thought it was a butt fuckin ugly paint scheme.....

[Sensei]

Give Shaun off here a call or PM . I'm sure he should have something & will be able to give ya some Excellent tips on how to ride as well !!

[Drew]

Give Shaun off here a call or PM . I'm sure he should have something & will be able to give ya some Excellent tips on how to ride as well !!
He dont need tips on how to ride, the amount of time and money his suspension owes him, the fuckin thing should ride itself around corners!!!!

[Fatjim]

I heard it does. Poos is just ballast for the corners.

You selling your old can now Poos?

[Deano]

Give Shaun off here a call or PM . I'm sure he should have something & will be able to give ya some Excellent tips on how to ride as well !!


He dont need tips on how to ride, the amount of time and money his suspension owes him, the fuckin thing should ride itself around corners!!!!



I heard it does. Poos is just ballast for the corners.

You selling your old can now Poos?

OMFG !! Just wait till Poos gets back from pulling titties.

:gob: :ar15: :jerry:

[Shaun]

Why, Cut the thing open from the bottom, beat out dents, fill small dents with bog of some discription, SOLDIER bottom of tank back up, $13.95 spray cote paint tin, and hay presto

Dam farmers

[Shaun]

Don't waste to much time and money on it mate, it is going down again!

[Two Smoker]

Sorry mate, only got dented ones... and my dented ones are a fuckload worse than yours...

[cowpoos]

Give Shaun off here a call or PM . I'm sure he should have something & will be able to give ya some Excellent tips on how to ride as well !!

would love to spend time with shaun getting riding tips actually.....but you probally need them more than me from what I hear from alot of people... lmao


He dont need tips on how to ride, the amount of time and money his suspension owes him, the fuckin thing should ride itself around corners!!!!

and yet you still remain ignorant my beliverent friend....


I heard it does. Poos is just ballast for the corners.

You selling your old can now Poos?

don't talk to me about ballest lad....your twice the man I am[in mass/volume]


Why, Cut the thing open from the bottom, beat out dents, fill small dents with bog of some discription, SOLDIER bottom of tank back up, $13.95 spray cote paint tin, and hay presto

Dam farmers

do I empty the tank first?


Don't waste to much time and money on it mate, it is going down again!

as much as everyone on here is gunna take that as a dig at me....I know what your getting at....and your right....


Sorry mate, only got dented ones... and my dented ones are a fuckload worse than yours...

wanna start a race team?? we'll call it "broke cunts with dented tanks racing"

[cowpoos]

OMFG !! Just wait till Poos gets back from pulling titties.

:gob: :ar15: :jerry:
wanna come over and drinks some piss? oh and pick up a doz of tui's on the way would ya!

[Deano]

wanna come over and drinks some piss? oh and pick up a doz of tui's on the way would ya!

Sorry bro but already half sozzled. Need an early night too. Brain is hurting a bit after getting conflicting advice about my cam gears and tensioners - leave them off or put them back on.

www.400.greybike.co.uk/forum

Not sure if my competition is being helpful or trying to pull a fast one.

Shaun - know anythng about CBR400RR's and cam tensioners ?

[Sensei]

would love to spend time with shaun getting riding tips actually.....but you probally need them more than me from what I hear from alot of people... lmao

You hear about as much Fucken shit as you talk !!

[cowpoos]

Sorry bro but already half sozzled. Need an early night too. Brain is hurting a bit after getting conflicting advice about my cam gears and tensioners - leave them off or put them back on.

www.400.greybike.co.uk/forum

Not sure if my competition is being helpful or trying to pull a fast one.

Shaun - know anythng about CBR400RR's and cam tensioners ?
buggar....I have no piss.....and chicky has the car and is away for a few days... :(

can ya find a workshop manual on the net for ya bike?

[cowpoos]

You hear about as much Fucken shit as you talk !!
nah....thats truthfully what I've heard from a few people....

[Sensei]

.....but you probally need them more than me from what I hear from alot of people... lmao


nah....thats truthfully what I've heard from a few people....

First ALOT now AFEW ??? . I rest my case !! Only Jimbo & Deano have anything worth listerning too as they are 2 top guys & excellent riders & the only Guys off here that I have ridden with , with anything worth listerning too If they say I'm slow then so be it . But to take shit from you is a Fucken laugh . Haven't made a point of taking the piss out of you crashing yet & want !! If you put half as much effort into riding as ya do about worry about me you would be a GP Star !!! Just get on with it !

[Shaun]

For both you Wankers

Sensei is a dam fine road rider, I gave him my new K6 GSXR600 for a ride, if I thought he was crap, I would never have leant him it!

Cowpoos is a dam fine track rider who has got to fast times in a very short time, and if you want to go faster yet, there will be more crashes to come dude.

Now piss off both of you

[MattRSK]

Well said. Here have a beer :drinkup:

[cowpoos]

For both you Wankers

Sensei is a dam fine road rider, I gave him my new K6 GSXR600 for a ride, if I thought he was crap, I would never have leant him it!

Cowpoos is a dam fine track rider who has got to fast times in a very short time, and if you want to go faster yet, there will be more crashes to come dude.

Now piss off both of you
sorry dad....erm....I mean shaun......I was only teasing him like usual...... thats the first time he's bitin in a long time [and for the record....he gets rep for a good bite from me...lol]

[Shaun]

:rockon: you soughted that tank Yet? YES, drain it first and fill with water for a few hours before you cutting the bottom open

[mikey]

fuck your a homo. theres nothing wrong with your tank. it doesnt leak an its stuck in place. id be a bit more worried about your subframe, get it welded, duct tape your fairings back together, get another clip on, an get back on the track. use your head a little next time. save spectacular crashes for when the video camreas rolling......

[Two Smoker]

fuck your a homo. theres nothing wrong with your tank. it doesnt leak an its stuck in place. id be a bit more worried about your subframe, get it welded, duct tape your fairings back together, get another clip on, an get back on the track. use your head a little next time. save spectacular crashes for when the video camreas rolling......


110% fucking agree with Mikeys comment (especially the homo part)... Pretty farking hard to believe hehehe

These wank fests are funny... I wish i could ride a bike... but sadly i need training wheels...

[skelstar]

Streetfighter.

10ch

[Deano]

Sensei is a dam fine road rider, I gave him my new K6 GSXR600 for a ride, if I thought he was crap, I would never have leant him it!

Cowpoos is a dam fine track rider who has got to fast times in a very short time, and if you want to go faster yet, there will be more crashes to come dude.

Now piss off both of you

:yes:


duct tape your fairings back together

and your foot to the footpeg if necessary eh Mikey ?...


110% fucking agree with Mikeys comment Pretty farking hard to believe hehehe


I'm well impressed. Well said Mikey.

[Fatjim]

so the concensus is to leave it as it is as your gonna drop it again anyway. I think you already knew this but with Aria away you needed a bit of luv and attention didn't you possum?

[Pex Adams]

Brain is hurting a bit after getting conflicting advice about my cam gears and tensioners - leave them off or put them back on.

www.400.greybike.co.uk/forum

Not sure if my competition is being helpful or trying to pull a fast one.

Shaun - know anythng about CBR400RR's and cam tensioners ?

Deano, didn't that bastard that sold it to you, give you some advise about the what to do with honda bikes???:Pokey:

[Drew]

[quote=cowpoos;732615]and yet you still remain ignorant my beliverent friend....
Dude, WTF?! You sure you dont maybe mean, beligerant, (spelling maybe incorect), if so/not, tell us what the word you meant to use means.

If ya wanna use the adult type talk, use it right.

ps.

That last bit was, condesending, and perhaps a little, (spelling concern here) fececious. (that speling looks wrong to me, but meh, the humor will not be lost on all.)

[Fatjim]

Now piss off both of you


Thats the second time I've heard Shaun say this to Poos. :rofl: