what to do with the zxr750

[FROSTY]

Guys the ol brain has turned to mush, Advise here pleease.
my options are 1) get the rolling chassis in wellington shipped up and find the time to fit the motor myself.
2)see if white trashes work can put the two together and ship motor down
3) ask the welly guys to fit the motor for me and ride her back up to dorkland
4 Something I havent thought of

[James Deuce]

Me and celticno6 have no life or hobbies, and I need an excuse to buy a torque wrench :)

I'll ask celtic before I volunteer him though.

[Storm]

Get it working asap. I am without my bike at the moment and its killing me ! :cry:

[FROSTY]

Me and celticno6 have no life or hobbies, and I need an excuse to buy a torque wrench :)

I'll ask celtic before I volunteer him though.
yes ya do dude--rebuilding the cbr600 for me :killingme

[FROSTY]

shit 5 to one on sendin the motor down :scooter:

[Paul in NZ]

Not being used to these new fangled machines with more pistons than is strictly required in a proper motorcycle..... How long do you think it will take to do the transplant? (assuming you had all the tools and the patient was preped)

ie Is this a major jobbie?

Paul N

[James Deuce]

Not being used to these new fangled machines with more pistons than is strictly required in a proper motorcycle..... How long do you think it will take to do the transplant? (assuming you had all the tools and the patient was preped)

ie Is this a major jobbie?

Paul N

You bring the grimed fingernails, and I'll bring the beer.

[aff-man]

I will help if i can. I had to transplant a vt250 engine once. It took a whole day for me nd CK to do it but then again it was the first real work i did on a bike so we did it slow. Not to difficult unless you got a bad back :killingme

[riffer]

So counting Jim2, Paul, WT and me, that's four of us.

Who's going to explain it to the wives?

Bags not me... :wacko:

[FROSTY]

Im thinking with the right tools and manpower itll be a 3 hour job
It took me 3 hours to get the motor out of the frame but a fair few bits n bobs were pretty badly bent N twisted

[FROSTY]

Has anyone actually fitted a zxr motor? --Ive actually never fitted a 750 donkey before

[Cajun]

i have
90 zxr750

[White trash]

So counting Jim2, Paul, WT and me, that's four of us.

Who's going to explain it to the wives?

Bags not me... :wacko:

Who the fuck put my hand up?!

Only thing I'm good for is destroying perfectly good bikes, not fixing 'em!

I'll road test it for ya once the lads are finnished, Frosty. Bit of a comparrison against mine, you understand.....

[FROSTY]

wasn't me dude -the idea of the competition putting the ol scoot together is scarey :devil2: :devil2:

[FROSTY]

Who the fuck put my hand up?!

Only thing I'm good for is destroying perfectly good bikes, not fixing 'em!

I'll road test it for ya once the lads are finnished, Frosty. Bit of a comparrison against mine, you understand.....
AHH I figured it out WT--It was ya wifey--she wanted a nite off to go out clubbing :first:

[Paul in NZ]

AHH I figured it out WT--It was ya wifey--she wanted a nite off to go out clubbing :first:

Can't be that... It's too early in the season for baby seals...

:eek5:

Let me know if I can help...

Paul N

[riffer]

Has anyone actually fitted a zxr motor? --Ive actually never fitted a 750 donkey before
I'll have a talk with Verne - he pulled the motor out of the frame. We'll see if he can come and give us a hand to put the motor in.

That is, of course, if Siobhan will let him ..... :whistle:

[FROSTY]

uM GUYS - I haven't even asked you guys--I mean Im like pretty embarressed really :o
So Um er guys could you guys fit the motor for me? :love2:
My thinking is to ship the motor down this week to welly
Where -still to be decided --I mean welly is a small town isnt it??
Then fly down there on a saturday night -(If ya don't have an airport I could parachute in) and ride up on the sunday.
That should give me a full day to get back up to dorkland. -half a day to get to the bombays the other half to get through the traffic to home

[Paul in NZ]

I'll gladly help but I see danger here...

It's not fitting the motor that will take the time, it's finding all the right bolts and shit from the pile of munt left over. Unless you took the motor out it's pure guess work what goes where.

There is bound to be a problem with the throttle cable or some shit like that.

I don't even want to guess about a service so it's rideable....

I'm an OHV guy. DOHC scares me shitless and as for 4 carbs... fark!

Anyone else want to put there hands up! (no, not there)

[White trash]

uM GUYS - I haven't even asked you guys--I mean Im like pretty embarressed really :o
So Um er guys could you guys fit the motor for me? :love2:
My thinking is to ship the motor down this week to welly
Where -still to be decided --I mean welly is a small town isnt it??
Then fly down there on a saturday night -(If ya don't have an airport I could parachute in) and ride up on the sunday.
That should give me a full day to get back up to dorkland. -half a day to get to the bombays the other half to get through the traffic to home

Ummm, I'd want the motor for a week before you turn up.

Send it to my place of work and I'll get it sorted.

[FROSTY]

Ok coolies--hey who do you use for shifting motors ?
About the nuts n bolts thing-I could attache a bag full of the ones i pulled off

[White trash]

Ok coolies--hey who do you use for shifting motors ?
About the nuts n bolts thing-I could attache a bag full of the ones i pulled off

Just ring a freight company, such as Mainfreight or whatever. They may ask you to del the motor to them and strap it on a pallet.

Just sort the fucken thing so I can have a ride :lol:

[FROSTY]

Well for good or bad Ive bitten the bullet---the engine is as we speak winging its way down to wellington.
Its adddressed-attention White trash C/o the bike shop--wellington.---Im sure itll find its way to the right place.
attached are a set of ice tyres--I reckon Im gonna need em to ride it back up.

[White trash]

Guess what turned up today? On me doorstep addressed "White Trash @ Bike shop, Welling-town"

It's here. Now I better head up to Upper Hutt and grab the main bit off Vern.

The project is underway! Wahoo.

Just so ya know, Frosty, I'm using this as a training mission to teach the wife how to chuck a bike together badly. :whistle:

[Motoracer]

Guess what turned up today? On me doorstep addressed "White Trash @ Bike shop, Welling-town"

It's here. Now I better head up to Upper Hutt and grab the main bit off Vern.

The project is underway! Wahoo.

Just so ya know, Frosty, I'm using this as a training mission to teach the wife how to chuck a bike together badly. :whistle:

Make sure that she does most of the important work on it!

P.S. Why not let the kids help out too, I am sure that it'll be a great family fun project! :niceone:

[White trash]

Make sure that she does most of the important work on it!

P.S. Why not let the kids help out too, I am sure that it'll be a great family fun project! :niceone:

Ahh the kids.

They've already been a great help by dropping their marbles into the very open and exposed inlet manifolds.

Who the fuck taught you to transport a motor, Frost?

[FROSTY]

Did i say its a zxr motor--WT thats the 1100 suzi motor you wanted for your 7 fiddy so I figgered.... Oh shit is this pm or forum :eek:

[White trash]

Did i say its a zxr motor--WT thats the 1100 suzi motor you wanted for your 7 fiddy so I figgered.... Oh shit is this pm or forum :eek:

Well actually. I reckon *you've* been had 'cause that motor looks too small for a 7 fiddy to me. I rekon they've done a 400 transplant when you weren't looking.

Fuck yeah, you're gonna cut some quick lap times on a 400 motovated 750 chasis :killingme

[FROSTY]

well DONT crack the lid offf--I don't want ya seeing the M##$#Y stuff in there