1999 dr650se parts wanted

[dino3310]

looking for a belly plate,tail light, number plate holder and light,what ever you have i might need (bought a rough one looking at getting her back on the road with a tight budget).cheers Deano.

[Crisis management]

Before you go too far, make sure it is possible to register the bike here. If it was sold new in NZ it should be achievable but there are a number of american imports here (speedo in MPH) that, unless you have all the import documentation, are impossible to register here. (speaks from experience!)

Other than that I don't have any parts, but the wrecker in Rotorua (Andersons?) wrecked one not too long ago and he's good to deal with.

Good luck!

[chris]

I can source a rear rego plate, light holder guard thingy. Can also get fork gaiters.

[dino3310]

Before you go too far, make sure it is possible to register the bike here. If it was sold new in NZ it should be achievable but there are a number of american imports here (speedo in MPH) that, unless you have all the import documentation, are impossible to register here. (speaks from experience!)

Other than that I don't have any parts, but the wrecker in Rotorua (Andersons?) wrecked one not too long ago and he's good to deal with.

Good luck!

took your advice and checked it out,aaaaaarrrrrrrrr f*#@+k,thanks you just saved me quite a few extra $$$$,i'm absolutly gutted ,i've sent out some emails to try and trace back to the original owner ,bit of a long shot but you never know he might have the import papers filed some where,fingers are crossed. If i cant get her regoed i'll use her for MX.

[dino3310]

I can source a rear rego plate, light holder guard thingy. Can also get fork gaiters.

thanks chris, will see how i get on with the rego first.

[chris]

If i cant get her regoed i'll use her for MX.
Errr, excuse me? MX?

I've just been out to the Sandpit (Woodhill) for a shufty at the new facilities and put in a lap of the convict track and semi-constructed MX track on my DR. Poor old girl didn't know what had hit her!

[dino3310]

:yes: only place i can ride at the moment,my mate picks me up on his way,
i can get round patetonga on the DR better than i can on his rmz250 ,
i dont like these light weight rockets,the DR got smoother power delivery
more torque, less gear changing plus im just cruising injoying the ride, i,m just use to the bigger thumper,plus i got no choice till i can save some more $$ for a road worthy one.

[dino3310]

Errr, excuse me? MX?

I've just been out to the Sandpit (Woodhill) for a shufty at the new facilities and put in a lap of the convict track and semi-constructed MX track on my DR. Poor old girl didn't know what had hit her!

actually the more i think about it the keener i get,one for the road and one for the track. work the motor, ohlins shocks i reckon i could get her in the top ten on club days,it would eat the mercer sand trap.could be a columb
for KR,i could be the first to get sponsered on one for mx (did i mention i dream alot)

[dino3310]

took your advice and checked it out,aaaaaarrrrrrrrr f*#@+k,thanks you just saved me quite a few extra $$$$,i'm absolutly gutted ,i've sent out some emails to try and trace back to the original owner ,bit of a long shot but you never know he might have the import papers filed some where,fingers are crossed. If i cant get her regoed i'll use her for MX.

The guy i bought it of said he got it from a bloke in henderson auckland but cant remember his name, so if the bloke in henderson
is reading this give us a buzz or if someone might recall the bike let me know,any info would be apreciated the bike is:
1999 SUZUKI DR650se chassis no JS1SP46A2X2100511
it is an american import.

[dino3310]

sorted owner saw thread,but still unable to rego at this stage

[dino3310]

turns out compliance wont let the bike vinn without original import papers,
so im just gonna get the torque limiter put in give her a service and sell her on.would love to keep her as shes a bit faster than a standard DR but i plan to do 70% on road, cant offord two bikes so out she goe's, anyway thanks for your help guys its good to know where in a community that helps each other out. RIDE ON :rockon: