OK, bit of a puzzle.

[homer]

I was looking for a thread to excerise the brain
so ive come up with this, post a pic of a part in close up and lets see if we can guess it or work out what the part actually is
I got the idea after a post i saw tonight .
So thought why not .
They dont have to be complicated just a simple pic.

[98tls]

Baffle?..............

[homer]

quite correct
would have been better if id got the pics in the day light

If anyone else has pics post them as it will get hard to post pics by my self

[homer]

hows about this

[98tls]

Hang on whilst i email that pick to my mate with a Bandit:innocent:Gotta be brake cylinder or thereabouts.

[T.W.R]

Hang on whilst i email that pick to my mate with a Bandit:innocent:Gotta be brake cylinder or thereabouts.

:shutup: geesh 98 go have a look at your XS then you'll know ! It's the left hand side handle bar clamp :yes:

[homer]

Oh yeah
just to good
it is

[homer]

hows about this

[98tls]

:shutup: geesh 98 go have a look at your XS then you'll know ! It's the left hand side handle bar clamp :yes: :blank:damn,never considered it,just saw Bandit in the right hand corner and went with that,need to go out the shed and snap a few pics of the ever increasing number of bike bits out there but its pissing down,and i am a lazy bugger.

[Subike]

brake pedal return spring,

[homer]

brake pedal return spring,

Um .... no keep trying
good guess

[98tls]

Sidestand/centerstand return spring?

[homer]

Sidestand/centerstand return spring?

Um ....no
keep trying

[98tls]

Um ....no
keep trying :Oi:doing my head in this,its so bloody obvious but :crybaby:i cant work it out.

[RiderInBlack]

Foot peg spring

[T.W.R]

hows about this

R/H foot peg mount/pivot pin


:blank:damn,never considered it,just saw Bandit in the right hand corner and went with that,need to go out the shed and snap a few pics of the ever increasing number of bike bits out there but its pissing down,and i am a lazy bugger.

:lol: thought you would have forgotten what they were (standard bars :rolleyes:)

What's this then ?
I'll show the full pic when guessed

[Subike]

Pillions foot peg retaining spring

[homer]

R/H foot peg mount/pivot pin



:lol: thought you would have forgotten what they were (standard bars :rolleyes:)

What's this then ?
I'll show the full pic when guessed

Very correct right hand foot peg mount

[98tls]

R/H foot peg mount/pivot pin



:lol: thought you would have forgotten what they were (standard bars :rolleyes:)

What's this then ?
I'll show the full pic when guessed :bash:Damn,ok first thought is a can of something made by CRC..........

[Subike]

R/H foot peg mount/pivot pin



:lol: thought you would have forgotten what they were (standard bars :rolleyes:)

What's this then ?
I'll show the full pic when guessed

a bent inlet or exhaust valve

[T.W.R]

:bash:Damn,ok first thought is a can of something made by CRC..........

just think "that really sickening feeling when your riding your bike" :crazy:

[homer]

R/H foot peg mount/pivot pin



:lol: thought you would have forgotten what they were (standard bars :rolleyes:)

What's this then ?
I'll show the full pic when guessed

can of crc 5.56

[T.W.R]

a bent inlet or exhaust valve


:2thumbsup One (exhaust) of 6 bent valves when the camchain let go on the ZXR a few years back :crybaby:

[homer]

oh shit
guess the can of fix it in the back ground didnt help .

[98tls]

ok...............

[98tls]

oh shit
guess the can of fix it in the back ground didnt help . :lol:Got me to mate,never noticed the other:girlfight:

[RiderInBlack]

Ok what is this? Extra points for knowing exactly what bike it was on.

[T.W.R]

oh shit
guess the can of fix it in the back ground didnt help .


:lol: Fark NO!!!! :pinch: plenty of hours in the shed & a fair hunk of coin got it better than it was to start with :cool:

[homer]

ok...............

ok im guessing one is break fluid and the other is to clean the helmet visor

[T.W.R]

ok...............

the last samples you were meant to take to the doctor :crazy:

[98tls]

:buggerd:No and no.

[homer]

Ok what is this? Extra points for knowing exactly what bike it was on.

im wondering if has something to do with the break or clutch lever

[T.W.R]

Ok what is this? Extra points for knowing exactly what bike it was on.

something external coz you didn't clean the polish out of the ribs on the tabs :rolleyes:


:buggerd:No and no.

touch-up kit for your paint work ????

[RiderInBlack]

ok...............
Two pot resin?

[98tls]

[QUOTE=T.W.R;1524426



touch-up kit for your paint work ????[/QUOTE] Nope............

[Subike]

you use every time you ride

[98tls]

Two pot resin? Nope...........Clue.........arrived today with something else from the states like a breath of fresh air.

[homer]

you use every time you ride

I say its a piece of the break light switch

[98tls]

Ok what is this? Extra points for knowing exactly what bike it was on. Any chance of a clue mate.....got me stumped.

[RiderInBlack]

something external coz you didn't clean the polish out of the ribs on the tabs :rolleyes:Yer but what on what?

im wondering if has something to do with the break or clutch lever No

[Squiggles]

you use every time you ride

Ignition switch

[homer]

ok...............

is it a car air freshner , its gotta be a fucken strong brew if its for a motor bike

[98tls]

is it a car air freshner , its gotta be a fucken strong brew if its for a motor bike Nope,for a motorcycle........the clue should have given it away.What you said is so close.

[RiderInBlack]

Any chance of a clue mate.....got me stumped.The bike is the easy bit for those that know me:shutup:

[Subike]

I say its a piece of the break light switch

no.not an electrical switch

[homer]

Ok what is this? Extra points for knowing exactly what bike it was on.

dose it hold the bike seat on

[RiderInBlack]

Nope...........Clue.........arrived today with something else from the states like a breath of fresh air.Special Vizer Cleaners?

[RiderInBlack]

dose it hold the bike seat on
No but very close. There was 4 off them on that bike. two each side.

[98tls]

Special Vizer Cleaners? Not a Vizer cleaner mate but............

[homer]

No but very close. There was 4 off them on that bike. two each side.

is it locating tabs for the tank

[homer]

ok...............

Break fluid and clutch fluid

[RiderInBlack]

is it locating tabs for the tankNo the seat is closer:rolleyes:

[98tls]

Break fluid and clutch fluid Nope,cmon guys this is real easy.........think breathe.

[Subike]

Air filter box .......

[homer]

Not a Vizer cleaner mate but............

fuel additive ,

[98tls]

Air filter box .......
:shifty:2 bottles filled with a substance an air filter box?:shit:your close.

[homer]

you use every time you ride

is it the thingy for the fuel tank u know

[98tls]

fuel additive , Nope,my mate from Greta valley is close although how 2 bottles made him come up with air filter box i am not sure.

[Subike]

part of a nito kit? ....

[homer]

:shifty:2 bottles filled with a substance an air filter box?:shit:your close.

oil for the air filter

[98tls]

oil for the air filter Wahoo..........you got a greenie.There for cleaning a Pipercross filter.

[homer]

Ok what is this? Extra points for knowing exactly what bike it was on.

ok does it hold or fit the air cleaner

[98tls]

Whilst i ponder the other 2 have a crack at this.

[homer]

Whilst i ponder the other 2 have a crack at this.

did you make a clear clutch window

[Subike]

clutch pack retaining ring or, part of a gearbox gear cluster

[98tls]

did you make a clear clutch window :argue:Damn,well done.

[homer]

yeah i want of these
why isnt it on the bike '

[homer]

clutch pack retaining ring or, part of a gearbox gear cluster

so what about you little thingy
i think its for the fuel cap , the bit that springs the top key bit shut

[Subike]

spot on homer
wasn't too hard

[98tls]

yeah i want of these
why isnt it on the bike ' Mate i have seen similar for a Bandit on a Bandit forum,easy enough if you can get enough to buy one as in do a group buy.The cover for the TL was expensive but we had 30 made which cut the cost down a bit,made in Germany,a bloke in the states made the pressure plate and had retainers anodized.

[homer]

spot on homer
wasn't too hard

the missus actually guessed it
lol

[98tls]

spot on homer
wasn't too hard Damn,knew i had seen one before but...............

[98tls]

the missus actually guessed it
lol :blank::Oi:stop rubbing it in.

[homer]

Mate i have seen similar for a Bandit on a Bandit forum,easy enough if you can get enough to buy one as in do a group buy.The cover for the TL was expensive but we had 30 made which cut the cost down a bit,made in Germany,a bloke in the states made the pressure plate and had retainers anodized.

wicked , yeah the pic i posted is about 800 pound
thats over there , dont look like ill be getting one

[homer]

well im glad this thread fills in a while
ill get some more pics tom , before dark if i can
still have to figure out the black riders one

[98tls]

well im glad this thread fills in a while
ill get some more pics tom , before dark if i can
still have to figure out the black riders one Yea was enjoyable really,go figure,an enjoyable motorcycle related thread on a motorcycle based website in NZ,nice change.:Jerry:

[homer]

yep thats so true

[98tls]

yep thats so true Actually as the provider of "the unsolved one" will surf back and bling it.

[T.W.R]

Ok what is this? Extra points for knowing exactly what bike it was on.

The tabs (1 of 2 either side) on the bottom edge of the grab rail on the CBR1000 (Roxanne) :2thumbsup

[98tls]

The tabs (1 of 2 either side) on the bottom edge of the grab rail on the CBR1000 (Roxanne) :2thumbsup :Oi:probably bloody right,thats it:Pokey:that race bike is coming your way,you get 2 weeks to sort it,least it will give the rest of us a chance to get something right in such threads.

[T.W.R]

:Oi:probably bloody right,thats it:Pokey:that race bike is coming your way,you get 2 weeks to sort it,least it will give the rest of us a chance to get something right in such threads.


:killingme ha luckily I had a magazine test on one handy with a full spread mini poster in the centre so could just make out the bits :msn-wink:

How many bits did you want the trackbike back in ???? :rolleyes:

[homer]

:killingme ha luckily I had a magazine test on one handy with a full spread mini poster in the centre so could just make out the bits :msn-wink:

How many bits did you want the trackbike back in ???? :rolleyes:

so is that the answer ?

probably is , well know tomorrow i guess
well i wouldnt have guessed that

[RiderInBlack]

The tabs (1 of 2 either side) on the bottom edge of the grab rail on the CBR1000 (Roxanne) :2thumbsupSpot on:2thumbsup Not the best pic cause I hadn't cleaned "her" at the time:whistle: But I am on Blue Babe's PC at the moment and all my good one's are back on mine.

[homer]

well ,
its a quite easy object to figure out .
whats the part

[T.W.R]

well ,
its a quite easy object to figure out .
whats the part

15mm M5 allen bolt in the fuel cap flange :dodge:

[homer]

yep correct
Not quite 15 mm