Oxygen sensor bung required

[Taz]

Where can I purchase a bung for the oxygen sensor hole in my link tube? Size is 18 x 1.5.
Cheers
Andy.

[DEATH_INC.]

Where can I purchase a bung for the oxygen sensor hole in my link tube? Size is 18 x 1.5.
Cheers
Andy.
I've got a tap if that's any help......but I'd just go to pitstop or similar and see if they've put a system on something and have the old one that you can raid it from...
Edit: or have I got ya wrong? Do you wanna fit one or do you wanna block it?

[Taz]

Got a hole in the link pipe for the bung but no bung........ Need a bung :)

[TripleZee Dyno]

Got a hole in the link pipe for the bung but no bung........ Need a bung :)
considered a short bolt?

[speights_bud]

Just shoot down to Mitre10 mega, they have an array of nuts and bolts and things, failing that go to somewhere like EDL or another engineering supply outfit. You'll often save big bucks. a cap screw or hex bolt should do it, or if you want it to look pretty get yourself a pretty stainless grub screw and a means of locking it in place, loctite 680 will permanently hold the bugger in there if there's not too much heat involved

[imdying]

Any Dynojet dealer can get one for you... it's a spare part for the Wideband Commander.

[Shaun]

Where can I purchase a bung for the oxygen sensor hole in my link tube? Size is 18 x 1.5.
Cheers
Andy.



I have found the correct fit BUNG through PLUMBERS mate! some thing to do with the thread pitch

[Taz]

Thanks all. The exhaust shop in Pukekohe had them in stock. BMW is all sorted now.
Andy.