View Full Version : Highside No#2
NC
25th February 2005, 09:11
I achived my goal of full pulling the NC30 apart so I could fix it with the help of my sidekick, MrMelon (he does most of the work, I just stand there and look stupid) Anyway, I have been riding the dyrty ole BMX to work. The last time I did this, I highsided my BMX and had 6 weeks off work to nurse my knee back to heath (it's still not right :( ) Anyway I did it again, but this time I did my wrist...lol hurts like a mutha bitch..
I think it's karma, cause I have been getting better at doing jumps...not wheelies though :confused:
vifferman
25th February 2005, 09:13
Oh NC - that's not good! :no:
But it is good to see you back on here! :yes:
How was your low-lying? :spudwhat:
sAsLEX
25th February 2005, 09:13
whats wrong with the NC30?? mines running like a biatch at the mo and needs the carbs fiddled with I think
NC
25th February 2005, 09:14
whats wrong with the NC30?? mines running like a biatch at the mo and needs the carbs fiddled with I think
Starter motor, clutch (hamburger) forks and just a general paint and polish.
syncronising the screw things?
MSTRS
25th February 2005, 09:22
whatever you do, don't screw with the sychronising things
vifferman
25th February 2005, 09:23
whatever you do, don't screw with the sychronising things... unless you know what you're doing.:yeah:
NC
25th February 2005, 09:34
... unless you know what you're doing.:yeah:
Uh oh! :confused:
bungbung
25th February 2005, 09:52
It was MrMelon, NC30 was just watching
vifferman
25th February 2005, 10:04
Uh oh! :confused:
No worries - nothing that can't be refiddled.
Sniper
25th February 2005, 10:09
So you and MrMelon fiddle with each other??
bungbung
25th February 2005, 10:22
So you and MrMelon fiddle with each other??
It seems thusly:
MrMelon (he does most of the work, I just stand there and look stupid)
StoneChucker
25th February 2005, 11:36
So you and MrMelon fiddle with each other??
I don't see anything wrong with that
whatever you do, don't screw with the sychronising things
... unless you know what you're doing.
In my experience, not many people know what they are doing when fiddling with womens "synchronising things".
The fact that NC30 "just stood there and looked stupid", means they weren't being fiddled with properly.
Take care of that wrist NC, as you know they need to heal properly, or they'll give you probs later!
Motoracer
25th February 2005, 11:47
How do you high side a BMX? Was that on dirt or tarseal? Wet or dry?
Even on my MTB, once when I've taken a sharp turn on dry tarseal when going pretty quick, the rear wheel slid just from the corner speed and lean angle, it still came around nicely cause there was no power (turning the rear wheel wheel) involved.
Or was that like landing a jump wrong and you ended up going over the bars?
P.S. Sorry to hear about the injury. Hope you heal well and fast.
sAsLEX
25th February 2005, 12:10
i nearly did it once, fanging it in the rain running late for a ferry when i was bikeless, cut hard left the wrong way into a one way street tryres caught a big white turning arrow and decided to completly loose traction was thinking it was going to lowside, but slid right across the arrow and some slippery seal then gripped in the gutter/curb and bucked around only just holding on
MSTRS
25th February 2005, 12:22
whatever you do, don't screw with the sychronising things
Just to paraphrase (???) myself.....it's best to sychronise things when screwing :confused:
Ms Piggy
25th February 2005, 12:31
Pooooooor you! :hug: Get better soon.
Clearly a case of too much fiddling not enough riding. :yes:
NC
25th February 2005, 13:35
http://203.96.154.213/gallery2/main.php/download/747-2/brokenruth.JPG
Don't go to the dr :confused: shit happens
NC
25th February 2005, 13:36
So you and MrMelon fiddle with each other??
I'll give you bad rep points, you lil bastard!
NC
25th February 2005, 13:47
How do you high side a BMX? Was that on dirt or tarseal? Wet or dry?
Even on my MTB, once when I've taken a sharp turn on dry tarseal when going pretty quick, the rear wheel slid just from the corner speed and lean angle, it still came around nicely cause there was no power (turning the rear wheel wheel) involved.
Or was that like landing a jump wrong and you ended up going over the bars?
P.S. Sorry to hear about the injury. Hope you heal well and fast.
The trick peg thing dug into the curb and over I went...
Mongoose
25th February 2005, 13:47
Well done NC30, you just proved you are as dagerous motered as unmotored. Bet you was being all nice an' sensible too??
Hope the wrist dont stay limp fopr to long
Cheers
vifferman
25th February 2005, 13:50
Nice foter! :niceone:
Hope the wristarmthing heals quickly :yes:
Riff Raff
25th February 2005, 13:53
Well done NC30!!!! Oh no, wait, sorry, umm, get better soon and all that stuff - oh and there's only one thing to do now - BEER THERAPY!!! :apint:
jrandom
25th February 2005, 13:53
Don't go to the dr :confused: shit happens
Lookin' good, babe.
Someone hurry up and draw a Kilroy on it.
Sniper
25th February 2005, 13:55
I'll give you bad rep points, you lil bastard!
Sorry NC, I didnt mean anything about it
NC
25th February 2005, 13:57
Sorry NC, I didnt mean anything about it
:lol:
It's all good.. :whocares:
White trash
25th February 2005, 14:11
Bit hard to have one last ride on the thou' in a cast aint it?!
NC
25th February 2005, 17:18
Bit hard to have one last ride on the thou' in a cast aint it?!
I was riding the street magic back from the Dr's with the cast on....Mmmmm Automatic gearing thingees
Joni
25th February 2005, 17:30
Sorry to hear about this buddy....
Remember, pain killers and alcohol.... dont mix well.... or do they??... :lol: :confused:
Get better!
:sunny:
SPman
25th February 2005, 21:05
Well done NC30!!!! Oh no, wait, sorry, umm, get better soon and all that stuff - oh and there's only one thing to do now - BEER THERAPY!!! :apint:
Shouldnt that be - BARE THERAPY!
NC
25th February 2005, 21:11
Shouldnt that be - BARE THERAPY!
Write this down...
NO!
sels1
25th February 2005, 21:18
Bad luck NC - hope it heals soon.
Sure you'll find a good use for that cast....
NC
26th February 2005, 16:24
Update:
I hate this fucken cast
sedge
26th February 2005, 16:35
You weren't riding Melons MTB were you, it tried to kill him too !
Sedge.
wari
26th February 2005, 16:36
I DOnt like werkinon shitt ...
I'm still waitin' furr my 9' crescent to fall outta da bottle brush tree fromda last time I "a-tempt-ed" sump-thin' ... :shake: .. I Thinkda magg-pies mighta tried flogginnit furr derre nest ... dunno ... think they laughfed sump-thin' aboutit bein' ideall furran RSJ ... :spudwhat:
:yeah:
avgas
26th February 2005, 16:44
ah yes, a classic case of anytwowheelscanfuckuuplikethis, if ever i saw one.
dont worry matey, as long as your still alive then whoever is trying to take you out hasnt succeded.
Yes Cast's do suck! :niceone:
Anyhow, get fixed up so that you can act all spontaneous again.
ps : painkillers only make you slower
I DOnt like werkinon shitt ...
I'm still waitin' furr my 9' crescent to fall outta da bottle brush tree fromda last time I "a-tempt-ed" sump-thin' ... :shake: .. I Thinkda magg-pies mighta tried flogginnit furr derre nest ... dunno ... think they laughfed sump-thin' aboutit bein' ideall furran RSJ ... :spudwhat:
:yeah:
I'm going to get wasted and read your reply again :confused:
You weren't riding Melons MTB were you, it tried to kill him too !
Sedge.
Narh, the BMX is just as bad. It tried to kill me in april last year, haha it only fucked my knee up...:D
:confused:
Blakamin
1st March 2005, 20:12
lol... you need to get a safe hobbie... like jumpin busses or sumfin....
heal quick, casts fuck wif your drinkin....
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.