gsxr 1000 engine in a rf900

[bigboost]

will a gsxr 1000 engine fit in a rf900 if i modified the mounts.

[HDTboy]

There's more than enough room if that's what you're asking

[riffer]

According to the sidecar nutters on oldskoolsuzuki.info the better way to go is to use a complete GSXR1100 bottom end, rods, pistons with an RF900 head. There's a small amount of work required to the gasket, but the power boost is ridiculous and if you put the 1993 GSXR750W cam in it and up the jets you're within the same power output as a gsxr1000 anyway.

If you must have a thou, put the RF900 crank, rods, piston and head into a GSXR1100 - 1000cc.

[bigboost]

i want to do a gsxr 1000 motor because it will be bad ass and it can find more parts it.

[James Deuce]

You can lead an American to water.......

[nodrog]

yeap it will bolt straight in.

[pete376403]

You can do anything if you spend enough.

[emaN]

look forward to seeing what front end you put on too, 'cos the standard forks get 'twisty' braking from the speeds the 936 lump will get you to.

[Gubb]

yeap it will bolt straight in.
This man knows what he's talking about.

[cowpoos]

i want to do a gsxr 1000 motor because it will be bad ass and it can find more parts it.
get a gsxr thou....at least the chassis will keep up with the motor that way.

[smoky]

I wonder what the best way to convert a bandit 1200 to EFI is?
Probably pinch everything off a GSXR?

[SARGE]

You can lead an American to water.......

steady on Doocie

[James Deuce]

But you die of thirst on the way because they take FOREVER to get there.

[crazefox]

But you die of thirst on the way because they take FOREVER to get there.

FUCK jimbo ur a bad man