Where to find find GB400/500 parts? Specifically the tank and seats?

[keihatsu]

I live in the US, and probably most of you know, the GB500 is extremely rare here.

Fortunately, I found one but the seat and tank are a little rough. I can probably restore either one, but if I could find a nice used one I think that would be much better.

Doing searches online, it always seemed to bring me to this KiwiBiker, and I remember hearing that were sold here more years then the two here in the US.

Does anyone have any advice on where I could look to find a spare tank or seat?

Thanks for the help guys!

[fridayflash]

hi and welcome keihatsu! yes your right- the gb500 and 400 sold
well over here in '87 and '88 whenn a large shipment was off loaded
here cheaply. i have one and i think there are a few other enthusiastic
owners on this site.are you after a single or dual seat? i know a guy
in my area (napier) who had spare seats a few years ago..ill send
him a text and see if theyre still going

[keihatsu]

Thanks fridayflash for the welcoming!

I am looking for the single seat. Did they have cowls on the bikes that were sold there? I always liked the look of it.

And thanks again for your help!

[CookMySock]

Don't send rare spares out of the country because some yank is too lazy to recover his seat.

Steve

[keihatsu]

Don't send rare spares out of the country because some yank is too lazy to recover his seat.

Steve

It's the cowl that I am really most interested in, but that seems very, very hard to find unfortunately.

And the tanks are just as hard to find as well.

[Taz]

They go for around $300NZD if you can find one......
http://www.trademe.co.nz/Trade-Me-Mo...-222709355.htm

[keihatsu]

Thanks for that Anthrax, I'll have to check that place more often.

I was kinda bummed I missed that one, if I only picked the bike up earlier. But that's okay. If anything, the bike runs really well, and I'm glad I finally found one.

I've been trying to find one for over a year, and the ones that pop are are usually out of my price range as they were usually in mint condition, but very nice to look at!

[Taz]

I see there is one on Ebay at the moment $3000

Much better off with one of these....

[keihatsu]

I wouldn't be surprised if it sold for around $4,500, as I've seen some in the past year that have.

That's a nice looking bike, what is it?

[Paulo]

Hey It you've got a tank and seat just restore them , Take the tank off get it sandblasted bog it and paint it a colour you like, You can get the deacals on the internet (somewhere) also Only the GB400MK11 had the cowling in NZ and those are rare. you' be better off building your own or getting someone to help you out. Much more satisyfing. Good luck.

[keihatsu]

Hey It you've got a tank and seat just restore them , Take the tank off get it sandblasted bog it and paint it a colour you like, You can get the deacals on the internet (somewhere) also Only the GB400MK11 had the cowling in NZ and those are rare. you' be better off building your own or getting someone to help you out. Much more satisyfing. Good luck.

Thanks for letting me know about the cowl.

I'll look into restoring the tank and seat. The seat I am not too worried about, it was the cowl I was mainly looking for and thought the cowl was a standard thing in NZ, like it was here. Thanks for clearing that up.

The tank that's currently on it had rust holes along the seams, but was covered up temporarily. So I though it might be better to find a replacement tank. However I'll look into what it takes to repair the tank in it's current condition.

[HenryDorsetCase]

Don't send rare spares out of the country because some yank is too lazy to recover his seat.

Steve

what the fuck, dude? A guy asks for help, and information, and you're a dick about it? Fuck off!

[Paulo]

I see there is one on Ebay at the moment $3000

Much better off with one of these....

if you ever want to sell that Guzzi anthrax, let me know (really)

[xwhatsit]

Does anyone have any advice on where I could look to find a spare tank or seat?

There's Econohonda -- http://www.econohonda.co.nz . They ship overseas all the time. I wouldn't be surprised if he'd have a few bits and bobs lying around. Send him an email, the parts list on the site dates from 2006 or something silly.

Surely it'd be cheaper and more fool-proof just to get a panel-beater to fix up the tank? Taking the dings out and spraying it costs maybe $NZ300 over here... a tank will go for at least that, and then there's the shipping which will be astronomical and it's not likely to be a perfect tank either.

Nearly all the 2nd-hand GB tanks will have the same damage I'm going to guess you have -- when they're dropped, the clip-ons rotate around the fork stanchion and dig into the tank.

[CookMySock]

what the fuck, dude? A guy asks for help, and information, and you're a dick about it? Fuck off!

Uh huh, what he asked for was sources for rare parts. NZ rare parts.

I'll be a dick about it all I like - keep rare spares in NZ. You fuck off.

Steve