Best way to mount video camera to bike?

**ready4whatever** · 23rd July 2009, 16:30

I've seen some real cool 1st person biker cams on youtube of riders and their journey and i want to do this with mine

any idea how to fix the cam, tape it to the handle bars or what

**mossy1200** · 23rd July 2009, 16:46

Originally Posted by ready4whatever

I've seen some real cool 1st person biker cams on youtube of riders and their journey and i want to do this with mine

any idea how to fix the cam, tape it to the handle bars or what

Dont waste time get a hero procam.Its the size of 2/3 cig pack and light.water proof also
Comes with 5mounts for different sports including helmet.
1hr record onto sd card.

Clip is edited down in size and quality to fit onto youboob
http://www.youtube.com/watch?v=ZPWYmmBIUqo

**tigertim20** · 23rd July 2009, 19:12

you can get a tank bracket, screws in around the gas cp, and you mount ya camera on top og it (it screws on, via the threaded holes in the bottom of your camera).
saw a couple on tardme a while ago, for about $40

**slimjim** · 23rd July 2009, 19:15

can also buy a handle bar bracket off givi ..$39.95 or something close to it

**Headbanger** · 23rd July 2009, 19:25

I have played with helmet cameras of various designs over the years, Im going to just mount the camera on the tank next time. Much better quality.

**aahsv** · 23rd July 2009, 19:32

RAM mount

http://www.ramsolutions.co.nz/

**Molly** · 23rd July 2009, 20:08

As stupid as this sounds (and, come to think of it, as stupid as it was) I drilled holes in my Arai and mounted a f'k off big camera on the side of my lid. Well, I was due a new lid anyway.

The results were quite good but the biggest problem was getting good sound. I bought a separate microphone to mount here there and everywhere. I either got wind noise (not my wind - the wind) or brake noise (when I wanted just the exhaust note). I put music over one of them but Google emailed to say it was copyright protected and should be removed.

Here's one of them:

http://video.google.com/videoplay?do...83804598786492

**tigertim20** · 23rd July 2009, 20:52

Originally Posted by Molly

As stupid as this sounds (and, come to think of it, as stupid as it was) I drilled holes in my Arai and mounted a f'k off big camera on the side of my lid. Well, I was due a new lid anyway.

The results were quite good but the biggest problem was getting good sound. I bought a separate microphone to mount here there and everywhere. I either got wind noise (not my wind - the wind) or brake noise (when I wanted just the exhaust note). I put music over one of them but Google emailed to say it was copyright protected and should be removed.

Here's one of them:

http://video.google.com/videoplay?do...83804598786492

Umm, did you drill the holes when you were wearing it?