Whats the diff between the different crc's?56, 808 etc?
Whats the diff between the different crc's?56, 808 etc?
Dont coat the whole thing in silicone or crc - you will only attract more dirt.
Clean bike with turps - fill up an old sprayer bottle and use an old toothbrush. Squirt it on to rinse off the dirt. Once clean - go over whole bike with a light spray of car cleaner (pref one without a wax) then hose off - simply to remove the film left by the turps. Run the bike upto temp to dry it off.
A dry engine and electrical system is better than one coated in crc with bits of grit stuck to it.
Once your done, it's simple job to put a few drops of light oil on all the moving parts to keep things tip top.
Doesn't turp strip paint?
ok heres the lowdown on degreaser ... i own a mobile car and bike valet business .....The best stuff i have found is the red degreaser 5litre $15 ..TIP THE 5 LITRE INTO A 20 LITRE CONTAINER and fill with water 20 litres of degreaser for $15 ...its great stuff does a great job and wont stain your paint ... but wash it off while its still wet ..been in business for 12 years and this is the best value for money degreaser on the market
if you think life is 2 short , get a taller one
Fatboy Racing
yamahawk racing enterprizes
IM DAM SEXY racing
Fair enough, the voice of reason.
Once mixed, how long does it hold it's cleaning power?
I.E. If you use it commercially, you would probably use it up pretty quickly.
Is that the actual name of the product "Red degreaser"?
Have you tried CT-80? Can you compare the two products?![]()
i would be careful with what you put on the motor/exorsed like crc due to fire risk. i would just wipe it with a rag. silicon is good to polish with but dust will stik to it like shit to a blankit
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks